lkml.org 
[lkml]   [2018]   [May]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] mmc: sdhci-msm: Remove NO_CARD_NO_RESET quirk
From
Date
On 30/05/18 17:43, Georgi Djakov wrote:
> Now we have a proper implementation for the power irq handling and this
> quirk is not needed anymore. In fact, it is causing card detection delays
> on apq8096 platforms and the following error is displayed:
> sdhci_msm 74a4900.sdhci: mmc0: pwr_irq for req: (4) timed out
>
> The quirk is forcing the controller to retain 1.8V signalling on the slot
> even when a new card is inserted, which is not correct. The proper behavior
> would be to reset the controller in order to start with 3.3V signaling.
>
> Fixes: c0309b3803fe ("mmc: sdhci-msm: Add sdhci msm register write APIs which wait for pwr irq")
> Suggested-by: Vijay Viswanath <vviswana@codeaurora.org>
> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>

Acked-by: Adrian Hunter <adrian.hunter@intel.com>

> ---
> This can go for v4.18, as it's not a critical fix.
> Tested on db410c and db820c.
> ---
> drivers/mmc/host/sdhci-msm.c | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
> index c283291db705..791779173332 100644
> --- a/drivers/mmc/host/sdhci-msm.c
> +++ b/drivers/mmc/host/sdhci-msm.c
> @@ -1333,7 +1333,6 @@ static const struct sdhci_ops sdhci_msm_ops = {
>
> static const struct sdhci_pltfm_data sdhci_msm_pdata = {
> .quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION |
> - SDHCI_QUIRK_NO_CARD_NO_RESET |
> SDHCI_QUIRK_SINGLE_POWER_WRITE |
> SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
> .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
>

\
 
 \ /
  Last update: 2018-05-31 07:57    [W:0.083 / U:1.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site