lkml.org 
[lkml]   [2018]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] dmaengine: sprd: Add Spreadtrum DMA configuration
Date
From: Eric Long <eric.long@spreadtrum.com>

This patch adds the 'device_config' and 'device_prep_slave_sg' interfaces
for users to configure DMA, as well as adding one 'struct sprd_dma_config'
structure to save Spreadtrum DMA configuration for each DMA channel.

Signed-off-by: Eric Long <eric.long@spreadtrum.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
drivers/dma/sprd-dma.c | 215 ++++++++++++++++++++++++++++++++++++++++++
include/linux/dma/sprd-dma.h | 4 +
2 files changed, 219 insertions(+)

diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
index a7a89fd..d7c7ffa 100644
--- a/drivers/dma/sprd-dma.c
+++ b/drivers/dma/sprd-dma.c
@@ -100,6 +100,8 @@
#define SPRD_DMA_DES_DATAWIDTH_OFFSET 28
#define SPRD_DMA_SWT_MODE_OFFSET 26
#define SPRD_DMA_REQ_MODE_OFFSET 24
+#define SPRD_DMA_WRAP_SEL_OFFSET 23
+#define SPRD_DMA_WRAP_EN_OFFSET 22
#define SPRD_DMA_REQ_MODE_MASK GENMASK(1, 0)
#define SPRD_DMA_FIX_SEL_OFFSET 21
#define SPRD_DMA_FIX_EN_OFFSET 20
@@ -154,6 +156,35 @@ struct sprd_dma_chn_hw {
u32 des_blk_step;
};

+/*
+ * struct sprd_dma_config - DMA configuration structure
+ * @cfg: dma slave channel runtime config
+ * @src_addr: the source physical address
+ * @dst_addr: the destination physical address
+ * @block_len: specify one block transfer length
+ * @transcation_len: specify one transcation transfer length
+ * @src_step: source transfer step
+ * @dst_step: destination transfer step
+ * @wrap_ptr: wrap pointer address, once the transfer address reaches the
+ * 'wrap_ptr', the next transfer address will jump to the 'wrap_to' address.
+ * @wrap_to: wrap jump to address
+ * @req_mode: specify the DMA request mode
+ * @int_mode: specify the DMA interrupt type
+ */
+struct sprd_dma_config {
+ struct dma_slave_config cfg;
+ phys_addr_t src_addr;
+ phys_addr_t dst_addr;
+ u32 block_len;
+ u32 transcation_len;
+ u32 src_step;
+ u32 dst_step;
+ phys_addr_t wrap_ptr;
+ phys_addr_t wrap_to;
+ enum sprd_dma_req_mode req_mode;
+ enum sprd_dma_int_type int_mode;
+};
+
/* dma request description */
struct sprd_dma_desc {
struct virt_dma_desc vd;
@@ -164,6 +195,7 @@ struct sprd_dma_desc {
struct sprd_dma_chn {
struct virt_dma_chan vc;
void __iomem *chn_base;
+ struct sprd_dma_config slave_cfg;
u32 chn_num;
u32 dev_id;
struct sprd_dma_desc *cur_desc;
@@ -552,6 +584,121 @@ static void sprd_dma_issue_pending(struct dma_chan *chan)
spin_unlock_irqrestore(&schan->vc.lock, flags);
}

