lkml.org 
[lkml]   [2018]   [May]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v4 5/6] clk: bd71837: Add driver for BD71837 PMIC clock
Date
Quoting Matti Vaittinen (2018-05-30 01:43:19)
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index 41492e980ef4..4b045699bb5e 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -279,6 +279,15 @@ config COMMON_CLK_STM32H7
> ---help---
> Support for stm32h7 SoC family clocks
>
> +config COMMON_CLK_BD71837
> + tristate "Clock driver for ROHM BD71837 PMIC MFD"
> + depends on MFD_BD71837
> + depends on I2C=y

Why depend on I2C=y?

> + depends on OF

Why depend on OF?

> + help
> + This driver supports ROHM BD71837 PMIC clock.
> +
> +
> source "drivers/clk/bcm/Kconfig"
> source "drivers/clk/hisilicon/Kconfig"
> source "drivers/clk/imgtec/Kconfig"
> diff --git a/drivers/clk/clk-bd71837.c b/drivers/clk/clk-bd71837.c
> new file mode 100644
> index 000000000000..91456d1077ac
> --- /dev/null
> +++ b/drivers/clk/clk-bd71837.c
> @@ -0,0 +1,151 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (C) 2018 ROHM Semiconductors
> +// bd71837.c -- ROHM BD71837MWV clock driver
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/err.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/mfd/bd71837.h>
> +#include <linux/clk-provider.h>
> +#include <linux/clkdev.h>
> +
> +static int bd71837_clk_enable(struct clk_hw *hw);
> +static void bd71837_clk_disable(struct clk_hw *hw);
> +static int bd71837_clk_is_enabled(struct clk_hw *hw);
> +
> +struct bd71837_clk {
> + struct clk_hw hw;
> + uint8_t reg;
> + uint8_t mask;
> + unsigned long rate;
> + struct platform_device *pdev;
> + struct bd71837 *mfd;
> +};
> +
> +static unsigned long bd71837_clk_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate);
> +
> +static const struct clk_ops bd71837_clk_ops = {
> + .recalc_rate = &bd71837_clk_recalc_rate,
> + .prepare = &bd71837_clk_enable,
> + .unprepare = &bd71837_clk_disable,
> + .is_prepared = &bd71837_clk_is_enabled,
> +};

Move this structure after the function definitions. And drop the forward
declared functions.

> +
> +static int bd71837_clk_set(struct clk_hw *hw, int status)
> +{
> + struct bd71837_clk *c = container_of(hw, struct bd71837_clk, hw);
> +
> + return bd71837_update_bits(c->mfd, c->reg, c->mask, status);
> +}
> +
> +static void bd71837_clk_disable(struct clk_hw *hw)
> +{
> + int rv;
> + struct bd71837_clk *c = container_of(hw, struct bd71837_clk, hw);
> +
> + rv = bd71837_clk_set(hw, 0);
> + if (rv)
> + dev_err(&c->pdev->dev, "Failed to disable 32K clk (%d)\n", rv);

Why is a disable error message more important than an enable error
message? Please drop this message and rely on callers to indicate if
enabling their clk didn't work for some reason.

> +}
> +
> +static int bd71837_clk_enable(struct clk_hw *hw)
> +{
> + return bd71837_clk_set(hw, 1);
> +}
> +
> +static int bd71837_clk_is_enabled(struct clk_hw *hw)
> +{
> + struct bd71837_clk *c = container_of(hw, struct bd71837_clk, hw);
> +
> + return c->mask & bd71837_reg_read(c->mfd, c->reg);

Please put this on two or more lines so we know what the type of
bd71837_reg_read() returns:

u32 reg = bd71837_reg_read(....)

return c->mask & reg;


> +}
> +
> +static unsigned long bd71837_clk_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + struct bd71837_clk *c = container_of(hw, struct bd71837_clk, hw);
> +
> + return c->rate;

Recalc rate should read the hardware instead of returning a cached rate
unless it can't actually read hardware.

> +}
> +
> +static int bd71837_clk_probe(struct platform_device *pdev)
> +{
> + struct bd71837_clk *c;
> + int rval = -ENOMEM;
> + struct bd71837 *mfd = dev_get_drvdata(pdev->dev.parent);
> + const char *errstr = "memory allocation for bd71837 data failed";

We don't need allocation error messages.

> + struct clk_init_data init = {
> + .name = "bd71837-32k-out",
> + .ops = &bd71837_clk_ops,
> + };
> +
> + c = kzalloc(sizeof(struct bd71837_clk), GFP_KERNEL);

Use sizeof(*c) instead so we don't have to worry about type mismatches.

> + if (!c)
> + goto err_out;
> +
> + c->reg = BD71837_REG_OUT32K;
> + c->mask = BD71837_OUT32K_EN;
> + c->rate = BD71837_CLK_RATE;

Is the plan to have more clks supported by this driver in the future?
Because right now it seems to make a structure up and then hardcode the
members for a single clk so I'm not sure why those registers aren't just
hardcoded in the clk_ops functions that use them.

> + c->mfd = mfd;
> + c->pdev = pdev;
> +
> + if (pdev->dev.of_node)

If there isn't an of_node it would be NULL, and then calling the
function below would cause it to not update the init name? Seems like it
could be called unconditionally.

> + of_property_read_string_index(pdev->dev.of_node,
> + "clock-output-names", 0,
> + &init.name);
> +
> + c->hw.init = &init;
> +
> + errstr = "failed to register 32K clk";

The 'errstr' thing is not standard. Please just call dev_err() directly
with the string you want to print. And consider not printing anything at
all.

> + rval = clk_hw_register(&pdev->dev, &c->hw);
> + if (rval)
> + goto err_free;
> +
> + errstr = "failed to register clkdev for bd71837";
> + rval = clk_hw_register_clkdev(&c->hw, init.name, NULL);

Are you using the clkdev lookup? Or this is just added for backup
purposes? If this is a mostly DT driver then please drop this part of
the patch and rely on of_clk_hw_add_provider() to handle the lookup
instead.

> + if (rval)
> + goto err_unregister;
> +
> + platform_set_drvdata(pdev, c);
> + dev_dbg(&pdev->dev, "bd71837_clk successfully probed\n");

There's a pr_debug() in really_probe() for this.

> +
> + return 0;
> +
> +err_unregister:
> + clk_hw_unregister(&c->hw);
> +err_free:
> + kfree(c);
> +err_out:
> + dev_err(&pdev->dev, "%s\n", errstr);
> + return rval;
> +}
> +
> +static int bd71837_clk_remove(struct platform_device *pdev)
> +{
> + struct bd71837_clk *c = platform_get_drvdata(pdev);
> +
> + if (c) {
> + clk_hw_unregister(&c->hw);

Use devm to register clks.

> + kfree(c);

and devm_kzalloc()

> + platform_set_drvdata(pdev, NULL);

This doesn't need to be done. Drop it.

> + }
> + return 0;
> +}
> +

\
 
 \ /
  Last update: 2018-05-31 17:11    [W:0.156 / U:1.960 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site