lkml.org 
[lkml]   [2018]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v2 12/13] arm64: dts: marvell: 7040-db: describe the 10G SFP cage
Date
This patch adds the SFP cage description for the 10G interface in the
Marvell Armada 7040 DB board.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
---
arch/arm64/boot/dts/marvell/armada-7040-db.dts | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
index d6bec058a30a..10a429dcaab7 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
@@ -55,6 +55,10 @@
compatible = "usb-nop-xceiv";
vcc-supply = <&cp0_reg_usb3_1_vbus>;
};
+
+ sfp_eth0: sfp-eth0 {
+ compatible = "sff,sfp";
+ };
};

&i2c0 {
@@ -240,8 +244,10 @@
status = "okay";
/* Network PHY */
phy-mode = "10gbase-kr";
+ managed = "in-band-status";
/* Generic PHY, providing serdes lanes */
phys = <&cp0_comphy2 0>;
+ sfp = <&sfp_eth0>;
};

&cp0_eth1 {
--
2.17.0
\
 
 \ /
  Last update: 2018-05-04 16:01    [W:0.157 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site