lkml.org 
[lkml]   [2018]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v2] dcdbas: Add support for WSMT ACPI table
Date

On 05/16/2018 9:06 AM, Stuart Hayes wrote:
> If the WSMT ACPI table is present and indicates that a fixed communication
> buffer should be used, use the firmware-specified buffer instead of
> allocating a buffer in memory for communications between the dcdbas driver
> and firmare.
>
> Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
> ---
> v2 Bumped driver version to 5.6.0-3.3
>
>
> drivers/firmware/Kconfig | 2 +-
> drivers/firmware/dcdbas.c | 102
> +++++++++++++++++++++++++++++++++++++++++++---
> drivers/firmware/dcdbas.h | 11 +++++
> 3 files changed, 109 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index
> b7c748248e53..a2bd6092bfa1 100644
> --- a/drivers/firmware/Kconfig
> +++ b/drivers/firmware/Kconfig
> @@ -125,7 +125,7 @@ config DELL_RBU
>
> config DCDBAS
> tristate "Dell Systems Management Base Driver"
> - depends on X86
> + depends on X86 && ACPI
> help
> The Dell Systems Management Base Driver provides a sysfs
> interface
> for systems management software to perform System
> Management diff --git a/drivers/firmware/dcdbas.c
> b/drivers/firmware/dcdbas.c index 0bdea60c65dd..1699cfdcefe4 100644
> --- a/drivers/firmware/dcdbas.c
> +++ b/drivers/firmware/dcdbas.c
> @@ -36,12 +36,13 @@
> #include <linux/string.h>
> #include <linux/types.h>
> #include <linux/mutex.h>
> +#include <linux/acpi.h>
> #include <asm/io.h>
>
> #include "dcdbas.h"
>
> #define DRIVER_NAME "dcdbas"
> -#define DRIVER_VERSION "5.6.0-3.2"
> +#define DRIVER_VERSION "5.6.0-3.3"
> #define DRIVER_DESCRIPTION "Dell Systems Management Base Driver"
>
> static struct platform_device *dcdbas_pdev; @@ -49,19 +50,23 @@ static
> struct platform_device *dcdbas_pdev; static u8 *smi_data_buf; static
> dma_addr_t smi_data_buf_handle; static unsigned long smi_data_buf_size;
> +static unsigned long max_smi_data_buf_size = MAX_SMI_DATA_BUF_SIZE;
> static u32 smi_data_buf_phys_addr;
> static DEFINE_MUTEX(smi_data_lock);
> +static u8 *eps_buffer;
>
> static unsigned int host_control_action; static unsigned int
> host_control_smi_type; static unsigned int host_control_on_shutdown;
>
> +static bool wsmt_enabled;
> +
> /**
> * smi_data_buf_free: free SMI data buffer
> */
> static void smi_data_buf_free(void)
> {
> - if (!smi_data_buf)
> + if (!smi_data_buf || wsmt_enabled)
> return;
>
> dev_dbg(&dcdbas_pdev->dev, "%s: phys: %x size: %lu\n", @@ -86,7
> +91,7 @@ static int smi_data_buf_realloc(unsigned long size)
> if (smi_data_buf_size >= size)
> return 0;
>
> - if (size > MAX_SMI_DATA_BUF_SIZE)
> + if (size > max_smi_data_buf_size)
> return -EINVAL;
>
> /* new buffer is needed */
> @@ -169,7 +174,7 @@ static ssize_t smi_data_write(struct file *filp, struct
> kobject *kobj, {
> ssize_t ret;
>
> - if ((pos + count) > MAX_SMI_DATA_BUF_SIZE)
> + if ((pos + count) > max_smi_data_buf_size)
> return -EINVAL;
>
> mutex_lock(&smi_data_lock);
> @@ -323,7 +328,8 @@ static ssize_t smi_request_store(struct device *dev,
> break;
> case 1:
> /* Calling Interface SMI */
> - smi_cmd->ebx = (u32) virt_to_phys(smi_cmd-
> >command_buffer);
> + smi_cmd->ebx = smi_data_buf_phys_addr
> + + offsetof(struct smi_cmd,
> command_buffer);
> ret = dcdbas_smi_request(smi_cmd);
> if (!ret)
> ret = count;
> @@ -482,6 +488,85 @@ static void dcdbas_host_control(void)
> }
> }
>
> +/* WSMT */
> +
> +static u8 checksum(u8 *buffer, u8 length) {
> + u8 sum = 0;
> + u8 *end = buffer + length;
> +
> + while (buffer < end)
> + sum = (u8)(sum + *(buffer++));
> + return sum;
> +}
> +
> +static inline struct smm_eps_table *check_eps_table(u8 *addr) {
