lkml.org 
[lkml]   [2018]   [May]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectApplied "regulator: bd71837: BD71837 PMIC regulator driver" to the regulator tree
Date
The patch

regulator: bd71837: BD71837 PMIC regulator driver

has been applied to the regulator tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From ba08799e90b5935a3df20766a73b5841046f6832 Mon Sep 17 00:00:00 2001
From: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Date: Wed, 30 May 2018 11:43:43 +0300
Subject: [PATCH] regulator: bd71837: BD71837 PMIC regulator driver

Support for controlling the 8 bucks and 7 LDOs the PMIC contains.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/regulator/Kconfig | 11 +
drivers/regulator/Makefile | 1 +
drivers/regulator/bd71837-regulator.c | 640 ++++++++++++++++++++++++++
3 files changed, 652 insertions(+)
create mode 100644 drivers/regulator/bd71837-regulator.c

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 4efae3b7e746..5dbccf5f3037 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -180,6 +180,17 @@ config REGULATOR_BCM590XX
BCM590xx PMUs. This will enable support for the software
controllable LDO/Switching regulators.

+config REGULATOR_BD71837
+ tristate "ROHM BD71837 Power Regulator"
+ depends on MFD_BD71837
+ help
+ This driver supports voltage regulators on ROHM BD71837 PMIC.
+ This will enable support for the software controllable buck
+ and LDO regulators.
+
+ This driver can also be built as a module. If so, the module
+ will be called bd71837-regulator.
+
config REGULATOR_BD9571MWV
tristate "ROHM BD9571MWV Regulators"
depends on MFD_BD9571MWV
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index d81fb02bd6e9..bd818ceb7c72 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o
obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o
obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o
obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o
+obj-$(CONFIG_REGULATOR_BD71837) += bd71837-regulator.o
obj-$(CONFIG_REGULATOR_BD9571MWV) += bd9571mwv-regulator.o
obj-$(CONFIG_REGULATOR_DA903X) += da903x.o
obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o
diff --git a/drivers/regulator/bd71837-regulator.c b/drivers/regulator/bd71837-regulator.c
new file mode 100644
index 000000000000..6eae4d0432a2
--- /dev/null
+++ b/drivers/regulator/bd71837-regulator.c
@@ -0,0 +1,640 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018 ROHM Semiconductors
+// bd71837-regulator.c ROHM BD71837MWV regulator driver
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/mfd/bd71837.h>
+#include <linux/regulator/of_regulator.h>
+
+struct bd71837_pmic {
+ struct regulator_desc descs[BD71837_REGULATOR_CNT];
+ struct bd71837 *mfd;
+ struct platform_device *pdev;
+ struct regulator_dev *rdev[BD71837_REGULATOR_CNT];
+};
+
+/*
+ * BUCK1/2/3/4
+ * BUCK1RAMPRATE[1:0] BUCK1 DVS ramp rate setting
+ * 00: 10.00mV/usec 10mV 1uS
+ * 01: 5.00mV/usec 10mV 2uS
+ * 10: 2.50mV/usec 10mV 4uS
+ * 11: 1.25mV/usec 10mV 8uS
+ */
+static int bd71837_buck1234_set_ramp_delay(struct regulator_dev *rdev,
+ int ramp_delay)
+{
+ struct bd71837_pmic *pmic = rdev_get_drvdata(rdev);
+ struct bd71837 *mfd = pmic->mfd;
+ int id = rdev->desc->id;
+ unsigned int ramp_value = BUCK_RAMPRATE_10P00MV;
+
+ dev_dbg(&(pmic->pdev->dev), "Buck[%d] Set Ramp = %d\n", id + 1,
+ ramp_delay);
+ switch (ramp_delay) {
+ case 1 ... 1250:
+ ramp_value = BUCK_RAMPRATE_1P25MV;
+ break;
+ case 1251 ... 2500:
+ ramp_value = BUCK_RAMPRATE_2P50MV;
+ break;
+ case 2501 ... 5000:
+ ramp_value = BUCK_RAMPRATE_5P00MV;
+ break;
+ case 5001 ... 10000:
+ ramp_value = BUCK_RAMPRATE_10P00MV;
+ break;
+ default:
+ ramp_value = BUCK_RAMPRATE_10P00MV;
+ dev_err(&pmic->pdev->dev,
+ "%s: ramp_delay: %d not supported, setting 10000mV//us\n",
+ rdev->desc->name, ramp_delay);
+ }
+
+ return regmap_update_bits(mfd->regmap, BD71837_REG_BUCK1_CTRL + id,
+ BUCK_RAMPRATE_MASK, ramp_value << 6);
+}
+
+/* Bucks 1 to 4 support DVS. PWM mode is used when voltage is changed.
