lkml.org 
[lkml]   [2018]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/5] ARM: dts: cygnus: Fix PCIe controller interrupt type
From
Date
On 06/12/2018 01:21 PM, Ray Jui wrote:
> Fix PCIe controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom
> Cygnus SoC
>
> Fixes: cd590b50a936 ("ARM: dts: enable PCIe support for Cygnus")

This one is valid

> Fixes: 0f0b21a83ad2 ("ARM: dts: Move all Cygnus peripherals into axi
> bus")
> Fixes: 9c5101f7a253 ("ARM: dts: Reorder Cygnus peripherals")
> Fixes: f6b889358a82 ("ARM: dts: Enable MSI support for Broadcom Cygnus")

And this one too, but the two others, I would probably drop them so we
can get the backports to be possibly applicable as far as when these two
commits can be resolved, does that work?

>
> Signed-off-by: Ray Jui <ray.jui@broadcom.com>
> ---
> arch/arm/boot/dts/bcm-cygnus.dtsi | 20 ++++++++++----------
> 1 file changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
> index 835a6f7..2c4df2d 100644
> --- a/arch/arm/boot/dts/bcm-cygnus.dtsi
> +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
> @@ -256,7 +256,7 @@
>
> #interrupt-cells = <1>;
> interrupt-map-mask = <0 0 0 0>;
> - interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
> + interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
>
> linux,pci-domain = <0>;
>
> @@ -278,10 +278,10 @@
> compatible = "brcm,iproc-msi";
> msi-controller;
> interrupt-parent = <&gic>;
> - interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>,
> - <GIC_SPI 97 IRQ_TYPE_NONE>,
> - <GIC_SPI 98 IRQ_TYPE_NONE>,
> - <GIC_SPI 99 IRQ_TYPE_NONE>;
> + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
> };
> };
>
> @@ -291,7 +291,7 @@
>
> #interrupt-cells = <1>;
> interrupt-map-mask = <0 0 0 0>;
> - interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
> + interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
>
> linux,pci-domain = <1>;
>
> @@ -313,10 +313,10 @@
> compatible = "brcm,iproc-msi";
> msi-controller;
> interrupt-parent = <&gic>;
> - interrupts = <GIC_SPI 102 IRQ_TYPE_NONE>,
> - <GIC_SPI 103 IRQ_TYPE_NONE>,
> - <GIC_SPI 104 IRQ_TYPE_NONE>,
> - <GIC_SPI 105 IRQ_TYPE_NONE>;
> + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
> };
> };
>
>


--
Florian

\
 
 \ /
  Last update: 2018-06-13 21:51    [W:0.073 / U:1.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site