lkml.org 
[lkml]   [2018]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC PATCH 2/5] remoteproc: q6v5: Extract common resource handling
From
Date
Hi Bjorn,
Thanks for this much needed consolidation.

On 5/23/2018 10:50 AM, Bjorn Andersson wrote:
> Shared between all Hexagon V5 based remoteprocs is the handling of the 5
> interrupts and the SMP2P stop request, so break this out into a separate
> function in order to allow these drivers to be cleaned up.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
> drivers/remoteproc/Kconfig | 5 +
> drivers/remoteproc/Makefile | 1 +
> drivers/remoteproc/qcom_q6v5.c | 243 +++++++++++++++++++++++++++++++++
> drivers/remoteproc/qcom_q6v5.h | 46 +++++++
> 4 files changed, 295 insertions(+)
> create mode 100644 drivers/remoteproc/qcom_q6v5.c
> create mode 100644 drivers/remoteproc/qcom_q6v5.h
>
> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
> index cd1c168fd188..63b79ea91a21 100644
> --- a/drivers/remoteproc/Kconfig
> +++ b/drivers/remoteproc/Kconfig
> @@ -102,6 +102,11 @@ config QCOM_ADSP_PIL
> config QCOM_RPROC_COMMON
> tristate
>
> +config QCOM_Q6V5_COMMON
> + tristate
> + depends on ARCH_QCOM
> + depends on QCOM_SMEM
> +
> config QCOM_Q6V5_PIL
> tristate "Qualcomm Hexagon V5 Peripherial Image Loader"
> depends on OF && ARCH_QCOM
> diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
> index 02627ede8d4a..5dd0249cf76a 100644
> --- a/drivers/remoteproc/Makefile
> +++ b/drivers/remoteproc/Makefile
> @@ -16,6 +16,7 @@ obj-$(CONFIG_DA8XX_REMOTEPROC) += da8xx_remoteproc.o
> obj-$(CONFIG_KEYSTONE_REMOTEPROC) += keystone_remoteproc.o
> obj-$(CONFIG_QCOM_ADSP_PIL) += qcom_adsp_pil.o
> obj-$(CONFIG_QCOM_RPROC_COMMON) += qcom_common.o
> +obj-$(CONFIG_QCOM_Q6V5_COMMON) += qcom_q6v5.o
> obj-$(CONFIG_QCOM_Q6V5_PIL) += qcom_q6v5_pil.o
> obj-$(CONFIG_QCOM_SYSMON) += qcom_sysmon.o
> obj-$(CONFIG_QCOM_WCNSS_PIL) += qcom_wcnss_pil.o
> diff --git a/drivers/remoteproc/qcom_q6v5.c b/drivers/remoteproc/qcom_q6v5.c
> new file mode 100644
> index 000000000000..9076537a1671
> --- /dev/null
> +++ b/drivers/remoteproc/qcom_q6v5.c
> @@ -0,0 +1,243 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Qualcomm Peripheral Image Loader for Q6V5 WCSS
> + *

Probably just Q6V5, QCSS not needed.

> + * Copyright (C) 2016-2018 Linaro Ltd.
> + * Copyright (C) 2014 Sony Mobile Communications AB
> + * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
> + */
> +#include <linux/kernel.h>
> +#include <linux/platform_device.h>
> +#include <linux/interrupt.h>
> +#include <linux/soc/qcom/smem.h>
> +#include <linux/soc/qcom/smem_state.h>
> +#include <linux/remoteproc.h>
> +#include "qcom_q6v5.h"
> +
> +/**
> + * qcom_q6v5_prepare() - reinitialize the qcom_q6v5 context before start
> + * @q6v5: reference to qcom_q6v5 context to be reinitialized
> + *
> + * Return: 0 on success, negative errno on failure
> + */
> +int qcom_q6v5_prepare(struct qcom_q6v5 *q6v5)
> +{
> + reinit_completion(&q6v5->start_done);
> + reinit_completion(&q6v5->stop_done);
> +
> + q6v5->running = true;
> + q6v5->handover_issued = false;
> +
> + enable_irq(q6v5->handover_irq);
> +
> + return 0;
> +}
> +
> +/**
> + * qcom_q6v5_unprepare() - unprepare the qcom_q6v5 context after stop
> + * @q6v5: reference to qcom_q6v5 context to be unprepared
> + *
> + * Return: 0 on success, 1 if handover hasn't yet been called
> + */
> +int qcom_q6v5_unprepare(struct qcom_q6v5 *q6v5)
> +{
> + disable_irq(q6v5->handover_irq);
> +
> + return !q6v5->handover_issued;
> +}
> +
> +static irqreturn_t q6v5_wdog_interrupt(int irq, void *data)
> +{
> + struct qcom_q6v5 *q6v5 = data;
> + size_t len;
> + char *msg;
> +
> + /* Sometimes the stop triggers a watchdog rather than a stop-ack */
> + if (!q6v5->running) {
> + complete(&q6v5->stop_done);
> + return IRQ_HANDLED;
> + }
> +

Does this change the behavior for adsp pil, which was unconditionally
doing a rproc_report_crash before, but now checks for the running flag
or probably this is the correct sequence ?

