lkml.org 
[lkml]   [2018]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1 2/3] ARM: dts: stm32: add cec pins to stm32mp157c
From
Date
Hi Yannick

On 04/24/2018 09:54 AM, yannick fertre wrote:
> This patch adds cec support on stm32mp157c eval board.
>
> Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
> ---
> arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
> index 6f044100..67b0349 100644
> --- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
> @@ -14,6 +14,15 @@
> ranges = <0 0x50002000 0xa400>;
> pins-are-numbered;
>
> + cec_pins_a: cec@0 {
> + pins {
> + pinmux = <STM32_PINMUX('A', 15, AF4)>;
> + bias-disable;
> + drive-open-drain;
> + slew-rate = <0>;
> + };
> + };
> +
> gpioa: gpio@50002000 {
> gpio-controller;
> #gpio-cells = <2>;
>
Next time, please put pins group after gpio controller and don't use
cec@0 but cec-0 to declare pins group. I'll change it this time during
merge.

Thanks
Alex

\
 
 \ /
  Last update: 2018-05-03 14:17    [W:0.090 / U:19.964 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site