lkml.org 
[lkml]   [2018]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v2 13/13] arm64: dts: marvell: 8040-db: describe the 10G SFP cages
Date
This patch adds the SFP cages description for the 10G interfaces in the
Marvell Armada 8080 DB board.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
---
arch/arm64/boot/dts/marvell/armada-8040-db.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
index 5689fb23bbab..0a9aeac71614 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -70,6 +70,14 @@
compatible = "usb-nop-xceiv";
vcc-supply = <&cp1_reg_usb3_0_vbus>;
};
+
+ sfp_eth0: sfp-eth0 {
+ compatible = "sff,sfp";
+ };
+
+ sfp_eth1: sfp-eth1 {
+ compatible = "sff,sfp";
+ };
};

&i2c0 {
@@ -177,6 +185,8 @@
&cp0_eth0 {
status = "okay";
phy-mode = "10gbase-kr";
+ managed = "in-band-status";
+ sfp = <&sfp_eth0>;
};

&cp0_eth2 {
@@ -303,6 +313,8 @@
&cp1_eth0 {
status = "okay";
phy-mode = "10gbase-kr";
+ managed = "in-band-status";
+ sfp = <&sfp_eth1>;
};

&cp1_eth1 {
--
2.17.0
\
 
 \ /
  Last update: 2018-05-04 16:02    [W:0.224 / U:3.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site