lkml.org 
[lkml]   [2018]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 3/3] tty: implement led triggers
On Tue, May 08, 2018 at 12:05:43PM +0200, Uwe Kleine-König wrote:
> The rx trigger fires when data is pushed to the ldisc by the driver. This
> is a bit later than the actual receiving of data but has the nice benefit
> that it doesn't need adaption for each driver and isn't in the hot path.
>
> Similarly the tx trigger fires when data was copied from userspace and is
> given to the ldisc.
>
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> ---
> arch/arm/boot/dts/imx25-logitech-baby.dts | 192 ++++++++++++++++++++++

Looks like you included more than intended in this patch.

> drivers/tty/Kconfig | 7 +
> drivers/tty/tty_buffer.c | 2 +
> drivers/tty/tty_io.c | 3 +
> drivers/tty/tty_port.c | 32 +++-
> include/linux/tty.h | 22 +++
> 6 files changed, 256 insertions(+), 2 deletions(-)
> create mode 100644 arch/arm/boot/dts/imx25-logitech-baby.dts

Johan

\
 
 \ /
  Last update: 2018-05-08 12:09    [W:0.168 / U:10.832 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site