lkml.org 
[lkml]   [2018]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/5] ARM: dts: cygnus: Fix I2C controller interrupt type
Date
Fix I2C controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom
Cygnus SoC

Fixes: b51c05a331ff ("ARM: dts: add I2C device nodes for Broadcom Cygnus")
Fixes: 0f0b21a83ad2 ("ARM: dts: Move all Cygnus peripherals into axi bus")
Fixes: 9c5101f7a253 ("ARM: dts: Reorder Cygnus peripherals")

Signed-off-by: Ray Jui <ray.jui@broadcom.com>
---
arch/arm/boot/dts/bcm-cygnus.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 9fe4f5a..835a6f7 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -216,7 +216,7 @@
reg = <0x18008000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <100000>;
status = "disabled";
};
@@ -245,7 +245,7 @@
reg = <0x1800b000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <100000>;
status = "disabled";
};
--
2.1.4
\
 
 \ /
  Last update: 2018-06-12 22:23    [W:0.128 / U:1.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site