+ * Bucks 5 to 8 and LDOs can use PFM and must be disabled when voltage
+ * is changed. Hence we return -EBUSY for these if voltage is changed
+ * when BUCK/LDO is enabled.
+ */
+static int bd71837_set_voltage_sel_restricted(struct regulator_dev *rdev,
+ unsigned int sel)
+{
+ int ret;
+
+ ret = regulator_is_enabled_regmap(rdev);
+ if (!ret)
+ ret = regulator_set_voltage_sel_regmap(rdev, sel);
+ else if (ret == 1)
+ ret = -EBUSY;
+ return ret;
+}
+
+static struct regulator_ops bd71837_ldo_regulator_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_linear_range,
+ .set_voltage_sel = bd71837_set_voltage_sel_restricted,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+};
+
+static struct regulator_ops bd71837_ldo_regulator_nolinear_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_table,
+ .set_voltage_sel = bd71837_set_voltage_sel_restricted,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+};
+
+static struct regulator_ops bd71837_buck_regulator_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_linear_range,
+ .set_voltage_sel = bd71837_set_voltage_sel_restricted,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+};
+
+static struct regulator_ops bd71837_buck_regulator_nolinear_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_table,
+ .set_voltage_sel = bd71837_set_voltage_sel_restricted,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+};
+
+static struct regulator_ops bd71837_buck1234_regulator_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_linear_range,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .set_ramp_delay = bd71837_buck1234_set_ramp_delay,
+};
+
+/*
+ * BUCK1/2/3/4
+ * 0.70 to 1.30V (10mV step)
+ */
+static const struct regulator_linear_range bd71837_buck1234_voltage_ranges[] = {
+ REGULATOR_LINEAR_RANGE(700000, 0x00, 0x3C, 10000),
+ REGULATOR_LINEAR_RANGE(1300000, 0x3D, 0x3F, 0),
+};
+
+/*
+ * BUCK5
+ * 0.9V to 1.35V ()
+ */
+static const struct regulator_linear_range bd71837_buck5_voltage_ranges[] = {
+ REGULATOR_LINEAR_RANGE(700000, 0x00, 0x03, 100000),
+ REGULATOR_LINEAR_RANGE(1050000, 0x04, 0x05, 50000),
+ REGULATOR_LINEAR_RANGE(1200000, 0x06, 0x07, 150000),
+};
+
+/*
+ * BUCK6
+ * 3.0V to 3.3V (step 100mV)
+ */
+static const struct regulator_linear_range bd71837_buck6_voltage_ranges[] = {
+ REGULATOR_LINEAR_RANGE(3000000, 0x00, 0x03, 100000),
+};
+
+/*
+ * BUCK7
+ * 000 = 1.605V
+ * 001 = 1.695V
+ * 010 = 1.755V
+ * 011 = 1.8V (Initial)
+ * 100 = 1.845V
+ * 101 = 1.905V
+ * 110 = 1.95V
+ * 111 = 1.995V
+ */
+static const unsigned int buck_7_volts[] = {
+ 1605000, 1695000, 1755000, 1800000, 1845000, 1905000, 1950000, 1995000
+};
+
+/*
+ * BUCK8
+ * 0.8V to 1.40V (step 10mV)
+ */
+static const struct regulator_linear_range bd71837_buck8_voltage_ranges[] = {
+ REGULATOR_LINEAR_RANGE(800000, 0x00, 0x3C, 10000),
+ REGULATOR_LINEAR_RANGE(1400000, 0x3D, 0x3F, 0),
+};
+
+/*
+ * LDO1
+ * 3.0 to 3.3V (100mV step)
+ */
+static const struct regulator_linear_range bd71837_ldo1_voltage_ranges[] = {
+ REGULATOR_LINEAR_RANGE(3000000, 0x00, 0x03, 100000),
+};
+
+/*
+ * LDO2
+ * 0.8 or 0.9V
+ */
+const unsigned int ldo_2_volts[] = {
+ 900000, 800000
+};
+
+/*
