[lkml]   [2018]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: Userland breakage from "Modify the device name as devfreq(X) for sysfs"
Hi John,

On 2018년 05월 09일 08:17, John Stultz wrote:
> Hey folks,
> I wanted to bring up an issue we've recently tripped over, which was
> caused by 4585fbcb5331f ("PM / devfreq: Modify the device name as
> devfreq(X) for sysfs").
> That patch replaced paths like:
> /sys/class/devfreq/ddr_devfreq/min_freq
> and
> /sys/class/devfreq/e82c0000.mali/min_freq
> With
> /sys/class/devfreq/devfreq(0)/min_freq
> and
> /sys/class/devfreq/devfreq(1)/min_freq
> This broke userspace we have that needs to work on 4.4, 4.9 and 4.14 (and on).

Firstly, I'm sorry to make some problem on userland.

> I wanted to try to ask to understand more about the rational for this
> patch, as it doesn't make much sense to me, particularly as now it is
> less obvious as to which path is for which device - and more
> worrisome it could change depending on initialization order.

Some linux framework used the their own prefix under "/sys/class/"
for device such as input/pwm/hwmon/regulator and so on.
(But, some linux framework used the device name directly without any changes)

I thought that devfreq better to use use the consistent name.
If user wanted to access the specific device with device name,
the user can access the path of '/sys/devices/platform/...'.

[Example on Exynos5433-based TM2 board]
root@localhost:~# ls -al /sys/class/devfreq
total 0
drwxr-xr-x 2 root root 0 Jul 26 04:49 .
drwxr-xr-x 50 root root 0 Jan 1 1970 ..
lrwxrwxrwx 1 root root 0 Jul 26 04:49 devfreq0 -> ../../devices/platform/soc/soc:bus0/devfreq/devfreq0
lrwxrwxrwx 1 root root 0 Jul 26 04:49 devfreq1 -> ../../devices/platform/soc/soc:bus1/devfreq/devfreq1

- User can access the devfreq device with specific device name.
root@localhost:/sys/devices/platform/soc/soc:bus0/devfreq/devfreq0# pwd

root@localhost:/sys/devices/platform/soc/soc:bus0/devfreq/devfreq0# ls
available_frequencies device min_freq subsystem uevent
available_governors governor polling_interval target_freq
cur_freq max_freq power trans_stat

root@localhost:/sys/devices/platform/soc/soc:bus0/devfreq/devfreq0# cat min_freq

But, there is one of my mistake. The /sys/class/devfreq/devfreq(X)
doesn't have the 'name' attribute. So, the user cannot find the required
device. It is my mistake. I'll add the 'name' attribute as following:
- /sys/class/devfreq/devfreqX/name

> Unfortunately, this wasn't noticed very quickly, as the patch has been
> upstream now for some time. But I wanted to better understand why
> this change was made, and see if we might consider reverting it, or
> alternatively consider provide multiple sysfs links (both dev_name and
> devfreq(N)) so that we can preserve compatibility?

Unfortunately, there are no frameworks which provide the both dev_name and
[defined prefix](N) link under /sys/class/. I'm not sure this way.

As you comment, devfreq(number) is not fixed as the initialization order.
After adding the 'name' attribute, the user can find the specific device.

How about using the 'name' attribute to find the device
after adding new 'name' attribute when access device through /sys/class?

Best Regards,
Chanwoo Choi
Samsung Electronics

 \ /
  Last update: 2018-05-09 04:29    [W:0.108 / U:5.788 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site