lkml.org 
[lkml]   [2018]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 05/15] arm: dts: uniphier: Add missing cooling device properties for CPUs
Date
The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.

Add such missing properties.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/boot/dts/uniphier-pxs2.dtsi | 3 +++
1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi
index debcbd15c24b..40ed15465095 100644
--- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -36,6 +36,7 @@
enable-method = "psci";
next-level-cache = <&l2>;
operating-points-v2 = <&cpu_opp>;
+ #cooling-cells = <2>;
};

cpu2: cpu@2 {
@@ -46,6 +47,7 @@
enable-method = "psci";
next-level-cache = <&l2>;
operating-points-v2 = <&cpu_opp>;
+ #cooling-cells = <2>;
};

cpu3: cpu@3 {
@@ -56,6 +58,7 @@
enable-method = "psci";
next-level-cache = <&l2>;
operating-points-v2 = <&cpu_opp>;
+ #cooling-cells = <2>;
};
};

--
2.15.0.194.g9af6a3dea062
\
 
 \ /
  Last update: 2018-05-25 12:36    [W:0.171 / U:1.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site