> + msg = qcom_smem_get(QCOM_SMEM_HOST_ANY, q6v5->crash_reason, &len);
> + if (!IS_ERR(msg) && len > 0 && msg[0])
> + dev_err(q6v5->dev, "watchdog received: %s\n", msg);
> + else
> + dev_err(q6v5->dev, "watchdog without message\n");
> +
> + rproc_report_crash(q6v5->rproc, RPROC_FATAL_ERROR);
> +

Should be rproc_report_crash(q6v5->rproc, RPROC_WATCHDOG);

> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t q6v5_fatal_interrupt(int irq, void *data)
> +{
> + struct qcom_q6v5 *q6v5 = data;
> + size_t len;
> + char *msg;
> +
> + msg = qcom_smem_get(QCOM_SMEM_HOST_ANY, q6v5->crash_reason, &len);
> + if (!IS_ERR(msg) && len > 0 && msg[0])
> + dev_err(q6v5->dev, "fatal error received: %s\n", msg);
> + else
> + dev_err(q6v5->dev, "fatal error without message\n");
> +
> + rproc_report_crash(q6v5->rproc, RPROC_FATAL_ERROR);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t q6v5_ready_interrupt(int irq, void *data)
> +{
> + struct qcom_q6v5 *q6v5 = data;
> +
> + complete(&q6v5->start_done);
> +
> + return IRQ_HANDLED;
> +}