> + struct smm_eps_table *eps = (struct smm_eps_table *)addr;
> +
> + if (strncmp(SMM_EPS_SIG, eps->smm_comm_buff_anchor, 4) != 0)
> + return NULL;
> +
> + if (checksum(addr, eps->length) != 0)
> + return NULL;
> +
> + return eps;
> +}
> +
> +static int dcdbas_check_wsmt(void)
> +{
> + struct acpi_table_wsmt *wsmt = NULL;
> + struct smm_eps_table *eps = NULL;
> + u8 *addr;
> +
> + acpi_get_table(ACPI_SIG_WSMT, 0, (struct acpi_table_header
> **)&wsmt);
> + if (!wsmt)
> + return 0;
> +
> + /* Check if WSMT ACPI table shows that protection is enabled */
> + if (!(wsmt->protection_flags &
> ACPI_WSMT_FIXED_COMM_BUFFERS)
> + || !(wsmt->protection_flags
> + &
> ACPI_WSMT_COMM_BUFFER_NESTED_PTR_PROTECTION))
> + return 0;
> +
> + /* Scan for EPS (entry point structure) */
> + for (addr = (u8 *)__va(0xf0000);
> + addr < (u8 *)__va(0x100000 - sizeof(struct smm_eps_table)) &&
> !eps;
> + addr += 1)
> + eps = check_eps_table(addr);
> +
> + if (!eps) {
> + dev_dbg(&dcdbas_pdev->dev, "found WSMT, but no EPS
> found\n");
> + return -ENODEV;
> + }
> +
> + /*
> + * Get physical address of buffer and map to virtual address.
> + * Table gives size in 4K pages, regardless of actual system page size.
> + */
> + if (eps->smm_comm_buff_addr + 8 > U32_MAX) {
> + dev_warn(&dcdbas_pdev->dev, "found WSMT, but EPS
> buffer address is above 4GB\n");
> + return -EINVAL;
> + }
> + eps_buffer = (u8 *)memremap(eps->smm_comm_buff_addr,
> + eps->num_of_4k_pages * 4096,
> MEMREMAP_WB);
> + if (!eps_buffer) {
> + dev_warn(&dcdbas_pdev->dev, "found WSMT, but failed to
> map EPS buffer\n");
> + return -ENOMEM;
> + }
> +
> + /* First 8 bytes of buffer is for semaphore */
> + smi_data_buf_phys_addr = (u32) eps->smm_comm_buff_addr + 8;
> + smi_data_buf = eps_buffer + 8;
> + smi_data_buf_size = (unsigned long) min(eps->num_of_4k_pages *
> 4096 - 8,
> + (u64) ULONG_MAX);
> + max_smi_data_buf_size = smi_data_buf_size;
> + wsmt_enabled = true;
> + dev_info(&dcdbas_pdev->dev,
> + "WSMT found, using firmware-provided SMI buffer.\n");
> + return 1;
> +}
> +
> /**
> * dcdbas_reboot_notify: handle reboot notification for host control
> */
> @@ -548,6 +633,11 @@ static int dcdbas_probe(struct platform_device
> *dev)
>
> dcdbas_pdev = dev;
>
> + /* Check if ACPI WSMT table specifies protected SMI buffer address
> */
> + error = dcdbas_check_wsmt();
> + if (error < 0)
> + return error;
> +
> /*
> * BIOS SMI calls require buffer addresses be in 32-bit address space.
> * This is done by setting the DMA mask below.
> @@ -635,6 +725,8 @@ static void __exit dcdbas_exit(void)
> */
> if (dcdbas_pdev)
> smi_data_buf_free();
> + if (eps_buffer)
> + memunmap(eps_buffer);
> platform_device_unregister(dcdbas_pdev_reg);
> platform_driver_unregister(&dcdbas_driver);
> }
> diff --git a/drivers/firmware/dcdbas.h b/drivers/firmware/dcdbas.h index
> ca3cb0a54ab6..7ea5b3e070b9 100644
> --- a/drivers/firmware/dcdbas.h
> +++ b/drivers/firmware/dcdbas.h
> @@ -54,6 +54,8 @@
>
> #define SMI_CMD_MAGIC (0x534D4931)
>
> +#define SMM_EPS_SIG "$SCB"
> +
> #define DCDBAS_DEV_ATTR_RW(_name) \
> DEVICE_ATTR(_name,0600,_name##_show,_name##_store);
>
> @@ -103,5 +105,14 @@ struct apm_cmd {
>
> int dcdbas_smi_request(struct smi_cmd *smi_cmd);
>
> +struct smm_eps_table {
> + char smm_comm_buff_anchor[4];
> + u8 length;
> + u8 checksum;
> + u8 version;
> + u64 smm_comm_buff_addr;
> + u64 num_of_4k_pages;
> +} __packed;
> +
> #endif /* _DCDBAS_H_ */
>
> --
> 2.14.2

Acked-by: Doug Warzecha <douglas_warzecha@dell.com>

\
 
 \ /
  Last update: 2018-05-25 21:02    [W:0.203 / U:0.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site