lkml.org 
[lkml]   [2018]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [REGRESSION] v4.17-rc4: xgalaga fails to start in fullscreen (default) mode
On Wed, May 23, 2018 at 11:39:00AM -0700, Vito Caputo wrote:
> On Wed, May 23, 2018 at 09:20:37PM +0300, Ville Syrjälä wrote:
> > On Wed, May 23, 2018 at 11:06:00AM -0700, Vito Caputo wrote:
> > > On Wed, May 23, 2018 at 04:18:05PM +0300, Ville Syrjälä wrote:
> > > > On Wed, May 23, 2018 at 02:49:19AM -0700, Vito Caputo wrote:
> > > > > On Mon, May 21, 2018 at 02:57:18PM -0700, Vito Caputo wrote:
> > > > > > On Mon, May 21, 2018 at 12:53:20PM -0700, Vito Caputo wrote:
> > > > > > > Hello all,
> > > > > > >
> > > > > > > 4.17-rc4 (my latest kernel ATM) consistently fails to start xgalaga
> > > > > > > without -window. I will try find time to build the latest rc this
> > > > > > > evening.
> > > > > > >
> > > > > > > > ~$ xgalaga
> > > > > > > > X Error of failed request: BadValue (integer parameter out of range for operation)
> > > > > > > > Major opcode of failed request: 152 (XFree86-VidModeExtension)
> > > > > > > > Minor opcode of failed request: 10 (XF86VidModeSwitchToMode)
> > > > > > > > Value in failed request: 0x120004e
> > > > > > > > Serial number of failed request: 199
> > > > > > > > Current serial number in output stream: 203
> > > > > > >
> > > > > > > Haven't dug into this much yet, only did a perfunctory check by booting into a
> > > > > > > few older kernels (4.11, 4.12, 4.16) and the problem is absent on all of them.
> > > > > > > It appears to be a 4.17-specific regression right now.
> > > > > > >
> > > > > > > Also observed, though this is surely a different regression, the game
> > > > > > > ran like molasses with -window, showing some prominent kworkers in top:
> > > > > > >
> > > > > > > 692 vc 20 0 312852 45884 20556 R 32.0 1.2 0:08.69 Xorg
> > > > > > > 102 root 20 0 0 0 0 R 11.2 0.0 0:01.43 kworker/1:3
> > > > > > > 94 root 20 0 0 0 0 I 8.9 0.0 0:00.83 kworker/0:2
> > > > > > > 696 vc 20 0 39948 4124 2912 S 1.0 0.1 0:05.57 vwm
> > > > > > > 902 vc 30 10 46372 4144 3500 S 0.7 0.1 0:00.08 xgalaga
> > > > > > > 891 vc 30 10 44924 3868 3156 R 0.3 0.1 0:00.09 top
> > > > > > > 903 vc 30 10 4180 1184 1100 S 0.3 0.0 0:00.01 xgal.sndsrv.oss
> > > > > > >
> > > > > > > The windowed performance issue was observed on the older kernels tested
> > > > > > > as well, though 4.11 felt better and didn't have the busy kworkers.
> > > > > > >
> > > > > > > I have not attempted to play xgalaga for ages, but it used to be perfectly
> > > > > > > playable on this machine in windowed mode when I last did.
> > > > > > >
> > > > > > > Machine is the venerable Thinkpad X61s, 1.8Ghz, Debian 9, config attached.
> > > > > > >
> > > > > >
> > > > > > Just built and booted v4.17-rc6, still broken.
> > > > >
> > > > > Bisected to:
> > > > >
> > > > > e995ca0b8139c5f6807095464e969931b443f55a is the first bad commit
> > > > > commit e995ca0b8139c5f6807095464e969931b443f55a
> > > > > Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > > > > Date: Tue Nov 14 20:32:58 2017 +0200
> > > > >
> > > > > drm/i915: Provide a device level .mode_valid() hook
> > > > >
> > > > > We never support certain mode flags etc. Reject those early on in the
> > > > > mode_config.mode_valid() hook. That allows us to remove some duplicated
> > > > > checks from the connector .mode_valid() hooks, and it guarantees that
> > > > > we never see those flags even from user mode as the
> > > > > mode_config.mode_valid() hooks gets executed for those as well.
> > > > >
> > > > > Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > > > > Link: https://patchwork.freedesktop.org/patch/msgid/20171114183258.16976-11-ville.syrjala@linux.intel.com
> > > > > Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
> > > >
> > > > Hmm. I guess xgalaga passes some garbage in via xf86vidmode which
> > > > the ddx doesn't validate before passing it on to the kernel. So far
> > > > I can't reproduce the problem here unfortnately.
> > > >
> > > > Can you try the following patch and reproduce the problem with
> > > > drm.debug=0xe passed to the kernel so that we can seewhat the bad
> > > > modeline looks like?
> > > >
> > >
> > > dmesg after xgalaga fails:
> > >
> > > ```
> > > [ 75.617448] [drm:drm_mode_convert_umode] Bad user mode:
> > > [ 75.617455] [drm:drm_mode_debug_printmodeline] Modeline 57:"800x600" 0 81000 800 832 928 1080 600 600 602 625 0x0 0x25
> >
> > 0x20 == dblscan
> >
> > > [ 75.617458] [drm:drm_mode_setcrtc] Invalid mode
> > > ```
> > >
> > > xrandr --verbose:
> > >
> > > ```
> > > Screen 0: minimum 320 x 200, current 1024 x 768, maximum 8192 x 8192
> > > LVDS-1 connected primary 1024x768+0+0 (0x44) normal (normal left inverted right x axis y axis) 246mm x 184mm
> > > Identifier: 0x41
> > > Timestamp: 23375
> > > Subpixel: horizontal rgb
> > > Gamma: 1.0:1.0:1.0
> > > Brightness: 1.0
> > > Clones:
> > > CRTC: 0
> > > CRTCs: 0 1
> > > Transform: 1.000000 0.000000 0.000000
> > > 0.000000 1.000000 0.000000
> > > 0.000000 0.000000 1.000000
> > > filter:
> > > EDID:
> > > 00ffffffffffff0030ae004000000000
> > > 3010010380191278eafe609555518726
> > > 22505421080001010101010101010101
> > > 01010101010128150040410026301888
