lkml.org 
[lkml]   [2018]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 2/7] PCI: dwc: Add MSI-X callbacks handler
From
Date
On 31/05/2018 11:49, Kishon Vijay Abraham I wrote:
> Hi,
>
> On Thursday 17 May 2018 10:39 PM, Gustavo Pimentel wrote:
>> Change pcie_raise_irq() signature, namely the interrupt_num variable type
>> from u8 to u16 to accommodate 2048 maximum MSI-X interrupts.
>>
>> Add PCIe config space capability search function.
>>
>> Add sysfs set/get interface to allow the change of EP MSI-X maximum number.
>>
>> Add EP MSI-X callback for triggering interruptions.
>>
>> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
>> ---
>> Change v1->v2:
>> - Nothing changed, just to follow the patch set version.
>>
>> drivers/pci/dwc/pci-dra7xx.c | 2 +-
>> drivers/pci/dwc/pcie-artpec6.c | 2 +-
>> drivers/pci/dwc/pcie-designware-ep.c | 146 ++++++++++++++++++++++++++++++++-
>> drivers/pci/dwc/pcie-designware-plat.c | 4 +-
>> drivers/pci/dwc/pcie-designware.h | 14 +++-
>> 5 files changed, 163 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
>> index f688204..bdf948b 100644
>> --- a/drivers/pci/dwc/pci-dra7xx.c
>> +++ b/drivers/pci/dwc/pci-dra7xx.c
>> @@ -370,7 +370,7 @@ static void dra7xx_pcie_raise_msi_irq(struct dra7xx_pcie *dra7xx,
>> }
>>
>> static int dra7xx_pcie_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
>> - enum pci_epc_irq_type type, u8 interrupt_num)
>> + enum pci_epc_irq_type type, u16 interrupt_num)
>> {
>> struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
>> struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pci);
>> diff --git a/drivers/pci/dwc/pcie-artpec6.c b/drivers/pci/dwc/pcie-artpec6.c
>> index 321b56c..9a2474b 100644
>> --- a/drivers/pci/dwc/pcie-artpec6.c
>> +++ b/drivers/pci/dwc/pcie-artpec6.c
>> @@ -428,7 +428,7 @@ static void artpec6_pcie_ep_init(struct dw_pcie_ep *ep)
>> }
>>
>> static int artpec6_pcie_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
>> - enum pci_epc_irq_type type, u8 interrupt_num)
>> + enum pci_epc_irq_type type, u16 interrupt_num)
>> {
>> struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
>
> I think you should change pci_epc_raise_irq (in previous patch) and the above
> two changes in a separate patch. You can also include pcie-cadence-ep.c along
> with that.

Ok.

>>
>> diff --git a/drivers/pci/dwc/pcie-designware-ep.c b/drivers/pci/dwc/pcie-designware-ep.c
>> index 1eec441..e5f2377 100644
>> --- a/drivers/pci/dwc/pcie-designware-ep.c
>> +++ b/drivers/pci/dwc/pcie-designware-ep.c
>> @@ -40,6 +40,39 @@ void dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar)
>> __dw_pcie_ep_reset_bar(pci, bar, 0);
>> }
>>
>> +u8 __dw_pcie_ep_find_next_cap(struct dw_pcie *pci, u8 cap_ptr,
>> + u8 cap)
>> +{
>> + u8 cap_id, next_cap_ptr;
>> + u16 reg;
>> +
>> + reg = dw_pcie_readw_dbi(pci, cap_ptr);
>> + next_cap_ptr = (reg & 0xff00) >> 8;
>> + cap_id = (reg & 0x00ff);
>> +
>> + if (!next_cap_ptr || cap_id > PCI_CAP_ID_MAX)
>> + return 0;
>> +
>> + if (cap_id == cap)
>> + return cap_ptr;
>> +
>> + return __dw_pcie_ep_find_next_cap(pci, next_cap_ptr, cap);
>> +}
>> +
>> +u8 dw_pcie_ep_find_capability(struct dw_pcie *pci, u8 cap)
>> +{
>> + u8 next_cap_ptr;
>> + u16 reg;
>> +
>> + reg = dw_pcie_readw_dbi(pci, PCI_CAPABILITY_LIST);
>> + next_cap_ptr = (reg & 0x00ff);
>> +
>> + if (!next_cap_ptr)
>> + return 0;
>> +
>> + return __dw_pcie_ep_find_next_cap(pci, next_cap_ptr, cap);
>> +}
>> +
>> static int dw_pcie_ep_write_header(struct pci_epc *epc, u8 func_no,
>> struct pci_epf_header *hdr)
>> {
>> @@ -241,8 +274,47 @@ static int dw_pcie_ep_set_msi(struct pci_epc *epc, u8 func_no, u8 encode_int)
>> return 0;
>> }
>>
>> +static int dw_pcie_ep_get_msix(struct pci_epc *epc, u8 func_no)
>> +{
>> + struct dw_pcie_ep *ep = epc_get_drvdata(epc);
>> + struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
>> + u32 val, reg;
>> +
>> + if (!ep->msix_cap)
>> + return 0;
>
> return -EINVAL?

