[lkml]   [2018]   [May]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v4 0/2] regulator: add QCOM RPMh regulator driver
Hello Mark,

On 05/30/2018 09:33 AM, Mark Brown wrote:
> On Tue, May 22, 2018 at 07:43:16PM -0700, David Collins wrote:
>> This patch series adds a driver and device tree binding documentation for
>> PMIC regulator control via Resource Power Manager-hardened (RPMh) on some
>> Qualcomm Technologies, Inc. SoCs such as SDM845. RPMh is a hardware block
> So, this is a very big driver and obviously it being RPM based it
> doesn't look like other regulators which is causing problems, especially
> when coupled with the desire to implement a bunch of more exotic
> features like the mode setting. I think this review is going to go a
> lot more smoothly if you split this up into a base driver with just
> normal, standard stuff that doesn't add too many custom properties or
> unusual ways of working and then a series of patches on top of that
> adding things like the mode adjustment and interaction with other RPM
> clients.
> We've got other RPM based regulators in tree already so the baseline bit
> shouldn't be too hard, that'll make the rest of the patches much smaller
> and easier to review and mean that the bits that are simpler and easier
> to cope with don't need to be reposted.

I'll split up the patches so that reviewing is easier. For the base
patch, would you prefer that I remove *all* mode support (handled by
generic regulator framework DT properties) or only remove the special
purpose drms mode handling support (i.e. qcom,regulator-drms-modes and


The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

 \ /
  Last update: 2018-05-31 02:13    [W:0.108 / U:0.676 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site