lkml.org 
[lkml]   [2018]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 02/14] mtd: rawnand: denali: use helper function for ecc setup
Date
Now, the NAND base layer has helper function for ecc
parameters setup which does the same thing.

CC: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
---
* Changes from v1:

NEW PATCH

drivers/mtd/nand/raw/denali.c | 30 ++----------------------------
1 file changed, 2 insertions(+), 28 deletions(-)

diff --git a/drivers/mtd/nand/raw/denali.c b/drivers/mtd/nand/raw/denali.c
index 2a302a1..d75f4e5 100644
--- a/drivers/mtd/nand/raw/denali.c
+++ b/drivers/mtd/nand/raw/denali.c
@@ -1120,33 +1120,6 @@ int denali_calc_ecc_bytes(int step_size, int strength)
}
EXPORT_SYMBOL(denali_calc_ecc_bytes);

-static int denali_ecc_setup(struct mtd_info *mtd, struct nand_chip *chip,
- struct denali_nand_info *denali)
-{
- int oobavail = mtd->oobsize - denali->oob_skip_bytes;
- int ret;
-
- /*
- * If .size and .strength are already set (usually by DT),
- * check if they are supported by this controller.
- */
- if (chip->ecc.size && chip->ecc.strength)
- return nand_check_ecc_caps(chip, denali->ecc_caps, oobavail);
-
- /*
- * We want .size and .strength closest to the chip's requirement
- * unless NAND_ECC_MAXIMIZE is requested.
- */
- if (!(chip->ecc.options & NAND_ECC_MAXIMIZE)) {
- ret = nand_match_ecc_req(chip, denali->ecc_caps, oobavail);
- if (!ret)
- return 0;
- }
-
- /* Max ECC strength is the last thing we can do */
- return nand_maximize_ecc(chip, denali->ecc_caps, oobavail);
-}
-
static int denali_ooblayout_ecc(struct mtd_info *mtd, int section,
struct mtd_oob_region *oobregion)
{
@@ -1317,7 +1290,8 @@ int denali_init(struct denali_nand_info *denali)
chip->ecc.mode = NAND_ECC_HW_SYNDROME;
chip->options |= NAND_NO_SUBPAGE_WRITE;

- ret = denali_ecc_setup(mtd, chip, denali);
+ ret = nand_ecc_param_setup(chip, denali->ecc_caps,
+ mtd->oobsize - denali->oob_skip_bytes);
if (ret) {
dev_err(denali->dev, "Failed to setup ECC settings.\n");
goto disable_irq;
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc.
is a member of Code Aurora Forum, hosted by The Linux Foundation
\
 
 \ /
  Last update: 2018-05-03 14:25    [W:0.218 / U:3.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site