Definitely yes. Well spotted!

>
> or pci_epc_get_msix() will return 1.
>> +
>> + reg = ep->msix_cap + PCI_MSIX_FLAGS;
>> + val = dw_pcie_readw_dbi(pci, reg);
>> + if (!(val & PCI_MSIX_FLAGS_ENABLE))
>> + return -EINVAL;
>> +
>> + val &= PCI_MSIX_FLAGS_QSIZE;
>> +
>> + return val;
>> +}
>> +
>> +static int dw_pcie_ep_set_msix(struct pci_epc *epc, u8 func_no, u16 interrupts)
>> +{
>> + struct dw_pcie_ep *ep = epc_get_drvdata(epc);
>> + struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
>> + u32 val, reg;
>> +
>> + if (!ep->msix_cap)
>> + return 0;
>
> here too return -EINVAL.

A copy & paste bug :)

>> +
>> + reg = ep->msix_cap + PCI_MSIX_FLAGS;
>> + val = dw_pcie_readw_dbi(pci, reg);
>> + val &= ~PCI_MSIX_FLAGS_QSIZE;
>> + val |= interrupts;
>> + dw_pcie_dbi_ro_wr_en(pci);
>> + dw_pcie_writew_dbi(pci, reg, val);
>> + dw_pcie_dbi_ro_wr_dis(pci);
>> +
>> + return 0;
>> +}
>> +
>> static int dw_pcie_ep_raise_irq(struct pci_epc *epc, u8 func_no,
>> - enum pci_epc_irq_type type, u8 interrupt_num)
>> + enum pci_epc_irq_type type, u16 interrupt_num)
>> {
>> struct dw_pcie_ep *ep = epc_get_drvdata(epc);
>>
>> @@ -282,6 +354,8 @@ static const struct pci_epc_ops epc_ops = {
>> .unmap_addr = dw_pcie_ep_unmap_addr,
>> .set_msi = dw_pcie_ep_set_msi,
>> .get_msi = dw_pcie_ep_get_msi,
>> + .set_msix = dw_pcie_ep_set_msix,
>> + .get_msix = dw_pcie_ep_get_msix,
>> .raise_irq = dw_pcie_ep_raise_irq,
>> .start = dw_pcie_ep_start,
>> .stop = dw_pcie_ep_stop,
>> @@ -322,6 +396,64 @@ int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep *ep, u8 func_no,
>> return 0;
>> }
>>
>> +int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no,
>> + u16 interrupt_num)
>> +{
>> + struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
>> + struct pci_epc *epc = ep->epc;
>> + u16 tbl_offset, bir;
>> + u32 bar_addr_upper, bar_addr_lower;
>> + u32 msg_addr_upper, msg_addr_lower;
>> + u32 reg, msg_data, vec_ctrl;
>> + u64 tbl_addr, msg_addr, reg_u64;
>> + void __iomem *msix_tbl;
>> + int ret;
>> +
>> + reg = ep->msix_cap + PCI_MSIX_TABLE;
>> + tbl_offset = dw_pcie_readl_dbi(pci, reg);
>> + bir = (tbl_offset & PCI_MSIX_TABLE_BIR);
>> + tbl_offset &= PCI_MSIX_TABLE_OFFSET;
>> + tbl_offset >>= 3;
>> +
>> + reg = PCI_BASE_ADDRESS_0 + (4 * bir);
>> + bar_addr_lower = dw_pcie_readl_dbi(pci, reg);
>> + reg_u64 = (bar_addr_lower & PCI_BASE_ADDRESS_MEM_TYPE_MASK);
>> + if (reg_u64 == PCI_BASE_ADDRESS_MEM_TYPE_64)
>> + bar_addr_upper = dw_pcie_readl_dbi(pci, reg + 4);
>> + else
>> + bar_addr_upper = 0;
>
> You can skip else if you can use something like below>
> bar_addr_upper = 0
> bar_addr_lower = dw_pcie_readl_dbi(pci, reg);
> reg_u64 = (bar_addr_lower & PCI_BASE_ADDRESS_MEM_TYPE_MASK);
> if (reg_u64 == PCI_BASE_ADDRESS_MEM_TYPE_64)
> bar_addr_upper = dw_pcie_readl_dbi(pci, reg + 4);

