[lkml]   [2018]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v3 0/3] usb: dwc3: support for Qualcomm DWC3 glue
Add separate dwc3-qcom glue driver for Qualcomm SOCs having dwc3 core.
It is needed to support peripheral mode.
Patches also add support to invoke PHY runtime PM functions on host
mode bus-suspend.

Changes since v2:
- Addressed Rob's comments for DT binding documentation.

Changes since v1:
- Move dwc3 core register accesses from glue driver to dwc3 core as
per review comment from Felipe.
- Addressed other review comments from Felipe and Rob.
- Some other minor code changes related to redability.
- Add reset_control assert in driver probe to ensure core registers
are reset to POR value in case of any initalization by boot code.

Manu Gautam (3):
dt-bindings: usb: Update documentation for Qualcomm DWC3 driver
usb: dwc3: Add Qualcomm DWC3 glue driver
usb: dwc3: core: Suspend PHYs on runtime suspend in host mode

.../devicetree/bindings/usb/qcom,dwc3.txt | 85 ++-
drivers/usb/dwc3/Kconfig | 12 +
drivers/usb/dwc3/Makefile | 1 +
drivers/usb/dwc3/core.c | 36 +-
drivers/usb/dwc3/dwc3-of-simple.c | 1 -
drivers/usb/dwc3/dwc3-qcom.c | 618 +++++++++++++++++++++
6 files changed, 727 insertions(+), 26 deletions(-)
create mode 100644 drivers/usb/dwc3/dwc3-qcom.c

The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

 \ /
  Last update: 2018-05-04 20:49    [W:0.063 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site