For adsp, previously start_done completion was done as a part of
handover interrupt, now its done in ready. Does it mean that the
entries in DT should be changed etc ?
> +
> +/**
> + * qcom_q6v5_wait_for_start() - wait for remote processor start signal
> + * @q6v5: reference to qcom_q6v5 context
> + * @timeout: timeout to wait for the event, in jiffies
> + *
> + * qcom_q6v5_unprepare() should not be called when this function fails.
> + *
> + * Return: 0 on success, -ETIMEDOUT on timeout
> + */
> +int qcom_q6v5_wait_for_start(struct qcom_q6v5 *q6v5, int timeout)
> +{
> + int ret;
> +
> + ret = wait_for_completion_timeout(&q6v5->start_done, timeout);
> + if (!ret)
> + disable_irq(q6v5->handover_irq);
> +
> + return !ret ? -ETIMEDOUT : 0;
> +}
> +
> +static irqreturn_t q6v5_handover_interrupt(int irq, void *data)
> +{
> + struct qcom_q6v5 *q6v5 = data;
> +
> + if (q6v5->handover)
> + q6v5->handover(q6v5);
> +
> + q6v5->handover_issued = true;
> +
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t q6v5_stop_interrupt(int irq, void *data)
> +{
> + struct qcom_q6v5 *q6v5 = data;
> +
> + complete(&q6v5->stop_done);
> +
> + return IRQ_HANDLED;
> +}
> +
> +/**
> + * qcom_q6v5_request_stop() - request the remote processor to stop
> + * @q6v5: reference to qcom_q6v5 context
> + *
> + * Return: 0 on success, negative errno on failure
> + */
> +int qcom_q6v5_request_stop(struct qcom_q6v5 *q6v5)
> +{
> + int ret;
> +
> + q6v5->running = false;
> +
> + qcom_smem_state_update_bits(q6v5->state,
> + BIT(q6v5->stop_bit), BIT(q6v5->stop_bit));
> +
> + ret = wait_for_completion_timeout(&q6v5->stop_done, 5 * HZ);
> +
> + qcom_smem_state_update_bits(q6v5->state, BIT(q6v5->stop_bit), 0);
> +
> + return ret == 0 ? -ETIMEDOUT : 0;
> +}
> +
> +/**
> + * qcom_q6v5_init() - initializer of the q6v5 common struct
> + * @q6v5: handle to be initialized
> + * @pdev: platform_device reference for acquiring resources
> + * @rproc: associated remoteproc instance
> + * @crash_reason: SMEM id for crash reason string, or 0 if none
> + * @handover: function to be called when proxy resources should be released
> + *
> + * Return: 0 on success, negative errno on failure
> + */
> +int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
> + struct rproc *rproc, int crash_reason,
> + void (*handover)(struct qcom_q6v5 *q6v5))
> +{
> + int ret;
> +
> + q6v5->rproc = rproc;
> + q6v5->dev = &pdev->dev;
> + q6v5->crash_reason = crash_reason;
> + q6v5->handover = handover;
> +
> + init_completion(&q6v5->start_done);
> + init_completion(&q6v5->stop_done);
> +
> + q6v5->wdog_irq = platform_get_irq_byname(pdev, "wdog");
> + ret = devm_request_threaded_irq(&pdev->dev, q6v5->wdog_irq,
> + NULL, q6v5_wdog_interrupt,
> + IRQF_TRIGGER_RISING | IRQF_ONESHOT,
> + "q6v5 wdog", q6v5);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to acquire wdog IRQ\n");
> + return ret;
> + }
> +
> + q6v5->fatal_irq = platform_get_irq_byname(pdev, "fatal");
> + ret = devm_request_threaded_irq(&pdev->dev, q6v5->fatal_irq,
> + NULL, q6v5_fatal_interrupt,
> + IRQF_TRIGGER_RISING | IRQF_ONESHOT,
> + "q6v5 fatal", q6v5);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to acquire fatal IRQ\n");
> + return ret;
> + }
> +
> + q6v5->ready_irq = platform_get_irq_byname(pdev, "ready");
> + ret = devm_request_threaded_irq(&pdev->dev, q6v5->ready_irq,
> + NULL, q6v5_ready_interrupt,
> + IRQF_TRIGGER_RISING | IRQF_ONESHOT,
> + "q6v5 ready", q6v5);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to acquire ready IRQ\n");
> + return ret;
> + }
> +
> + q6v5->handover_irq = platform_get_irq_byname(pdev, "handover");
> + ret = devm_request_threaded_irq(&pdev->dev, q6v5->handover_irq,
> + NULL, q6v5_handover_interrupt,
> + IRQF_TRIGGER_RISING | IRQF_ONESHOT,
> + "q6v5 handover", q6v5);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to acquire handover IRQ\n");
> + return ret;
> + }
> + disable_irq(q6v5->handover_irq);
> +
> + q6v5->stop_irq = platform_get_irq_byname(pdev, "stop-ack");
> + ret = devm_request_threaded_irq(&pdev->dev, q6v5->stop_irq,
> + NULL, q6v5_stop_interrupt,
> + IRQF_TRIGGER_RISING | IRQF_ONESHOT,
> + "q6v5 stop", q6v5);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to acquire stop-ack IRQ\n");
> + return ret;
> + }
> +
> + q6v5->state = qcom_smem_state_get(&pdev->dev, "stop", &q6v5->stop_bit);
> + if (IS_ERR(q6v5->state)) {
> + dev_err(&pdev->dev, "failed to acquire stop state\n");
> + return PTR_ERR(q6v5->state);
> + }
> +
> + return 0;
> +}
> diff --git a/drivers/remoteproc/qcom_q6v5.h b/drivers/remoteproc/qcom_q6v5.h
> new file mode 100644
> index 000000000000..7ac92c1e0f49
> --- /dev/null
> +++ b/drivers/remoteproc/qcom_q6v5.h
> @@ -0,0 +1,46 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +
> +#ifndef __QCOM_Q6V5_H__
> +#define __QCOM_Q6V5_H__
> +
> +#include <linux/kernel.h>
> +#include <linux/completion.h>
> +
> +struct rproc;
> +struct qcom_smem_state;
> +
> +struct qcom_q6v5 {
> + struct device *dev;
> + struct rproc *rproc;
> +
> + struct qcom_smem_state *state;
> + unsigned stop_bit;
> +
> + int wdog_irq;
> + int fatal_irq;
> + int ready_irq;
> + int handover_irq;
> + int stop_irq;
> +
> + bool handover_issued;
> +
> + struct completion start_done;
> + struct completion stop_done;
> +
> + int crash_reason;
> +
> + bool running;
> +
> + void (*handover)(struct qcom_q6v5 *q6v5);
> +};
> +
> +int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
> + struct rproc *rproc, int crash_reason,
> + void (*handover)(struct qcom_q6v5 *q6v5));
> +
> +int qcom_q6v5_prepare(struct qcom_q6v5 *q6v5);
> +int qcom_q6v5_unprepare(struct qcom_q6v5 *q6v5);
> +int qcom_q6v5_request_stop(struct qcom_q6v5 *q6v5);
> +int qcom_q6v5_wait_for_start(struct qcom_q6v5 *q6v5, int timeout);
> +
> +#endif
>

Regards,
Sricharan

--
"QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

\
 
 \ /
  Last update: 2018-06-01 08:17    [W:0.180 / U:0.936 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site