lkml.org 
[lkml]   [2018]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: B53 DSA switch problem on Banana Pi-R1 on Fedora 26 - systemd-networkd problem
From
Date
On 27.05.2018 22:35, Florian Fainelli wrote:
> Le 05/27/18 à 12:18, Gerhard Wiesinger a écrit :
>> On 27.05.2018 21:01, Gerhard Wiesinger wrote:
>>> On 24.05.2018 08:22, Gerhard Wiesinger wrote:
>>>> On 24.05.2018 07:29, Gerhard Wiesinger wrote:
>>>>> After some analysis with Florian (thnx) we found out that the
>>>>> current implementation is broken:
>>>>>
>>>>> https://patchwork.ozlabs.org/patch/836538/
>>>>> https://github.com/torvalds/linux/commit/c499696e7901bda18385ac723b7bd27c3a4af624#diff-a2b6f8d89e18de600e873ac3ac43fa1d
>>>>>
>>>>>
>>>>> Florians comment:
>>>>>
>>>>> c499696e7901bda18385ac723b7bd27c3a4af624 ("net: dsa: b53: Stop using
>>>>> dev->cpu_port incorrectly") since it would result in no longer setting
>>>>> the CPU port as tagged for a specific VLAN. Easiest way for you right
>>>>> now is to just revert it, but this needs some more thoughts for a
>>>>> proper
>>>>> upstream change. I will think about it some more.
>>>> Can confirm 4.14.18-200.fc26.armv7hl works, 4.15.x should be broken.
>>>>
>>>> # Kernel 4.14.x ok
>>>> https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/log/drivers/net/dsa/b53?h=v4.14.43
>>>>
>>>> # Kernel 4.15.x should be NOT ok
>>>> https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/log/drivers/net/dsa/b53?h=v4.15.18
>>>>
>>>
>> Forgot to mention: What's also strange is that the VLAN ID is very high:
>>
>> # 4.14.18-300.fc27.armv7hl, iproute-4.15.0-1.fc28.armv7hl
>> ip -d link show eth0.101 | grep "vlan protocol"
>>     vlan protocol 802.1Q id 3069279796 <REORDER_HDR>
>> ip -d link show eth0.102 | grep "vlan protocol"
>>     vlan protocol 802.1Q id 3068673588 <REORDER_HDR>
>>
>> On older kernels this looks ok: 4.12.8-200.fc25.armv7hl,
>> iproute-4.11.0-1.fc25.armv7hl:
>>  ip -d link show eth0.101 | grep "vlan protocol"
>>     vlan protocol 802.1Q id 101 <REORDER_HDR>
>> ip -d link show eth0.102 | grep "vlan protocol"
>>     vlan protocol 802.1Q id 102 <REORDER_HDR>
>>
>> Ideas?
> That is quite likely a kernel/iproute2 issue, if you configured the
> switch through bridge vlan to have the ports in VLAN 101 and VLAN 102
> and you do indeed see frames entering eth0 with these VLAN IDs, then
> clearly the bridge -> switchdev -> dsa -> b53 part is working just fine
> and what you are seeing is some for of kernel header/netlink
> incompatibility.

Yes, sniffing on eth0 shows the correct VLAN IDs, e.g. 101.

Yes, my guess is that tools are wrong and have random values on 2 calls
in different values (e.g. alsopromiscuity ) , see below ....

Who can fix it?

BTW: On FC27 same issue with same kernel version, but guess older
iproute version.

Ciao,

Gerhard


ip -d link show eth0.101

13: eth0.101@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
noqueue master br0 state UP mode DEFAULT group default qlen 1000
    link/ether 02:18:09:ab:cd:ef brd ff:ff:ff:ff:ff:ff promiscuity
3068661300
    vlan protocol 802.1Q id 3068661300 <REORDER_HDR>
    bridge_slave state forwarding priority 32 cost 4 hairpin off guard
off root_block off fastleave off learning on flood on port_id 0x8005
port_no 0x5 designa
ted_port 3068661300 designated_cost 3068661300 designated_bridge
8000.66:5d:a2:ab:cd:ef designated_root 8000.66:5d:a2:ab:cd:ef
hold_timer    0.00 message_age_tim
er    0.00 forward_delay_timer    0.00 topology_change_ack 3068661300
config_pending 3068661300 proxy_arp off proxy_arp_wifi off mcast_router
3068661300 mcast_
fast_leave off mcast_flood on vlan_tunnel off addrgenmode eui64
numtxqueues 3068661300 numrxqueues 3068661300 gso_max_size 3068661300
gso_max_segs 3068661300

ip -d link show eth0.101
13: eth0.101@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
noqueue master br0 state UP mode DEFAULT group default qlen 1000
    link/ether 02:18:09:ab:cd:ef brd ff:ff:ff:ff:ff:ff promiscuity
3068735028
    vlan protocol 802.1Q id 3068735028 <REORDER_HDR>
    bridge_slave state forwarding priority 32 cost 4 hairpin off guard
off root_block off fastleave off learning on flood on port_id 0x8005
port_no 0x5 designa
ted_port 3068735028 designated_cost 3068735028 designated_bridge
8000.66:5d:ab:cd:ef designated_root 8000.66:5d:a2:ab:cd:ef hold_timer   
0.00 message_age_tim
er    0.00 forward_delay_timer    0.00 topology_change_ack 3068735028
config_pending 3068735028 proxy_arp off proxy_arp_wifi off mcast_router
3068735028 mcast_
fast_leave off mcast_flood on vlan_tunnel off addrgenmode eui64
numtxqueues 3068735028 numrxqueues 3068735028 gso_max_size 3068735028
gso_max_segs 3068735028


\
 
 \ /
  Last update: 2018-05-28 07:25    [W:0.062 / U:0.956 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site