+ * LDO3
+ * 1.8 to 3.3V (100mV step)
+ */
+static const struct regulator_linear_range bd71837_ldo3_voltage_ranges[] = {
+ REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000),
+};
+
+/*
+ * LDO4
+ * 0.9 to 1.8V (100mV step)
+ */
+static const struct regulator_linear_range bd71837_ldo4_voltage_ranges[] = {
+ REGULATOR_LINEAR_RANGE(900000, 0x00, 0x09, 100000),
+ REGULATOR_LINEAR_RANGE(1800000, 0x0A, 0x0F, 0),
+};
+
+/*
+ * LDO5
+ * 1.8 to 3.3V (100mV step)
+ */
+static const struct regulator_linear_range bd71837_ldo5_voltage_ranges[] = {
+ REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000),
+};
+
+/*
+ * LDO6
+ * 0.9 to 1.8V (100mV step)
+ */
+static const struct regulator_linear_range bd71837_ldo6_voltage_ranges[] = {
+ REGULATOR_LINEAR_RANGE(900000, 0x00, 0x09, 100000),
+ REGULATOR_LINEAR_RANGE(1800000, 0x0A, 0x0F, 0),
+};
+
+/*
+ * LDO7
+ * 1.8 to 3.3V (100mV step)
+ */
+static const struct regulator_linear_range bd71837_ldo7_voltage_ranges[] = {
+ REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000),
+};
+
+static const struct regulator_desc bd71837_regulators[] = {
+ {
+ .name = "buck1",
+ .of_match = of_match_ptr("BUCK1"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD71837_BUCK1,
+ .ops = &bd71837_buck1234_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = BD71837_BUCK1_VOLTAGE_NUM,
+ .linear_ranges = bd71837_buck1234_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(bd71837_buck1234_voltage_ranges),
+ .vsel_reg = BD71837_REG_BUCK1_VOLT_RUN,
+ .vsel_mask = BUCK1_RUN_MASK,
+ .enable_reg = BD71837_REG_BUCK1_CTRL,
+ .enable_mask = BD71837_BUCK_EN,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "buck2",
+ .of_match = of_match_ptr("BUCK2"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD71837_BUCK2,
+ .ops = &bd71837_buck1234_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = BD71837_BUCK2_VOLTAGE_NUM,
+ .linear_ranges = bd71837_buck1234_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(bd71837_buck1234_voltage_ranges),
+ .vsel_reg = BD71837_REG_BUCK2_VOLT_RUN,
+ .vsel_mask = BUCK2_RUN_MASK,
+ .enable_reg = BD71837_REG_BUCK2_CTRL,
+ .enable_mask = BD71837_BUCK_EN,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "buck3",
+ .of_match = of_match_ptr("BUCK3"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD71837_BUCK3,
+ .ops = &bd71837_buck1234_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = BD71837_BUCK3_VOLTAGE_NUM,
+ .linear_ranges = bd71837_buck1234_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(bd71837_buck1234_voltage_ranges),
+ .vsel_reg = BD71837_REG_BUCK3_VOLT_RUN,
+ .vsel_mask = BUCK3_RUN_MASK,
+ .enable_reg = BD71837_REG_BUCK3_CTRL,
+ .enable_mask = BD71837_BUCK_EN,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "buck4",
+ .of_match = of_match_ptr("BUCK4"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD71837_BUCK4,
+ .ops = &bd71837_buck1234_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = BD71837_BUCK4_VOLTAGE_NUM,
+ .linear_ranges = bd71837_buck1234_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(bd71837_buck1234_voltage_ranges),
+ .vsel_reg = BD71837_REG_BUCK4_VOLT_RUN,
+ .vsel_mask = BUCK4_RUN_MASK,
