lkml.org 
[lkml]   [2018]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v5 1/7] clk: msm8996-gcc: Mark halt check as no-op for USB/PCIE pipe_clk
Date
Quoting Manu Gautam (2018-05-02 14:06:08)
> The USB and PCIE pipe clocks are sourced from external clocks
> inside the QMP USB/PCIE PHYs. Enabling or disabling of PIPE RCG
> clocks is dependent on PHY initialization sequence hence
> update halt_check to BRANCH_HALT_SKIP for these clocks so
> that clock status bit is not polled when enabling or disabling
> the clocks. It allows to simplify PHY client driver code which
> is both user and source of the pipe_clk and avoid error logging
> related status check on clk_disable/enable.
>
> Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
> ---

Applied to clk-next

\
 
 \ /
  Last update: 2018-06-01 20:47    [W:0.185 / U:0.760 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site