lkml.org 
[lkml]   [2018]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/2] dmaengine: sprd: Add Spreadtrum DMA configuration
Add Vinod new email.

On 4 May 2018 at 16:01, Baolin Wang <baolin.wang@linaro.org> wrote:
> From: Eric Long <eric.long@spreadtrum.com>
>
> This patch adds the 'device_config' and 'device_prep_slave_sg' interfaces
> for users to configure DMA, as well as adding one 'struct sprd_dma_config'
> structure to save Spreadtrum DMA configuration for each DMA channel.
>
> Signed-off-by: Eric Long <eric.long@spreadtrum.com>
> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
> ---
> drivers/dma/sprd-dma.c | 215 ++++++++++++++++++++++++++++++++++++++++++
> include/linux/dma/sprd-dma.h | 4 +
> 2 files changed, 219 insertions(+)
>
> diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
> index a7a89fd..d7c7ffa 100644
> --- a/drivers/dma/sprd-dma.c
> +++ b/drivers/dma/sprd-dma.c
> @@ -100,6 +100,8 @@
> #define SPRD_DMA_DES_DATAWIDTH_OFFSET 28
> #define SPRD_DMA_SWT_MODE_OFFSET 26
> #define SPRD_DMA_REQ_MODE_OFFSET 24
> +#define SPRD_DMA_WRAP_SEL_OFFSET 23
> +#define SPRD_DMA_WRAP_EN_OFFSET 22
> #define SPRD_DMA_REQ_MODE_MASK GENMASK(1, 0)
> #define SPRD_DMA_FIX_SEL_OFFSET 21
> #define SPRD_DMA_FIX_EN_OFFSET 20
> @@ -154,6 +156,35 @@ struct sprd_dma_chn_hw {
> u32 des_blk_step;
> };
>
> +/*
> + * struct sprd_dma_config - DMA configuration structure
> + * @cfg: dma slave channel runtime config
> + * @src_addr: the source physical address
> + * @dst_addr: the destination physical address
> + * @block_len: specify one block transfer length
> + * @transcation_len: specify one transcation transfer length
> + * @src_step: source transfer step
> + * @dst_step: destination transfer step
> + * @wrap_ptr: wrap pointer address, once the transfer address reaches the
> + * 'wrap_ptr', the next transfer address will jump to the 'wrap_to' address.
> + * @wrap_to: wrap jump to address
> + * @req_mode: specify the DMA request mode
> + * @int_mode: specify the DMA interrupt type
> + */
> +struct sprd_dma_config {
> + struct dma_slave_config cfg;
> + phys_addr_t src_addr;
> + phys_addr_t dst_addr;
> + u32 block_len;
> + u32 transcation_len;
> + u32 src_step;
> + u32 dst_step;
> + phys_addr_t wrap_ptr;
> + phys_addr_t wrap_to;
> + enum sprd_dma_req_mode req_mode;
> + enum sprd_dma_int_type int_mode;
> +};
> +
> /* dma request description */
> struct sprd_dma_desc {
> struct virt_dma_desc vd;
> @@ -164,6 +195,7 @@ struct sprd_dma_desc {
> struct sprd_dma_chn {
> struct virt_dma_chan vc;
> void __iomem *chn_base;
> + struct sprd_dma_config slave_cfg;
> u32 chn_num;
> u32 dev_id;
> struct sprd_dma_desc *cur_desc;
> @@ -552,6 +584,121 @@ static void sprd_dma_issue_pending(struct dma_chan *chan)
> spin_unlock_irqrestore(&schan->vc.lock, flags);
> }
>
> +static enum sprd_dma_datawidth
> +sprd_dma_get_datawidth(enum dma_slave_buswidth buswidth)
> +{
> + switch (buswidth) {
> + case DMA_SLAVE_BUSWIDTH_1_BYTE:
> + return SPRD_DMA_DATAWIDTH_1_BYTE;
> +
> + case DMA_SLAVE_BUSWIDTH_2_BYTES:
> + return SPRD_DMA_DATAWIDTH_2_BYTES;
> +
> + case DMA_SLAVE_BUSWIDTH_4_BYTES:
> + return SPRD_DMA_DATAWIDTH_4_BYTES;
> +
> + case DMA_SLAVE_BUSWIDTH_8_BYTES:
> + return SPRD_DMA_DATAWIDTH_8_BYTES;
> +
> + default:
> + return SPRD_DMA_DATAWIDTH_4_BYTES;
> + }
> +}
> +
> +static u32 sprd_dma_get_step(enum sprd_dma_datawidth datawidth)
