lkml.org 
[lkml]   [2018]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 2/3] platform: x86: intel_cht_int33fe: Fix dependencies
From
Date
On Wed, 2018-05-23 at 17:37 +0300, Heikki Krogerus wrote:
> The driver will not probe unless bq24190 is loaded, so
> making it a dependency.
>

Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

assuming it will go through some other tree.

> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> Cc: Wolfram Sang <wsa@the-dreams.de>
> Cc: Darren Hart <dvhart@infradead.org>
> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
> drivers/i2c/busses/Kconfig | 3 +--
> drivers/platform/x86/Kconfig | 4 ++--
> 2 files changed, 3 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index 99edffae27f6..4f8df2ec87b1 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -202,8 +202,7 @@ config I2C_CHT_WC
>
> Note this controller is hooked up to a TI bq24292i charger-
> IC,
> combined with a FUSB302 Type-C port-controller as such it
> is advised
> - to also select CONFIG_CHARGER_BQ24190=m and
> CONFIG_TYPEC_FUSB302=m
> - (the fusb302 driver currently is in drivers/staging).
> + to also select CONFIG_TYPEC_FUSB302=m.
>
> config I2C_NFORCE2
> tristate "Nvidia nForce2, nForce3 and nForce4"
> diff --git a/drivers/platform/x86/Kconfig
> b/drivers/platform/x86/Kconfig
> index 566644bb496a..f27cb186437d 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -866,6 +866,7 @@ config ACPI_CMPC
> config INTEL_CHT_INT33FE
> tristate "Intel Cherry Trail ACPI INT33FE Driver"
> depends on X86 && ACPI && I2C && REGULATOR
> + depends on CHARGER_BQ24190=y || (CHARGER_BQ24190=m && m)
> ---help---
> This driver add support for the INT33FE ACPI device found
> on
> some Intel Cherry Trail devices.
> @@ -877,8 +878,7 @@ config INTEL_CHT_INT33FE
> i2c drivers for these chips can bind to the them.
>
> If you enable this driver it is advised to also select
> - CONFIG_TYPEC_FUSB302=m, CONFIG_CHARGER_BQ24190=m and
> - CONFIG_BATTERY_MAX17042=m.
> + CONFIG_TYPEC_FUSB302=m and CONFIG_BATTERY_MAX17042=m.
>
> config INTEL_INT0002_VGPIO
> tristate "Intel ACPI INT0002 Virtual GPIO driver"

--
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy

\
 
 \ /
  Last update: 2018-05-28 15:23    [W:0.049 / U:5.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site