+static enum sprd_dma_datawidth
+sprd_dma_get_datawidth(enum dma_slave_buswidth buswidth)
+{
+ switch (buswidth) {
+ case DMA_SLAVE_BUSWIDTH_1_BYTE:
+ return SPRD_DMA_DATAWIDTH_1_BYTE;
+
+ case DMA_SLAVE_BUSWIDTH_2_BYTES:
+ return SPRD_DMA_DATAWIDTH_2_BYTES;
+
+ case DMA_SLAVE_BUSWIDTH_4_BYTES:
+ return SPRD_DMA_DATAWIDTH_4_BYTES;
+
+ case DMA_SLAVE_BUSWIDTH_8_BYTES:
+ return SPRD_DMA_DATAWIDTH_8_BYTES;
+
+ default:
+ return SPRD_DMA_DATAWIDTH_4_BYTES;
+ }
+}
+
+static u32 sprd_dma_get_step(enum sprd_dma_datawidth datawidth)
+{
+ switch (datawidth) {
+ case SPRD_DMA_DATAWIDTH_1_BYTE:
+ return SPRD_DMA_BYTE_STEP;
+
+ case SPRD_DMA_DATAWIDTH_2_BYTES:
+ return SPRD_DMA_SHORT_STEP;
+
+ case SPRD_DMA_DATAWIDTH_4_BYTES:
+ return SPRD_DMA_WORD_STEP;
+
+ case SPRD_DMA_DATAWIDTH_8_BYTES:
+ return SPRD_DMA_DWORD_STEP;
+
+ default:
+ return SPRD_DMA_DWORD_STEP;
+ }
+}
+
+static int sprd_dma_config(struct dma_chan *chan, struct sprd_dma_desc *sdesc,
+ struct sprd_dma_config *slave_cfg)
+{
+ struct sprd_dma_dev *sdev = to_sprd_dma_dev(chan);
+ struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
+ struct sprd_dma_chn_hw *hw = &sdesc->chn_hw;
+ u32 fix_mode = 0, fix_en = 0, wrap_en = 0, wrap_mode = 0;
+ u32 src_datawidth, dst_datawidth;
+
+ if (slave_cfg->cfg.slave_id)
+ schan->dev_id = slave_cfg->cfg.slave_id;
+
+ hw->cfg = SPRD_DMA_DONOT_WAIT_BDONE << SPRD_DMA_WAIT_BDONE_OFFSET;
+ hw->wrap_ptr = (u32)((slave_cfg->wrap_ptr & SPRD_DMA_LOW_ADDR_MASK) |
+ ((slave_cfg->src_addr >> SPRD_DMA_HIGH_ADDR_OFFSET) &
+ SPRD_DMA_HIGH_ADDR_MASK));
+ hw->wrap_to = (u32)((slave_cfg->wrap_to & SPRD_DMA_LOW_ADDR_MASK) |
+ ((slave_cfg->dst_addr >> SPRD_DMA_HIGH_ADDR_OFFSET) &
+ SPRD_DMA_HIGH_ADDR_MASK));
+
+ hw->src_addr = (u32)(slave_cfg->src_addr & SPRD_DMA_LOW_ADDR_MASK);
+ hw->des_addr = (u32)(slave_cfg->dst_addr & SPRD_DMA_LOW_ADDR_MASK);
+
+ if ((slave_cfg->src_step != 0 && slave_cfg->dst_step != 0)
+ || (slave_cfg->src_step | slave_cfg->dst_step) == 0) {
+ fix_en = 0;
+ } else {
+ fix_en = 1;
+ if (slave_cfg->src_step)
+ fix_mode = 1;
+ else
+ fix_mode = 0;
+ }
+
+ if (slave_cfg->wrap_ptr && slave_cfg->wrap_to) {
+ wrap_en = 1;
+ if (slave_cfg->wrap_to == slave_cfg->src_addr) {
+ wrap_mode = 0;
+ } else if (slave_cfg->wrap_to == slave_cfg->dst_addr) {
+ wrap_mode = 1;
+ } else {
+ dev_err(sdev->dma_dev.dev, "invalid wrap mode\n");
+ return -EINVAL;
+ }
+ }
+
+ hw->intc = slave_cfg->int_mode | SPRD_DMA_CFG_ERR_INT_EN;
+
+ src_datawidth = sprd_dma_get_datawidth(slave_cfg->cfg.src_addr_width);
+ dst_datawidth = sprd_dma_get_datawidth(slave_cfg->cfg.dst_addr_width);
+ hw->frg_len = src_datawidth << SPRD_DMA_SRC_DATAWIDTH_OFFSET |
+ dst_datawidth << SPRD_DMA_DES_DATAWIDTH_OFFSET |
+ slave_cfg->req_mode << SPRD_DMA_REQ_MODE_OFFSET |
+ wrap_mode << SPRD_DMA_WRAP_SEL_OFFSET |
+ wrap_en << SPRD_DMA_WRAP_EN_OFFSET |
+ fix_mode << SPRD_DMA_FIX_SEL_OFFSET |
+ fix_en << SPRD_DMA_FIX_EN_OFFSET |
+ (slave_cfg->cfg.src_maxburst & SPRD_DMA_FRG_LEN_MASK);
+
+ hw->blk_len = slave_cfg->block_len & SPRD_DMA_BLK_LEN_MASK;
+
+ hw->trsc_len = slave_cfg->transcation_len & SPRD_DMA_TRSC_LEN_MASK;
+
+ hw->trsf_step = (slave_cfg->dst_step & SPRD_DMA_TRSF_STEP_MASK) <<
+ SPRD_DMA_DEST_TRSF_STEP_OFFSET |
+ (slave_cfg->src_step & SPRD_DMA_TRSF_STEP_MASK) <<
+ SPRD_DMA_SRC_TRSF_STEP_OFFSET;
+
+ hw->frg_step = 0;
+ hw->src_blk_step = 0;
+ hw->des_blk_step = 0;
+ return 0;
+}
+
static struct dma_async_tx_descriptor *
sprd_dma_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
size_t len, unsigned long flags)
@@ -606,6 +753,72 @@ static void sprd_dma_issue_pending(struct dma_chan *chan)
return vchan_tx_prep(&schan->vc, &sdesc->vd, flags);
}