> +{
> + switch (datawidth) {
> + case SPRD_DMA_DATAWIDTH_1_BYTE:
> + return SPRD_DMA_BYTE_STEP;
> +
> + case SPRD_DMA_DATAWIDTH_2_BYTES:
> + return SPRD_DMA_SHORT_STEP;
> +
> + case SPRD_DMA_DATAWIDTH_4_BYTES:
> + return SPRD_DMA_WORD_STEP;
> +
> + case SPRD_DMA_DATAWIDTH_8_BYTES:
> + return SPRD_DMA_DWORD_STEP;
> +
> + default:
> + return SPRD_DMA_DWORD_STEP;
> + }
> +}
> +
> +static int sprd_dma_config(struct dma_chan *chan, struct sprd_dma_desc *sdesc,
> + struct sprd_dma_config *slave_cfg)
> +{
> + struct sprd_dma_dev *sdev = to_sprd_dma_dev(chan);
> + struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
> + struct sprd_dma_chn_hw *hw = &sdesc->chn_hw;
> + u32 fix_mode = 0, fix_en = 0, wrap_en = 0, wrap_mode = 0;
> + u32 src_datawidth, dst_datawidth;
> +
> + if (slave_cfg->cfg.slave_id)
> + schan->dev_id = slave_cfg->cfg.slave_id;
> +
> + hw->cfg = SPRD_DMA_DONOT_WAIT_BDONE << SPRD_DMA_WAIT_BDONE_OFFSET;
> + hw->wrap_ptr = (u32)((slave_cfg->wrap_ptr & SPRD_DMA_LOW_ADDR_MASK) |
> + ((slave_cfg->src_addr >> SPRD_DMA_HIGH_ADDR_OFFSET) &
> + SPRD_DMA_HIGH_ADDR_MASK));
> + hw->wrap_to = (u32)((slave_cfg->wrap_to & SPRD_DMA_LOW_ADDR_MASK) |
> + ((slave_cfg->dst_addr >> SPRD_DMA_HIGH_ADDR_OFFSET) &
> + SPRD_DMA_HIGH_ADDR_MASK));
> +
> + hw->src_addr = (u32)(slave_cfg->src_addr & SPRD_DMA_LOW_ADDR_MASK);
> + hw->des_addr = (u32)(slave_cfg->dst_addr & SPRD_DMA_LOW_ADDR_MASK);
> +
> + if ((slave_cfg->src_step != 0 && slave_cfg->dst_step != 0)
> + || (slave_cfg->src_step | slave_cfg->dst_step) == 0) {
> + fix_en = 0;
> + } else {
> + fix_en = 1;
> + if (slave_cfg->src_step)
> + fix_mode = 1;
> + else
> + fix_mode = 0;
> + }
> +
> + if (slave_cfg->wrap_ptr && slave_cfg->wrap_to) {
> + wrap_en = 1;
> + if (slave_cfg->wrap_to == slave_cfg->src_addr) {
> + wrap_mode = 0;
> + } else if (slave_cfg->wrap_to == slave_cfg->dst_addr) {
> + wrap_mode = 1;
> + } else {
> + dev_err(sdev->dma_dev.dev, "invalid wrap mode\n");
> + return -EINVAL;
> + }
> + }
> +
> + hw->intc = slave_cfg->int_mode | SPRD_DMA_CFG_ERR_INT_EN;
> +
> + src_datawidth = sprd_dma_get_datawidth(slave_cfg->cfg.src_addr_width);
> + dst_datawidth = sprd_dma_get_datawidth(slave_cfg->cfg.dst_addr_width);
> + hw->frg_len = src_datawidth << SPRD_DMA_SRC_DATAWIDTH_OFFSET |
> + dst_datawidth << SPRD_DMA_DES_DATAWIDTH_OFFSET |
> + slave_cfg->req_mode << SPRD_DMA_REQ_MODE_OFFSET |
> + wrap_mode << SPRD_DMA_WRAP_SEL_OFFSET |
> + wrap_en << SPRD_DMA_WRAP_EN_OFFSET |
> + fix_mode << SPRD_DMA_FIX_SEL_OFFSET |
> + fix_en << SPRD_DMA_FIX_EN_OFFSET |
> + (slave_cfg->cfg.src_maxburst & SPRD_DMA_FRG_LEN_MASK);
> +
> + hw->blk_len = slave_cfg->block_len & SPRD_DMA_BLK_LEN_MASK;
> +
> + hw->trsc_len = slave_cfg->transcation_len & SPRD_DMA_TRSC_LEN_MASK;
> +
> + hw->trsf_step = (slave_cfg->dst_step & SPRD_DMA_TRSF_STEP_MASK) <<
> + SPRD_DMA_DEST_TRSF_STEP_OFFSET |
> + (slave_cfg->src_step & SPRD_DMA_TRSF_STEP_MASK) <<
> + SPRD_DMA_SRC_TRSF_STEP_OFFSET;
> +
> + hw->frg_step = 0;
> + hw->src_blk_step = 0;
> + hw->des_blk_step = 0;
> + return 0;
> +}
> +
> static struct dma_async_tx_descriptor *
> sprd_dma_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
> size_t len, unsigned long flags)
> @@ -606,6 +753,72 @@ static void sprd_dma_issue_pending(struct dma_chan *chan)
> return vchan_tx_prep(&schan->vc, &sdesc->vd, flags);