> > > 3600f6b800000018ed10004041002630
> > > 18883600f6b9000000180000000f0061
> > > 43326143280f01000daf0714000000fe
> > > 004e31323158352d4c303620202000ed
> > > scaling mode: Full aspect
> > > supported: Full, Center, Full aspect
> > > non-desktop: 0
> > > range: (0, 1)
> > > link-status: Good
> > > supported: Good, Bad
> > > 1024x768 (0x44) 54.160MHz -HSync -VSync *current +preferred
> > > h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 40.30KHz
> > > v: height 768 start 771 end 777 total 806 clock 50.00Hz
> > > 1024x768 (0x45) 65.000MHz -HSync -VSync
> > > h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.36KHz
> > > v: height 768 start 771 end 777 total 806 clock 60.00Hz
> > > 1024x768 (0x46) 43.330MHz -HSync -VSync
> > > h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 32.24KHz
> > > v: height 768 start 771 end 777 total 806 clock 40.00Hz
> > > 960x720 (0x47) 117.000MHz -HSync +VSync DoubleScan
> > > h: width 960 start 1024 end 1128 total 1300 skew 0 clock 90.00KHz
> > > v: height 720 start 720 end 722 total 750 clock 60.00Hz
> > > 928x696 (0x48) 109.150MHz -HSync +VSync DoubleScan
> > > h: width 928 start 976 end 1088 total 1264 skew 0 clock 86.35KHz
> > > v: height 696 start 696 end 698 total 719 clock 60.05Hz
> >
> > Where are all these dblscan modes coming from?
> >
> > Did you add them manually or are they being automatically
> > generated by something?
> >
>
> This is pure automagic xserver-xorg-video-intel on i915 drm/kms.
>
> After booting back into a working 4.16 kernel I see the same xrandr --verbose
> list with all the DoubleScan modes, with which xgalaga is functional.
>
> There's this in the Xorg.log:
>
> ```
> [ 12.856] (II) intel(0): Output LVDS1 using monitor section Monitor0
> [ 12.857] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
> [ 12.882] (II) intel(0): Output VGA1 has no monitor section
> [ 12.883] (II) intel(0): EDID for output LVDS1
> [ 12.883] (II) intel(0): Manufacturer: LEN Model: 4000 Serial#: 0
> [ 12.883] (II) intel(0): Year: 2006 Week: 48
> [ 12.883] (II) intel(0): EDID Version: 1.3
> [ 12.883] (II) intel(0): Digital Display Input
> [ 12.883] (II) intel(0): Max Image Size [cm]: horiz.: 25 vert.: 18
> [ 12.883] (II) intel(0): Gamma: 2.20
> [ 12.883] (II) intel(0): DPMS capabilities: StandBy Suspend Off
> [ 12.883] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
> [ 12.883] (II) intel(0): First detailed timing is preferred mode
> [ 12.883] (II) intel(0): redX: 0.585 redY: 0.335 greenX: 0.319 greenY: 0.529
> [ 12.883] (II) intel(0): blueX: 0.149 blueY: 0.135 whiteX: 0.312 whiteY: 0.328
> [ 12.883] (II) intel(0): Supported established timings:
> [ 12.883] (II) intel(0): 640x480@60Hz
> [ 12.883] (II) intel(0): 800x600@60Hz
> [ 12.883] (II) intel(0): 1024x768@60Hz
> [ 12.883] (II) intel(0): Manufacturer's mask: 0
> [ 12.883] (II) intel(0): Supported detailed timing:
> [ 12.883] (II) intel(0): clock: 54.2 MHz Image Size: 246 x 184 mm
> [ 12.883] (II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
> [ 12.883] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
> [ 12.883] (II) intel(0): Supported detailed timing:
> [ 12.883] (II) intel(0): clock: 43.3 MHz Image Size: 246 x 185 mm
> [ 12.883] (II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
> [ 12.883] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
> [ 12.883] (II) intel(0): Unknown vendor-specific block f
> [ 12.883] (II) intel(0): N121X5-L06
> [ 12.883] (II) intel(0): EDID (in hex):
> [ 12.883] (II) intel(0): 00ffffffffffff0030ae004000000000
> [ 12.883] (II) intel(0): 3010010380191278eafe609555518726
> [ 12.883] (II) intel(0): 22505421080001010101010101010101
> [ 12.883] (II) intel(0): 01010101010128150040410026301888
> [ 12.883] (II) intel(0): 3600f6b800000018ed10004041002630
> [ 12.883] (II) intel(0): 18883600f6b9000000180000000f0061
> [ 12.883] (II) intel(0): 43326143280f01000daf0714000000fe
> [ 12.883] (II) intel(0): 004e31323158352d4c303620202000ed
> [ 12.883] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
> [ 12.883] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
> [ 12.883] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
> [ 12.883] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
> [ 12.883] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
> [ 12.883] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
> [ 12.883] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
> [ 12.883] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
> [ 12.883] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
> [ 12.883] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
> [ 12.883] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
> [ 12.883] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
> [ 12.883] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
> [ 12.883] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
> [ 12.883] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
> [ 12.883] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
> [ 12.883] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
> [ 12.883] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
> [ 12.884] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
> [ 12.884] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)

