lkml.org 
[lkml]   [2018]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] dt-bindings: leds: Add SC27xx breathing light controller documentation
Date
This patch adds the binding documentation for Spreadtrum SC27xx series
breathing light controller, which supports 3 outputs: red LED, green
LED and blue LED.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
.../devicetree/bindings/leds/leds-sc27xx-bltc.txt | 39 ++++++++++++++++++++
1 file changed, 39 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt

diff --git a/Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt b/Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt
new file mode 100644
index 0000000..d4e267d
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt
@@ -0,0 +1,39 @@
+LEDs connected to Spreadtrum SC27XX PMIC breathing light controller
+
+The SC27xx breathing light controller supports to 3 outputs:
+red LED, green LED and blue LED. Each LED can work at normal
+PWM mode or breath light mode.
+
+Required properties:
+- compatible: should be "sprd,sc27xx-bltc".
+- #address-cells: must be 1.
+- #size-cells: must be 0.
+- reg: specify controller address.
+
+LED sub-node properties:
+- reg: number of LED line (could be from 0 to 2).
+- label: (optional) name of LED.
+
+Examples:
+
+led-controller@200 {
+ compatible = "sprd,sc27xx-bltc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x200>;
+
+ red@0 {
+ label = "red";
+ reg = <0x0>;
+ };
+
+ green@1 {
+ label = "green";
+ reg = <0x1>;
+ };
+
+ blue@2 {
+ label = "blue";
+ reg = <0x2>;
+ };
+};
--
1.7.9.5
\
 
 \ /
  Last update: 2018-05-04 12:11    [W:0.151 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site