+ .enable_reg = BD71837_REG_BUCK4_CTRL,
+ .enable_mask = BD71837_BUCK_EN,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "buck5",
+ .of_match = of_match_ptr("BUCK5"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD71837_BUCK5,
+ .ops = &bd71837_buck_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = BD71837_BUCK5_VOLTAGE_NUM,
+ .linear_ranges = bd71837_buck5_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(bd71837_buck5_voltage_ranges),
+ .vsel_reg = BD71837_REG_BUCK5_VOLT,
+ .vsel_mask = BUCK5_MASK,
+ .enable_reg = BD71837_REG_BUCK5_CTRL,
+ .enable_mask = BD71837_BUCK_EN,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "buck6",
+ .of_match = of_match_ptr("BUCK6"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD71837_BUCK6,
+ .ops = &bd71837_buck_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = BD71837_BUCK6_VOLTAGE_NUM,
+ .linear_ranges = bd71837_buck6_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(bd71837_buck6_voltage_ranges),
+ .vsel_reg = BD71837_REG_BUCK6_VOLT,
+ .vsel_mask = BUCK6_MASK,
+ .enable_reg = BD71837_REG_BUCK6_CTRL,
+ .enable_mask = BD71837_BUCK_EN,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "buck7",
+ .of_match = of_match_ptr("BUCK7"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD71837_BUCK7,
+ .ops = &bd71837_buck_regulator_nolinear_ops,
+ .type = REGULATOR_VOLTAGE,
+ .volt_table = &buck_7_volts[0],
+ .n_voltages = ARRAY_SIZE(buck_7_volts),
+ .vsel_reg = BD71837_REG_BUCK7_VOLT,
+ .vsel_mask = BUCK7_MASK,
+ .enable_reg = BD71837_REG_BUCK7_CTRL,
+ .enable_mask = BD71837_BUCK_EN,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "buck8",
+ .of_match = of_match_ptr("BUCK8"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD71837_BUCK8,
+ .ops = &bd71837_buck_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = BD71837_BUCK8_VOLTAGE_NUM,
+ .linear_ranges = bd71837_buck8_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(bd71837_buck8_voltage_ranges),
+ .vsel_reg = BD71837_REG_BUCK8_VOLT,
+ .vsel_mask = BUCK8_MASK,
+ .enable_reg = BD71837_REG_BUCK8_CTRL,
+ .enable_mask = BD71837_BUCK_EN,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "ldo1",
+ .of_match = of_match_ptr("LDO1"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD71837_LDO1,
+ .ops = &bd71837_ldo_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = BD71837_LDO1_VOLTAGE_NUM,
+ .linear_ranges = bd71837_ldo1_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(bd71837_ldo1_voltage_ranges),
+ .vsel_reg = BD71837_REG_LDO1_VOLT,
+ .vsel_mask = LDO1_MASK,
+ .enable_reg = BD71837_REG_LDO1_VOLT,
+ .enable_mask = BD71837_LDO_EN,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "ldo2",
+ .of_match = of_match_ptr("LDO2"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD71837_LDO2,
+ .ops = &bd71837_ldo_regulator_nolinear_ops,
+ .type = REGULATOR_VOLTAGE,
+ .volt_table = &ldo_2_volts[0],
+ .vsel_reg = BD71837_REG_LDO2_VOLT,
+ .vsel_mask = LDO2_MASK,
+ .n_voltages = ARRAY_SIZE(ldo_2_volts),
+ .n_voltages = BD71837_LDO2_VOLTAGE_NUM,
+ .enable_reg = BD71837_REG_LDO2_VOLT,
+ .enable_mask = BD71837_LDO_EN,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "ldo3",
