lkml.org 
[lkml]   [2018]   [Jun]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V2 1/7] mmc: sdhci: add sd host v4 mode
From
Date
On 21/06/18 14:14, Chunyan Zhang wrote:
> On 21 June 2018 at 18:49, Adrian Hunter <adrian.hunter@intel.com> wrote:
>> On 15/06/18 05:04, Chunyan Zhang wrote:
>>> For SD host controller version 4.00 or later ones, there're two
>>> modes of implementation - Version 3.00 compatible mode or
>>> Version 4 mode. This patch introduces a flag to record this.
>>>
>>> Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
>>> ---
>>> drivers/mmc/host/sdhci.c | 6 ++++++
>>> drivers/mmc/host/sdhci.h | 6 ++++++
>>> 2 files changed, 12 insertions(+)
>>>
>>> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
>>> index 2ededa7f..cf5695f 100644
>>> --- a/drivers/mmc/host/sdhci.c
>>> +++ b/drivers/mmc/host/sdhci.c
>>> @@ -3302,6 +3302,12 @@ void __sdhci_read_caps(struct sdhci_host *host, u16 *ver, u32 *caps, u32 *caps1)
>>> v = ver ? *ver : sdhci_readw(host, SDHCI_HOST_VERSION);
>>> host->version = (v & SDHCI_SPEC_VER_MASK) >> SDHCI_SPEC_VER_SHIFT;
>>>
>>> + if (host->version >= SDHCI_SPEC_400) {
>>> + if (sdhci_readw(host, SDHCI_HOST_CONTROL2) &
>>> + SDHCI_CTRL_V4_MODE)
>>> + host->v4_mode = true;
>>> + }
>>
>> At this point the host controller has just been reset which would mean it
>> must be in version 3 compatibility mode, which would mean this code doesn't
>> do anything.
>
> Why is it version 3 mode at this point?

According to the specification, reset clears RW fields to zero.

>
> I've tested this code on the sd host controller which was introduced
> in 6/7 in this patch-set, the result showed that it was v4_mode.
> Moreover without this patch, the Spreadtrum's sdhci driver in patch
> 6/7 couldn't work.
>
> Am I missing something here?

It seems the Spreadtrum controller doesn't clear the "Host Version 4 Enable"
bit upon software reset for all.

Also this seems the wrong way around. The driver should decide whether or
not to use V4 mode and then the "Host Version 4 Enable" bit should be set
accordingly.

V4 has been around so long that we can't just enable all supporting hardware
without risking the possibility it will break some platform. So I suggest
adding a function sdhci_enable_v4_mode() which is called during probe.

>
> Best,
> Chunyan
>
>>
>>> +
>>> if (host->quirks & SDHCI_QUIRK_MISSING_CAPS)
>>> return;
>>>
>>> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
>>> index c95b0a4..128b0ba 100644
>>> --- a/drivers/mmc/host/sdhci.h
>>> +++ b/drivers/mmc/host/sdhci.h
>>> @@ -184,6 +184,7 @@
>>> #define SDHCI_CTRL_DRV_TYPE_D 0x0030
>>> #define SDHCI_CTRL_EXEC_TUNING 0x0040
>>> #define SDHCI_CTRL_TUNED_CLK 0x0080
>>> +#define SDHCI_CTRL_V4_MODE 0x1000
>>> #define SDHCI_CTRL_PRESET_VAL_ENABLE 0x8000
>>>
>>> #define SDHCI_CAPABILITIES 0x40
>>> @@ -270,6 +271,8 @@
>>> #define SDHCI_SPEC_100 0
>>> #define SDHCI_SPEC_200 1
>>> #define SDHCI_SPEC_300 2
>>> +#define SDHCI_SPEC_400 3
>>> +#define SDHCI_SPEC_410 4
>>>
>>> /*
>>> * End of controller registers.
>>> @@ -551,6 +554,9 @@ struct sdhci_host {
>>> u32 sdma_boundary;
>>>
>>> unsigned long private[0] ____cacheline_aligned;
>>> +
>>> + /* Host Version 4 Enable */
>>> + bool v4_mode;
>>> };
>>>
>>> struct sdhci_ops {
>>>
>>
>

\
 
 \ /
  Last update: 2018-06-21 15:17    [W:0.085 / U:9.780 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site