lkml.org 
[lkml]   [2018]   [May]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/2] dt-bindings: cpufreq: Introduce QCOM CPUFREQ FW bindings
On 24-05-18, 10:48, Taniya Das wrote:
> Hello Rob, Viresh,
>
> Thank you for the comments. If I understand correctly, the device tree nodes
> should look something like the below.
>
> Though I am not sure if any vendor name could be associated in the cpu
> nodes.

Well Rob said Yes to that I think.

> Please suggest if my understanding is wrong.
>
> cpu@0 {
> qcom,freq-domain = <&freq_domain_table0>;
> …
> };
>
> same follows for cpu 1/2/3
>
> cpu@400 {
> qcom,freq-domain = <&freq_domain_table1>;
> …
> };
> same follows for cpu 5/6/7
>
> freq_domain_table0 : freq_table {
> reg = < >, < >, < > ;
> reg-names = "perf_base", "lut_base", "en_base";
> };
>
> freq_domain_table1 : freq_table {
> reg = < >, < >, < > ;
> reg-names = "perf_base", "lut_base", "en_base";
> };

Mostly yes.

--
viresh

\
 
 \ /
  Last update: 2018-05-24 07:43    [W:0.065 / U:7.812 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site