[lkml]   [2018]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH net-next v2 03/13] net: phy: sfp: warn the user when no tx_disable pin is available
On Fri, May 04, 2018 at 10:07:53AM -0700, Florian Fainelli wrote:
> On 05/04/2018 06:56 AM, Antoine Tenart wrote:
> > In case no Tx disable pin is available the SFP modules will always be
> > emitting. This could be an issue when using modules using laser as their
> > light source as we would have no way to disable it when the fiber is
> > removed. This patch adds a warning when registering an SFP cage which do
> > not have its tx_disable pin wired or available.
> Is this something that was done in a possibly earlier revision of a
> given board design and which was finally fixed? Nothing wrong with the
> patch, but this seems like a pretty serious board design mistake, that
> needs to be addressed.

Hi Florian

Zii Devel B is like this. Only the "Signal Detect" pin is wired to a


 \ /
  Last update: 2018-05-04 19:15    [W:0.071 / U:1.588 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site