+ .of_match = of_match_ptr("LDO3"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD71837_LDO3,
+ .ops = &bd71837_ldo_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = BD71837_LDO3_VOLTAGE_NUM,
+ .linear_ranges = bd71837_ldo3_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(bd71837_ldo3_voltage_ranges),
+ .vsel_reg = BD71837_REG_LDO3_VOLT,
+ .vsel_mask = LDO3_MASK,
+ .enable_reg = BD71837_REG_LDO3_VOLT,
+ .enable_mask = BD71837_LDO_EN,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "ldo4",
+ .of_match = of_match_ptr("LDO4"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD71837_LDO4,
+ .ops = &bd71837_ldo_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = BD71837_LDO4_VOLTAGE_NUM,
+ .linear_ranges = bd71837_ldo4_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(bd71837_ldo4_voltage_ranges),
+ .vsel_reg = BD71837_REG_LDO4_VOLT,
+ .vsel_mask = LDO4_MASK,
+ .enable_reg = BD71837_REG_LDO4_VOLT,
+ .enable_mask = BD71837_LDO_EN,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "ldo5",
+ .of_match = of_match_ptr("LDO5"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD71837_LDO5,
+ .ops = &bd71837_ldo_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = BD71837_LDO5_VOLTAGE_NUM,
+ .linear_ranges = bd71837_ldo5_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(bd71837_ldo5_voltage_ranges),
+ /* LDO5 is supplied by buck6 */
+ .supply_name = "buck6",
+ .vsel_reg = BD71837_REG_LDO5_VOLT,
+ .vsel_mask = LDO5_MASK,
+ .enable_reg = BD71837_REG_LDO5_VOLT,
+ .enable_mask = BD71837_LDO_EN,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "ldo6",
+ .of_match = of_match_ptr("LDO6"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD71837_LDO6,
+ .ops = &bd71837_ldo_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = BD71837_LDO6_VOLTAGE_NUM,
+ .linear_ranges = bd71837_ldo6_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(bd71837_ldo6_voltage_ranges),
+ /* LDO6 is supplied by buck7 */
+ .supply_name = "buck7",
+ .vsel_reg = BD71837_REG_LDO6_VOLT,
+ .vsel_mask = LDO6_MASK,
+ .enable_reg = BD71837_REG_LDO6_VOLT,
+ .enable_mask = BD71837_LDO_EN,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "ldo7",
+ .of_match = of_match_ptr("LDO7"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD71837_LDO7,
+ .ops = &bd71837_ldo_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = BD71837_LDO7_VOLTAGE_NUM,
+ .linear_ranges = bd71837_ldo7_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(bd71837_ldo7_voltage_ranges),
+ .vsel_reg = BD71837_REG_LDO7_VOLT,
+ .vsel_mask = LDO7_MASK,
+ .enable_reg = BD71837_REG_LDO7_VOLT,
+ .enable_mask = BD71837_LDO_EN,
+ .owner = THIS_MODULE,
+ },
+};
+
+struct reg_init {
+ unsigned int reg;
+ unsigned int mask;
+};
+
+static int bd71837_probe(struct platform_device *pdev)
+{
+ struct bd71837_pmic *pmic;
+ struct bd71837_board *pdata;
+ struct regulator_config config = { 0 };
+ struct reg_init pmic_regulator_inits[] = {
+ {
+ .reg = BD71837_REG_BUCK1_CTRL,
+ .mask = BD71837_BUCK_SEL,
+ }, {
+ .reg = BD71837_REG_BUCK2_CTRL,
+ .mask = BD71837_BUCK_SEL,
+ }, {
+ .reg = BD71837_REG_BUCK3_CTRL,
+ .mask = BD71837_BUCK_SEL,
+ }, {
+ .reg = BD71837_REG_BUCK4_CTRL,
