lkml.org 
[lkml]   [2018]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: WARNING and PANIC in irq_matrix_free
Hi,

We are seeing something probably related.

We run ethtool on a system with Broadcom NIC to increase number of
combined queues.


[root@ ~]# ethtool -l eth0
Channel parameters for eth0:
Pre-set maximums:
RX: 9
TX: 8
Other: 0
Combined: 17
Current hardware settings:
RX: 0
TX: 0
Other: 0
Combined: 8

[root@ ~]# ethtool -L eth0 combined 16

The last command PANIC the kernel easily (5 out of 5 in my tests).

I haven't got luck to catch much console output, the only line I got is:

[ 504.727865] WARNING: CPU: 10 PID: 0 at kernel/irq/matrix.c:371
irq_matrix_free+0x32/0xd0

The NIC we have is

Broadcom Limited BCM57302 NetXtreme-C 10Gb/25Gb Ethernet Controller

Thanks,
Song

On Wed, May 23, 2018 at 1:49 AM, Thomas Gleixner <tglx@linutronix.de> wrote:
> On Wed, 23 May 2018, Tariq Toukan wrote:
>> On 19/05/2018 2:20 PM, Thomas Gleixner wrote:
>> > On Fri, 18 May 2018, Dmitry Safonov wrote:
>> > > I'm not entirely sure that it's the same fault, but at least backtrace
>> > > looks resembling.
>> >
>> > Yes, it's similar, but not the same issue. I'll stare are the code ...
>> >
>> > Thanks,
>> >
>> > tglx
>> >
>>
>> We still see the issue in our daily regression runs.
>> I have your patch merged into my internal branch, it prints the following:
>>
>> [ 4898.226258] Trying to clear prev_vector: 0
>> [ 4898.226439] Trying to clear prev_vector: 0
>>
>> i.e. vector(0) is lower than FIRST_EXTERNAL_VECTOR.
>
> Could you please enable the vector and irq matrix trace points and capture
> the trace when this happens?
>
> Thanks,
>
> tglx
>

\
 
 \ /
  Last update: 2018-05-25 22:11    [W:0.091 / U:2.952 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site