[lkml]   [2018]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v2 0/2] Add display clock controller driver for SDM845
* Removed unused header file includes.
* Moved the frequency table macro to a common file [1].
* Move to pll config to probe.
* Update SoC name in device tree binding and
also update the Kconfig.

Add support for the display clock controller found on SDM845
based devices. This would allow display drivers to probe and
control their clocks.

The Display clock driver depends on the frequency table macro
movement to a common file [1].


Taniya Das (2):
dt-bindings: clock: Introduce QCOM Display clock bindings
clk: qcom: Add display clock controller driver for SDM845

.../devicetree/bindings/clock/qcom,dispcc.txt | 19 +
drivers/clk/qcom/Kconfig | 10 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/dispcc-sdm845.c | 674 +++++++++++++++++++++
include/dt-bindings/clock/qcom,dispcc-sdm845.h | 45 ++
5 files changed, 749 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/qcom,dispcc.txt
create mode 100644 drivers/clk/qcom/dispcc-sdm845.c
create mode 100644 include/dt-bindings/clock/qcom,dispcc-sdm845.h

Qualcomm INDIA, on behalf of Qualcomm Innovation Center, a member
of the Code Aurora Forum, hosted by the Linux Foundation.

 \ /
  Last update: 2018-06-13 12:33    [W:0.075 / U:0.568 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site