lkml.org 
[lkml]   [2018]   [Jun]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 8/9] ARM: dts: exynos5250: add DSI node
Date
From: Andrzej Hajda <a.hajda@samsung.com>

The patch adds common part of DSI node for Exynos5250 platforms
and a required mipi-phy node.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Maciej Purski <m.purski@samsung.com>
---
arch/arm/boot/dts/exynos5250.dtsi | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 2daf505..9965eca 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -733,6 +733,27 @@
#phy-cells = <0>;
};

+ mipi_phy: video-phy@10040710 {
+ compatible = "samsung,s5pv210-mipi-video-phy";
+ reg = <0x10040710 0x100>;
+ #phy-cells = <1>;
+ syscon = <&pmu_system_controller>;
+ };
+
+ dsi_0: dsi@14500000 {
+ compatible = "samsung,exynos4210-mipi-dsi";
+ reg = <0x14500000 0x10000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ samsung,power-domain = <&pd_disp1>;
+ phys = <&mipi_phy 3>;
+ phy-names = "dsim";
+ clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI1>;
+ clock-names = "bus_clk", "sclk_mipi";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
adc: adc@12d10000 {
compatible = "samsung,exynos-adc-v1";
reg = <0x12D10000 0x100>;
--
2.7.4
\
 
 \ /
  Last update: 2018-06-19 10:22    [W:0.089 / U:1.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site