[lkml]   [2018]   [May]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v4 0/6] mfd/regulator/clk: bd71837: ROHM BD71837 PMIC driver
On Wed, May 30, 2018 at 03:56:34PM +0300, Matti Vaittinen wrote:
> On Wed, May 30, 2018 at 12:00:00PM +0100, Mark Brown wrote:

> > The tradeoff with forced PWM mode is that the quality of regulation will
> > be a lot better, especially if the load changes suddenly (as things like
> > CPUs often do). Most hardware that's at all current is able respond to
> > changes in load and switch modes automatically when it's appropriate,
> > except possibly in some very low power modes.

> Yes. The mode switching is automatic. But there is this control bit for
> disabling automatic mode switching and forcing the PWM. Problem with
> these 4 last bucks is just that if regulator is in PFM (and it may be
> if not forced to PWM - due to this automatic switching) then the voltage
> change is not behaving well.

That sounds like the mode switching just isn't very good and needs a bit
of help so forcing the mode is probably going to do the right thing.
[unhandled content-type:application/pgp-signature]
 \ /
  Last update: 2018-05-30 17:42    [W:0.065 / U:1.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site