+static struct dma_async_tx_descriptor *
+sprd_dma_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
+ unsigned int sglen, enum dma_transfer_direction dir,
+ unsigned long flags, void *context)
+{
+ struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
+ struct sprd_dma_config *slave_cfg = &schan->slave_cfg;
+ struct sprd_dma_desc *sdesc;
+ struct scatterlist *sg;
+ int ret, i;
+
+ /* TODO: now we only support one sg for each DMA configuration. */
+ if (!is_slave_direction(dir) || sglen > 1)
+ return NULL;
+
+ sdesc = kzalloc(sizeof(*sdesc), GFP_NOWAIT);
+ if (!sdesc)
+ return NULL;
+
+ for_each_sg(sgl, sg, sglen, i) {
+ if (dir == DMA_MEM_TO_DEV) {
+ slave_cfg->src_addr = sg_dma_address(sg);
+ slave_cfg->dst_addr = slave_cfg->cfg.dst_addr;
+ slave_cfg->src_step =
+ sprd_dma_get_step(slave_cfg->cfg.src_addr_width);
+ slave_cfg->dst_step = SPRD_DMA_NONE_STEP;
+ } else {
+ slave_cfg->src_addr = slave_cfg->cfg.src_addr;
+ slave_cfg->dst_addr = sg_dma_address(sg);
+ slave_cfg->src_step = SPRD_DMA_NONE_STEP;
+ slave_cfg->dst_step =
+ sprd_dma_get_step(slave_cfg->cfg.dst_addr_width);
+ }
+
+ slave_cfg->block_len = sg_dma_len(sg);
+ slave_cfg->transcation_len = sg_dma_len(sg);
+ }
+
+ slave_cfg->req_mode =
+ (flags >> SPRD_DMA_REQ_SHIFT) & SPRD_DMA_REQ_MODE_MASK;
+ slave_cfg->int_mode = flags & SPRD_DMA_INT_MASK;
+
+ ret = sprd_dma_config(chan, sdesc, slave_cfg);
+ if (ret) {
+ kfree(sdesc);
+ return NULL;
+ }
+
+ return vchan_tx_prep(&schan->vc, &sdesc->vd, flags);
+}
+
+static int sprd_dma_slave_config(struct dma_chan *chan,
+ struct dma_slave_config *config)
+{
+ struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
+ struct sprd_dma_config *slave_cfg = &schan->slave_cfg;
+
+ if (!is_slave_direction(config->direction))
+ return -EINVAL;
+
+ memset(slave_cfg, 0, sizeof(*slave_cfg));
+ memcpy(&slave_cfg->cfg, config, sizeof(*config));
+
+ return 0;
+}
+
static int sprd_dma_pause(struct dma_chan *chan)
{
struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
@@ -733,6 +946,8 @@ static int sprd_dma_probe(struct platform_device *pdev)
sdev->dma_dev.device_tx_status = sprd_dma_tx_status;
sdev->dma_dev.device_issue_pending = sprd_dma_issue_pending;
sdev->dma_dev.device_prep_dma_memcpy = sprd_dma_prep_dma_memcpy;
+ sdev->dma_dev.device_prep_slave_sg = sprd_dma_prep_slave_sg;
+ sdev->dma_dev.device_config = sprd_dma_slave_config;
sdev->dma_dev.device_pause = sprd_dma_pause;
sdev->dma_dev.device_resume = sprd_dma_resume;
sdev->dma_dev.device_terminate_all = sprd_dma_terminate_all;
diff --git a/include/linux/dma/sprd-dma.h b/include/linux/dma/sprd-dma.h
index c545162..b0115e3 100644
--- a/include/linux/dma/sprd-dma.h
+++ b/include/linux/dma/sprd-dma.h
@@ -3,6 +3,10 @@
#ifndef _SPRD_DMA_H_
#define _SPRD_DMA_H_

+#define SPRD_DMA_REQ_SHIFT 16
+#define SPRD_DMA_FLAGS(req_mode, int_type) \
+ ((req_mode) << SPRD_DMA_REQ_SHIFT | (int_type))
+
/*
* enum sprd_dma_req_mode: define the DMA request mode
* @SPRD_DMA_FRAG_REQ: fragment request mode
--
1.7.9.5
\
 
 \ /
  Last update: 2018-05-04 10:03    [W:0.072 / U:1.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site