lkml.org 
[lkml]   [2018]   [May]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 5/5] ARM: dts: imx6qdl: add missing compatible and clock properties for EPIT
From
Date
On 05/30/2018 03:03 PM, Clément Péron wrote:
> From: Colin Didier <colin.didier@devialet.com>
>
> Add missing compatible and clock properties for EPIT node.
>
> Signed-off-by: Colin Didier <colin.didier@devialet.com>
> Signed-off-by: Clément Peron <clement.peron@devialet.com>
> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
> ---
> arch/arm/boot/dts/imx6qdl.dtsi | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
> index c003e62bf290..0feec516847a 100644
> --- a/arch/arm/boot/dts/imx6qdl.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl.dtsi
> @@ -844,13 +844,23 @@
> };
>
> epit1: epit@20d0000 { /* EPIT1 */

epit1: timer@20d0000 { ...

And /* EPIT1 */ comment can be removed, it is quite clear from the same
line context.

Formally it is a subject to another patch, but I think this can be
accepted as a part of this one.

> + compatible = "fsl,imx6q-epit", "fsl,imx31-epit";
> reg = <0x020d0000 0x4000>;
> interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX6QDL_CLK_IPG_PER>,
> + <&clks IMX6QDL_CLK_EPIT1>;
> + clock-names = "ipg", "per";
> + status = "disabled";
> };
>
> epit2: epit@20d4000 { /* EPIT2 */

Same as above.

> + compatible = "fsl,imx6q-epit", "fsl,imx31-epit";
> reg = <0x020d4000 0x4000>;
> interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX6QDL_CLK_IPG_PER>,
> + <&clks IMX6QDL_CLK_EPIT2>;
> + clock-names = "ipg", "per";
> + status = "disabled";
> };
>
> src: src@20d8000 {
>

--
With best wishes,
Vladimir

\
 
 \ /
  Last update: 2018-05-31 10:34    [W:0.161 / U:3.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site