lkml.org 
[lkml]   [2018]   [May]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: debug: Add Iproc UART3 debug addresses
Date
From: Clément Peron <clement.peron@devialet.com>

Broadcom Iproc SoCs typically use the UART3 for
debug/console, provide a known good location for that.

Signed-off-by: Clément Peron <clement.peron@devialet.com>
---
arch/arm/Kconfig.debug | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 199ebc1c4538..fa6fa1dae94d 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -207,6 +207,14 @@ choice
depends on ARCH_BCM_HR2
select DEBUG_UART_8250

+ config DEBUG_BCM_IPROC_UART3
+ bool "Kernel low-level debugging on BCM IPROC UART3"
+ depends on ARCH_BCM_CYGNUS
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the third serial port on these devices.
+
config DEBUG_BCM_KONA_UART
bool "Kernel low-level debugging messages via BCM KONA UART"
depends on ARCH_BCM_MOBILE
@@ -1564,6 +1572,7 @@ config DEBUG_UART_PHYS
default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
default 0x20201000 if DEBUG_BCM2835
default 0x3f201000 if DEBUG_BCM2836
+ default 0x18023000 if DEBUG_BCM_IPROC_UART3
default 0x3e000000 if DEBUG_BCM_KONA_UART
default 0x4000e400 if DEBUG_LL_UART_EFM32
default 0x40028000 if DEBUG_AT91_SAMV7_USART1
@@ -1730,6 +1739,7 @@ config DEBUG_UART_VIRT
default 0xfe018000 if DEBUG_MMP_UART3
default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART
default 0xfe230000 if DEBUG_PICOXCELL_UART
+ default 0xf1023000 if DEBUG_BCM_IPROC_UART3
default 0xfe300000 if DEBUG_BCM_KONA_UART
default 0xfe800000 if ARCH_IOP32X
default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HIX5HD2_UART
@@ -1791,7 +1801,7 @@ config DEBUG_UART_8250_WORD
DEBUG_KEYSTONE_UART0 || DEBUG_KEYSTONE_UART1 || \
DEBUG_ALPINE_UART0 || \
DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
- DEBUG_DAVINCI_DA8XX_UART2 || \
+ DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_BCM_IPROC_UART3 || \
DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2

config DEBUG_UART_8250_PALMCHIP
--
2.17.0
\
 
 \ /
  Last update: 2018-05-30 14:30    [W:0.055 / U:3.404 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site