lkml.org 
[lkml]   [2018]   [May]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 1/2] ARM: debug: Add Iproc UART3 debug addresses
From
Date
Hi Clément,

Correct me if I'm wrong, but I thought the trend is to move to use
earlycon that can be activated from kernel command line for early print
before the serial driver is loaded.

Have you tried earlcon?

Thanks,

Ray

On 5/30/2018 6:19 AM, Clément Péron wrote:
> From: Clément Peron <clement.peron@devialet.com>
>
> Broadcom Iproc SoCs typically use the UART3 for
> debug/console, provide a known good location for that.
>
> Signed-off-by: Clément Peron <clement.peron@devialet.com>
> ---
>
> arch/arm/Kconfig.debug | 12 +++++++++++-
> 1 file changed, 11 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
> index 199ebc1c4538..4ea9d5793b91 100644
> --- a/arch/arm/Kconfig.debug
> +++ b/arch/arm/Kconfig.debug
> @@ -207,6 +207,14 @@ choice
> depends on ARCH_BCM_HR2
> select DEBUG_UART_8250
>
> + config DEBUG_BCM_IPROC_UART3
> + bool "Kernel low-level debugging on BCM IPROC UART3"
> + depends on ARCH_BCM_CYGNUS
> + select DEBUG_UART_8250
> + help
> + Say Y here if you want the debug print routines to direct
> + their output to the third serial port on these devices.
> +
> config DEBUG_BCM_KONA_UART
> bool "Kernel low-level debugging messages via BCM KONA UART"
> depends on ARCH_BCM_MOBILE
> @@ -1557,6 +1565,7 @@ config DEBUG_UART_PHYS
> default 0x18000400 if DEBUG_BCM_HR2
> default 0x18010000 if DEBUG_SIRFATLAS7_UART0
> default 0x18020000 if DEBUG_SIRFATLAS7_UART1
> + default 0x18023000 if DEBUG_BCM_IPROC_UART3
> default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1
> default 0x20001000 if DEBUG_HIP01_UART
> default 0x20060000 if DEBUG_RK29_UART0
> @@ -1676,6 +1685,7 @@ config DEBUG_UART_VIRT
> default 0xf1002000 if DEBUG_MT8127_UART0
> default 0xf1006000 if DEBUG_MT6589_UART0
> default 0xf1009000 if DEBUG_MT8135_UART3
> + default 0xf1023000 if DEBUG_BCM_IPROC_UART3
> default 0xf11f1000 if DEBUG_VERSATILE
> default 0xf1600000 if DEBUG_INTEGRATOR
> default 0xf1c28000 if DEBUG_SUNXI_UART0
> @@ -1791,7 +1801,7 @@ config DEBUG_UART_8250_WORD
> DEBUG_KEYSTONE_UART0 || DEBUG_KEYSTONE_UART1 || \
> DEBUG_ALPINE_UART0 || \
> DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
> - DEBUG_DAVINCI_DA8XX_UART2 || \
> + DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_BCM_IPROC_UART3 || \
> DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2
>
> config DEBUG_UART_8250_PALMCHIP
>

\
 
 \ /
  Last update: 2018-05-30 19:25    [W:0.080 / U:2.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site