Sure.

>> +
>> + tbl_addr = ((u64) bar_addr_upper) << 32 | bar_addr_lower;
>> + tbl_addr += (tbl_offset + ((interrupt_num - 1) * PCI_MSIX_ENTRY_SIZE));
>> + tbl_addr &= PCI_BASE_ADDRESS_MEM_MASK;
>> +
>> + msix_tbl = ioremap_nocache(ep->phys_base + tbl_addr, ep->addr_size);
>
> Why do you want to ioremap the entire address region?

Hum, this was from my initial tests...
I guess, I could limit it to the MSIX entry size (PCI_MSIX_ENTRY_SIZE).

>> + if (!msix_tbl)
>> + return -EINVAL;
>> +
>> + msg_addr_lower = readl(msix_tbl + PCI_MSIX_ENTRY_LOWER_ADDR);
>> + msg_addr_upper = readl(msix_tbl + PCI_MSIX_ENTRY_UPPER_ADDR);
>> + msg_addr = ((u64) msg_addr_upper) << 32 | msg_addr_lower;
>> + msg_data = readl(msix_tbl + PCI_MSIX_ENTRY_DATA);
>> + vec_ctrl = readl(msix_tbl + PCI_MSIX_ENTRY_VECTOR_CTRL);
>> +
>> + if (vec_ctrl & PCI_MSIX_ENTRY_CTRL_MASKBIT)
>> + return -EPERM;
>> +
>> + iounmap(msix_tbl);

I noticed now this bug... The ioumap should be above the if.

>> +
>> + ret = dw_pcie_ep_map_addr(epc, func_no, ep->msix_mem_phys, msg_addr,
>> + epc->mem->page_size);
>> + if (ret)
>> + return ret;
>> +
>> + writel(msg_data, ep->msix_mem);
>> +
>> + dw_pcie_ep_unmap_addr(epc, func_no, ep->msix_mem_phys);
>> +
>> + return 0;
>> +}
>> +
>> void dw_pcie_ep_exit(struct dw_pcie_ep *ep)
>> {
>> struct pci_epc *epc = ep->epc;
>> @@ -329,6 +461,9 @@ void dw_pcie_ep_exit(struct dw_pcie_ep *ep)
>> pci_epc_mem_free_addr(epc, ep->msi_mem_phys, ep->msi_mem,
>> epc->mem->page_size);
>>
>> + pci_epc_mem_free_addr(epc, ep->msix_mem_phys, ep->msix_mem,
>> + epc->mem->page_size);
>> +
>> pci_epc_mem_exit(epc);
>> }
>>
>> @@ -410,6 +545,15 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep)
>> dev_err(dev, "Failed to reserve memory for MSI\n");
>> return -ENOMEM;
>> }
>> + ep->msi_cap = dw_pcie_ep_find_capability(pci, PCI_CAP_ID_MSI);
>
> msi_cap is not used anywhere else.
>
> Thanks
> Kishon
>

\
 
 \ /
  Last update: 2018-06-01 13:07    [W:0.076 / U:2.384 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site