> }
>
> +static struct dma_async_tx_descriptor *
> +sprd_dma_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
> + unsigned int sglen, enum dma_transfer_direction dir,
> + unsigned long flags, void *context)
> +{
> + struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
> + struct sprd_dma_config *slave_cfg = &schan->slave_cfg;
> + struct sprd_dma_desc *sdesc;
> + struct scatterlist *sg;
> + int ret, i;
> +
> + /* TODO: now we only support one sg for each DMA configuration. */
> + if (!is_slave_direction(dir) || sglen > 1)
> + return NULL;
> +
> + sdesc = kzalloc(sizeof(*sdesc), GFP_NOWAIT);
> + if (!sdesc)
> + return NULL;
> +
> + for_each_sg(sgl, sg, sglen, i) {
> + if (dir == DMA_MEM_TO_DEV) {
> + slave_cfg->src_addr = sg_dma_address(sg);
> + slave_cfg->dst_addr = slave_cfg->cfg.dst_addr;
> + slave_cfg->src_step =
> + sprd_dma_get_step(slave_cfg->cfg.src_addr_width);
> + slave_cfg->dst_step = SPRD_DMA_NONE_STEP;
> + } else {
> + slave_cfg->src_addr = slave_cfg->cfg.src_addr;
> + slave_cfg->dst_addr = sg_dma_address(sg);
> + slave_cfg->src_step = SPRD_DMA_NONE_STEP;
> + slave_cfg->dst_step =
> + sprd_dma_get_step(slave_cfg->cfg.dst_addr_width);
> + }
> +
> + slave_cfg->block_len = sg_dma_len(sg);
> + slave_cfg->transcation_len = sg_dma_len(sg);
> + }
> +
> + slave_cfg->req_mode =
> + (flags >> SPRD_DMA_REQ_SHIFT) & SPRD_DMA_REQ_MODE_MASK;
> + slave_cfg->int_mode = flags & SPRD_DMA_INT_MASK;
> +
> + ret = sprd_dma_config(chan, sdesc, slave_cfg);
> + if (ret) {
> + kfree(sdesc);
> + return NULL;
> + }
> +
> + return vchan_tx_prep(&schan->vc, &sdesc->vd, flags);
> +}
> +
> +static int sprd_dma_slave_config(struct dma_chan *chan,
> + struct dma_slave_config *config)
> +{
> + struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
> + struct sprd_dma_config *slave_cfg = &schan->slave_cfg;
> +
> + if (!is_slave_direction(config->direction))
> + return -EINVAL;
> +
> + memset(slave_cfg, 0, sizeof(*slave_cfg));
> + memcpy(&slave_cfg->cfg, config, sizeof(*config));
> +
> + return 0;
> +}
> +
> static int sprd_dma_pause(struct dma_chan *chan)
> {
> struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
> @@ -733,6 +946,8 @@ static int sprd_dma_probe(struct platform_device *pdev)
> sdev->dma_dev.device_tx_status = sprd_dma_tx_status;
> sdev->dma_dev.device_issue_pending = sprd_dma_issue_pending;
> sdev->dma_dev.device_prep_dma_memcpy = sprd_dma_prep_dma_memcpy;
> + sdev->dma_dev.device_prep_slave_sg = sprd_dma_prep_slave_sg;
> + sdev->dma_dev.device_config = sprd_dma_slave_config;
> sdev->dma_dev.device_pause = sprd_dma_pause;
> sdev->dma_dev.device_resume = sprd_dma_resume;
> sdev->dma_dev.device_terminate_all = sprd_dma_terminate_all;
> diff --git a/include/linux/dma/sprd-dma.h b/include/linux/dma/sprd-dma.h
> index c545162..b0115e3 100644
> --- a/include/linux/dma/sprd-dma.h
> +++ b/include/linux/dma/sprd-dma.h
> @@ -3,6 +3,10 @@
> #ifndef _SPRD_DMA_H_
> #define _SPRD_DMA_H_
>
> +#define SPRD_DMA_REQ_SHIFT 16
> +#define SPRD_DMA_FLAGS(req_mode, int_type) \
> + ((req_mode) << SPRD_DMA_REQ_SHIFT | (int_type))
> +
> /*
> * enum sprd_dma_req_mode: define the DMA request mode
> * @SPRD_DMA_FRAG_REQ: fragment request mode
> --
> 1.7.9.5
>



--
Baolin.wang
Best Regards

\
 
 \ /
  Last update: 2018-05-04 10:07    [W:0.097 / U:3.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site