[lkml]   [2018]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v4 0/3] SY8106A regulator support and enable it on Orange Pi PC
This patchset adds dt-bindings and driver for Silergy SY8106A, and then
utilize it on the Orange Pi PC board, which uses SY8016A as its CPUX
(main ARM CPU cluster in an Allwinner SoC) power supply.

The driver's functionality is restricted now, mainly {en,dis}able function
is not yet implemented, as it cannot be debugged on Orange Pi PC
(disable it will kill Linux).

Ondrej Jirman (3):
dt-bindings: add binding for the SY8106A voltage regulator
regulator: add support for SY8106A regulator
ARM: dts: sun8i: h3: Add SY8106A regulator to Orange Pi PC

.../bindings/regulator/sy8106a-regulator.txt | 23 +++
arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 28 +++
drivers/regulator/Kconfig | 7 +
drivers/regulator/Makefile | 2 +-
drivers/regulator/sy8106a-regulator.c | 168 ++++++++++++++++++
6 files changed, 233 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/regulator/sy8106a-regulator.txt
create mode 100644 drivers/regulator/sy8106a-regulator.c


 \ /
  Last update: 2018-05-07 14:31    [W:0.122 / U:1.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site