lkml.org 
[lkml]   [2018]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v7 11/24] ASoC: qdsp6: q6afe: Add support to MI2S ports
From
Date

On 5/1/2018 5:08 AM, Srinivas Kandagatla wrote:
> This patch adds support to 4 MI2S ports on LPASS.
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
> ---
> sound/soc/qcom/qdsp6/q6afe.c | 224 +++++++++++++++++++++++++++++++++++++++++++
> sound/soc/qcom/qdsp6/q6afe.h | 13 +++
> 2 files changed, 237 insertions(+)
>
> diff --git a/sound/soc/qcom/qdsp6/q6afe.c b/sound/soc/qcom/qdsp6/q6afe.c
> index be55b3ab045f..ceb18aaa5af4 100644
> --- a/sound/soc/qcom/qdsp6/q6afe.c
> +++ b/sound/soc/qcom/qdsp6/q6afe.c
> @@ -14,6 +14,10 @@
> #include <linux/spinlock.h>
> #include <linux/delay.h>
> #include <linux/soc/qcom/apr.h>
> +#include <sound/soc.h>
> +#include <sound/soc-dai.h>
> +#include <sound/pcm.h>
<snip>

> union afe_port_config {
> struct afe_param_id_hdmi_multi_chan_audio_cfg hdmi_multi_ch;
> struct afe_param_id_slimbus_cfg slim_cfg;
> + struct afe_param_id_i2s_cfg i2s_cfg;
> } __packed;
>
> struct q6afe_port {
> @@ -210,6 +264,22 @@ static struct afe_port_map port_maps[AFE_PORT_MAX] = {
> SLIMBUS_4_RX, 1, 1},
> [SLIMBUS_5_RX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_5_RX,
> SLIMBUS_5_RX, 1, 1},
> + [QUATERNARY_MI2S_RX] = { AFE_PORT_ID_QUATERNARY_MI2S_RX,
> + QUATERNARY_MI2S_RX, 1, 1},
> + [QUATERNARY_MI2S_TX] = { AFE_PORT_ID_QUATERNARY_MI2S_TX,
> + QUATERNARY_MI2S_TX, 0, 1},
> + [SECONDARY_MI2S_RX] = { AFE_PORT_ID_SECONDARY_MI2S_RX,
> + SECONDARY_MI2S_RX, 1, 1},
> + [SECONDARY_MI2S_TX] = { AFE_PORT_ID_SECONDARY_MI2S_TX,
> + SECONDARY_MI2S_TX, 0, 1},
> + [TERTIARY_MI2S_RX] = { AFE_PORT_ID_TERTIARY_MI2S_RX,
> + TERTIARY_MI2S_RX, 1, 1},
> + [TERTIARY_MI2S_TX] = { AFE_PORT_ID_TERTIARY_MI2S_TX,
> + TERTIARY_MI2S_TX, 0, 1},
> + [PRIMARY_MI2S_RX] = { AFE_PORT_ID_PRIMARY_MI2S_RX,
> + PRIMARY_MI2S_RX, 1, 1},
> + [PRIMARY_MI2S_TX] = { AFE_PORT_ID_PRIMARY_MI2S_TX,
> + PRIMARY_MI2S_RX, 0, 1},
Can these be added after SLIMBUS_6_RX?
Also, for better arrangement, please add the port_maps from
PRIMARY_MI2S_RX to QUATERNARY_MI2S_TX in the same sequence of definition
of AFE ports.
Otherwise LGTM.
Once fixed the above comment add-
Acked-by: Banajit Goswami <bgoswami@codeaurora.org>

--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

\
 
 \ /
  Last update: 2018-05-09 05:22    [W:0.312 / U:1.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site