lkml.org 
[lkml]   [2018]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/2] clk: imx6ul: add GPIO clock gates
Hi Fabio

On Sat, Jun 2, 2018 at 4:07 PM, Fabio Estevam <festevam@gmail.com> wrote:
> Hi Michael,
>
> On Sat, Jun 2, 2018 at 11:04 AM, Michael Nazzareno Trimarchi
> <michael@amarulasolutions.com> wrote:
>
>> ull is a preatty new platform so one board was listed. Are you sure
>> that we need?
>
> There are several imx6ul based dts in mainline and it is better if we
> can avoid dtb breakage when possible.
>
> In this case we can avoid the dtb breakage by adding the new clock
> definitions at the end of the file, just like we do for all the other
> imx devices.

Yes, when I add new ul clock I move down ull (that is new), but agree
that this is not possible in general.

Michael

\
 
 \ /
  Last update: 2018-06-02 16:12    [W:0.052 / U:3.432 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site