lkml.org 
[lkml]   [2018]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 0/4] Restore ULPI USB on Tegra20
From
Date
Hi Dmitry

On Fri, 2018-05-04 at 01:55 +0300, Dmitry Osipenko wrote:
> Hello,
>
> This series of patches fixes ULPI USB on Tegra20. The original
> problem
> was reported by Marcel Ziswiler, he found that "ulpi-link" clock was
> incorrectly set to CDEV2 instead of PLL_P_OUT4. Marcel made a patch
> that changed the "ulpi-link" clock to PLL_P_OUT4 and that fixed issue
> with the USB for the devices that have CDEV2 being enabled by
> bootloader.
> The patch got into the kernel and later Marc Dietrich found that USB
> stopped working on the "paz00" Tegra20 board. After a bit of
> discussion
> was revealed that PLL_P_OUT4 is the parent clock of the CDEV2 and
> clock
> driver was setting CDEV2's parent incorrectly. The parent clock is
> actually
> determined by the pinmuxing config of CDEV2 pingroup. This patchset
> fixes
> the parent of CDEV2 clock by making Tegra's pinctrl driver a clock
> provider,
> providing CDEV1/2 clock muxes (thanks to Peter De Schrijver for the
> suggestion), and then setting these clock muxes as parents for the
> CDEV1/2
> clocks. In the end Marcel's CDEV2->PLL_P_OUT4 change is reverted
> since CDEV2
> (aka MCLK2) is the actual clock source for "ulpi-link".
>
> Changelog:
>
> v2:
> - Added new patch "Add quirk for getting CDEV1/2 clocks",
> assuring
> that clk user won't get CDEV1/2 clocks until parent clk muxes
> are available, i.e. resolves potential issue with CDEV-user
> driver
> vs pinctrl driver probe order.
>
> - Factored out "pinctrl" patch from the patchset as was
> requested by
> Linus Walleij.
>
> - Addressed v1 review comments: fixed swapped DEV1/2 clk div
> bits,
> made DEV1/2 divs read-only, etc minor changes.
>
> Dmitry Osipenko (4):
> clk: tegra20: Add DEV1/DEV2 OSC dividers
> clk: tegra20: Correct parents of CDEV1/2 clocks
> clk: tegra: Add quirk for getting CDEV1/2 clocks
> ARM: dts: tegra20: Revert "Fix ULPI regression on Tegra20"
>
> arch/arm/boot/dts/tegra20.dtsi | 2 +-
> drivers/clk/tegra/clk-tegra20.c | 20 +++++++++++++++----
> drivers/clk/tegra/clk.c | 34
> ++++++++++++++++++++++++++++++++-
> 3 files changed, 50 insertions(+), 6 deletions(-)

Beautiful (;-p).

root@colibri-t20:~# cat /sys/kernel/debug/clk/clk_summary | grep -E
'pll_p_out4|cdev2'
pll_p_out4_div 1 1 0 24000000
0 0
pll_p_out4 2 2 0 24000000
0 0
cdev2_mux 1 1 0 24000000
0 0
cdev2 1 1 0 24000000
0 0

You may add my reviewed and tested bys to the remaining patches as
well.

Thanks!

Cheers

Marcel

\
 
 \ /
  Last update: 2018-05-04 15:35    [W:0.121 / U:2.696 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site