lkml.org 
[lkml]   [2018]   [May]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/2] usb: dwc3: of_simple: don't call pm_runtime_set_active()
From
Date

On 30/05/18 15:31, Felipe Balbi wrote:
> Roger Quadros <rogerq@ti.com> writes:
>
>> Don't call pm_runtime_set_active() as it will prevent the device
>> from being activated in the next pm_runtime_get_sync() call.
>>
>> Also call pm_runtime_get_sync() before of_platform_populate().
>>
>> Signed-off-by: Roger Quadros <rogerq@ti.com>
>
> This patch is wrong.
>
>> ---
>> drivers/usb/dwc3/dwc3-of-simple.c | 7 +++----
>> 1 file changed, 3 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c
>> index e98d221..2cbb5c0 100644
>> --- a/drivers/usb/dwc3/dwc3-of-simple.c
>> +++ b/drivers/usb/dwc3/dwc3-of-simple.c
>> @@ -121,6 +121,9 @@ static int dwc3_of_simple_probe(struct platform_device *pdev)
>> if (ret)
>> goto err_resetc_assert;
>>
>> + pm_runtime_enable(dev);
>> + pm_runtime_get_sync(dev);
>
> No, this is the wrong way to do things. My device should be enabled
> already from probe, specially since I have already enabled clocks.

As far as I understood just enabling clocks (which might not include bus clock)
doesn't ensure device is enabled.

Did you mean that I don't need to do a pm_runtime_get_sync() to enable my device in probe?
Who is enabling by device for me then? Is device core supposed to do it?

>
>> ret = of_platform_populate(np, NULL, NULL, dev);
>> if (ret) {
>> for (i = 0; i < simple->num_clocks; i++) {
>> @@ -131,10 +134,6 @@ static int dwc3_of_simple_probe(struct platform_device *pdev)
>> goto err_resetc_assert;
>> }
>>
>> - pm_runtime_set_active(dev);
>> - pm_runtime_enable(dev);
>> - pm_runtime_get_sync(dev);
>
> this hunk is not wrong at all.
>

The issue I was facing is that without this patch my device wasn't being enabled
as pm_runtime_set_active() is being done _before_ pm_runtime_get_sync().
It could be an issue with the platform's PM domain code as well.

Tero/Dave what do you think?

--
cheers,
-roger

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

\
 
 \ /
  Last update: 2018-05-31 09:24    [W:0.074 / U:0.568 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site