lkml.org 
[lkml]   [2018]   [May]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 03/10] drm/exynos: move connector creation to attach callback
Date
The current implementation assumes that the only possible peripheral
device for DSIM is a panel. Using an output bridge should also be
possible.

If an output bridge in available, don't create a new connector.
Instead add bridge to DSIM encdoer in dsi_host_attach().

Signed-off-by: Maciej Purski <m.purski@samsung.com>
---
drivers/gpu/drm/exynos/exynos_drm_dsi.c | 35 +++++++++++++++++++++------------
1 file changed, 22 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index 85eb2262..7b50bad 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -1501,7 +1501,28 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host,
struct mipi_dsi_device *device)
{
struct exynos_dsi *dsi = host_to_dsi(host);
- struct drm_device *drm = dsi->connector.dev;
+ struct drm_encoder *encoder = &dsi->encoder;
+ struct drm_device *drm = encoder->dev;
+ struct drm_bridge *out_bridge;
+
+ out_bridge = of_drm_find_bridge(device->dev.of_node);
+ if (out_bridge) {
+ drm_bridge_attach(encoder, out_bridge, NULL);
+ } else {
+ int ret = exynos_dsi_create_connector(encoder);
+
+ if (ret) {
+ DRM_ERROR("failed to create connector ret = %d\n", ret);
+ drm_encoder_cleanup(encoder);
+ return ret;
+ }
+
+ dsi->panel = of_drm_find_panel(device->dev.of_node);
+ if (dsi->panel) {
+ drm_panel_attach(dsi->panel, &dsi->connector);
+ dsi->connector.status = connector_status_connected;
+ }
+ }

/*
* This is a temporary solution and should be made by more generic way.
@@ -1520,11 +1541,6 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host,
dsi->lanes = device->lanes;
dsi->format = device->format;
dsi->mode_flags = device->mode_flags;
- dsi->panel = of_drm_find_panel(device->dev.of_node);
- if (dsi->panel) {
- drm_panel_attach(dsi->panel, &dsi->connector);
- dsi->connector.status = connector_status_connected;
- }
exynos_drm_crtc_get_by_type(drm, EXYNOS_DISPLAY_TYPE_LCD)->i80_mode =
!(dsi->mode_flags & MIPI_DSI_MODE_VIDEO);

@@ -1653,13 +1669,6 @@ static int exynos_dsi_bind(struct device *dev, struct device *master,
if (ret < 0)
return ret;

- ret = exynos_dsi_create_connector(encoder);
- if (ret) {
- DRM_ERROR("failed to create connector ret = %d\n", ret);
- drm_encoder_cleanup(encoder);
- return ret;
- }
-
if (dsi->mic_bridge_node) {
mic_bridge = of_drm_find_bridge(dsi->mic_bridge_node);
if (mic_bridge)
--
2.7.4
\
 
 \ /
  Last update: 2018-05-30 14:18    [W:0.207 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site