+ .mask = BD71837_BUCK_SEL,
+ }, {
+ .reg = BD71837_REG_BUCK5_CTRL,
+ .mask = BD71837_BUCK_SEL,
+ }, {
+ .reg = BD71837_REG_BUCK6_CTRL,
+ .mask = BD71837_BUCK_SEL,
+ }, {
+ .reg = BD71837_REG_BUCK7_CTRL,
+ .mask = BD71837_BUCK_SEL,
+ }, {
+ .reg = BD71837_REG_BUCK8_CTRL,
+ .mask = BD71837_BUCK_SEL,
+ }, {
+ .reg = BD71837_REG_LDO1_VOLT,
+ .mask = BD71837_LDO_SEL,
+ }, {
+ .reg = BD71837_REG_LDO2_VOLT,
+ .mask = BD71837_LDO_SEL,
+ }, {
+ .reg = BD71837_REG_LDO3_VOLT,
+ .mask = BD71837_LDO_SEL,
+ }, {
+ .reg = BD71837_REG_LDO4_VOLT,
+ .mask = BD71837_LDO_SEL,
+ }, {
+ .reg = BD71837_REG_LDO5_VOLT,
+ .mask = BD71837_LDO_SEL,
+ }, {
+ .reg = BD71837_REG_LDO6_VOLT,
+ .mask = BD71837_LDO_SEL,
+ }, {
+ .reg = BD71837_REG_LDO7_VOLT,
+ .mask = BD71837_LDO_SEL,
+ }
+ };
+
+ int i, err;
+
+ pmic = devm_kzalloc(&pdev->dev, sizeof(struct bd71837_pmic),
+ GFP_KERNEL);
+ if (!pmic)
+ return -ENOMEM;
+
+ memcpy(pmic->descs, bd71837_regulators, sizeof(pmic->descs));
+
+ pmic->pdev = pdev;
+ pmic->mfd = dev_get_drvdata(pdev->dev.parent);
+
+ if (!pmic->mfd) {
+ dev_err(&pdev->dev, "No MFD driver data\n");
+ err = -EINVAL;
+ goto err;
+ }
+ platform_set_drvdata(pdev, pmic);
+ pdata = dev_get_platdata(pmic->mfd->dev);
+
+ /* Register LOCK release */
+ err = regmap_update_bits(pmic->mfd->regmap, BD71837_REG_REGLOCK,
+ (REGLOCK_PWRSEQ | REGLOCK_VREG), 0);
+ if (err) {
+ dev_err(&pmic->pdev->dev, "Failed to unlock PMIC (%d)\n", err);
+ goto err;
+ } else {
+ dev_dbg(&pmic->pdev->dev, "%s: Unlocked lock register 0x%x\n",
+ __func__, BD71837_REG_REGLOCK);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(pmic_regulator_inits); i++) {
+
+ struct regulator_desc *desc;
+ struct regulator_dev *rdev;
+
+ desc = &pmic->descs[i];
+
+ if (pdata)
+ config.init_data = pdata->init_data[i];
+
+ config.dev = pdev->dev.parent;
+ config.driver_data = pmic;
+ config.regmap = pmic->mfd->regmap;
+
+ rdev = devm_regulator_register(&pdev->dev, desc, &config);
+ if (IS_ERR(rdev)) {
+ dev_err(pmic->mfd->dev,
+ "failed to register %s regulator\n",
+ desc->name);
+ err = PTR_ERR(rdev);
+ goto err;
+ }
+ /* Regulator register gets the regulator constraints and
+ * applies them (set_machine_constraints). This should have
+ * turned the control register(s) to correct values and we
+ * can now switch the control from PMIC state machine to the
+ * register interface
+ */
+ err = regmap_update_bits(pmic->mfd->regmap,
+ pmic_regulator_inits[i].reg,
+ pmic_regulator_inits[i].mask,
+ 0xFFFFFFFF);
+ if (err) {
+ dev_err(&pmic->pdev->dev,
+ "Failed to write BUCK/LDO SEL bit for (%s)\n",
+ desc->name);
+ goto err;
+ }
+
+ pmic->rdev[i] = rdev;
+ }
+
+ return 0;
+
+err:
+ return err;
+}
+
+static struct platform_driver bd71837_regulator = {
+ .driver = {
+ .name = "bd71837-pmic",
+ .owner = THIS_MODULE,
+ },
+ .probe = bd71837_probe,
+};
+
+module_platform_driver(bd71837_regulator);
+
+MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
+MODULE_DESCRIPTION("BD71837 voltage regulator driver");
+MODULE_LICENSE("GPL");
--
2.17.0
\
 
 \ /
  Last update: 2018-05-30 13:03    [W:0.183 / U:2.932 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site