So first it rejected them all, but somehow later they get added back?
Very odd.

Hmm. Must be coming from that default modes thing...

Looks pretty much like ddx bug to me. Does the following ddx patch get
rid of the bogus dblscan modes?

From 40672b8527313d8bc01aa5cdcda8602687ec0f23 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= <ville.syrjala@linux.intel.com>
Date: Wed, 23 May 2018 22:10:07 +0300
Subject: [PATCH xf86-video-intel] Don't accept dblscan from xf86DefaultModes[]

---
src/sna/sna_display.c | 3 +++
src/uxa/intel_display.c | 3 +++
2 files changed, 6 insertions(+)

diff --git a/src/sna/sna_display.c b/src/sna/sna_display.c
index 6f6bea2e9cad..b38a915ca4ec 100644
--- a/src/sna/sna_display.c
+++ b/src/sna/sna_display.c
@@ -4204,6 +4204,8 @@ sna_output_add_default_modes(xf86OutputPtr output, DisplayModePtr modes)
DisplayModePtr i, m, preferred = NULL;
int max_x = 0, max_y = 0, max_clock = 0;
float max_vrefresh = 0.0;
+ int flags = (output->interlaceAllowed ? V_INTERLACE : 0) |
+ (output->doubleScanAllowed ? V_DBLSCAN : 0);

if (mon && GTF_SUPPORTED(mon->features.msc))
return modes;
@@ -4220,6 +4222,7 @@ sna_output_add_default_modes(xf86OutputPtr output, DisplayModePtr modes)

m = default_modes(preferred);
xf86ValidateModesSize(output->scrn, m, max_x, max_y, 0);
+ xf86ValidateModesFlags(output->scrn, m, flags);

for (i = m; i; i = i->next) {
if (i->Clock > max_clock)
diff --git a/src/uxa/intel_display.c b/src/uxa/intel_display.c
index 809cda1dd56b..431727fc4ac2 100644
--- a/src/uxa/intel_display.c
+++ b/src/uxa/intel_display.c
@@ -919,6 +919,8 @@ intel_output_panel_edid(xf86OutputPtr output, DisplayModePtr modes)
DisplayModePtr i, m, p = NULL;
int max_x = 0, max_y = 0;
float max_vrefresh = 0.0;
+ int flags = (output->interlaceAllowed ? V_INTERLACE : 0) |
+ (output->doubleScanAllowed ? V_DBLSCAN : 0);

for (m = modes; m; m = m->next) {
if (m->type & M_T_PREFERRED)
@@ -938,6 +940,7 @@ intel_output_panel_edid(xf86OutputPtr output, DisplayModePtr modes)
#endif

xf86ValidateModesSize(output->scrn, m, max_x, max_y, 0);
+ xf86ValidateModesFlags(output->scrn, m, flags);

for (i = m; i; i = i->next) {
if (xf86ModeVRefresh(i) > max_vrefresh)
--
2.16.1
--
Ville Syrjälä
Intel

\
 
 \ /
  Last update: 2018-05-23 21:13    [W:0.081 / U:0.704 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site