lkml.org 
[lkml]   [2018]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH net-next v3 0/7] Add support for QCA8334 switch
From
Date


On 05/22/2018 11:20 PM, Michal Vokáč wrote:
> This series basically adds support for a QCA8334 ethernet switch to the
> qca8k driver. It is a four-port variant of the already supported seven
> port QCA8337. Register map is the same for the whole familly and all chips
> have the same device ID.
>
> Major part of this series enhances the CPU port setting. Currently the CPU
> port is not set to any sensible defaults compatible with the xGMII
> interface. This series forces the CPU port to its maximum bandwidth and
> also allows to adjust the new defaults using fixed-link device tree
> sub-node.
>
> Alongside these changes I fixed two checkpatch warnings regarding SPDX and
> redundant parentheses.

Looks great, thanks Michal! Do you have any features or things you are
working on that would be added later to the driver?

>
> Changes in v3:
> - Rebased on latest net-next/master.
> - Corrected fixed-link documentation.
>
> Michal Vokáč (7):
> net: dsa: qca8k: Add QCA8334 binding documentation
> net: dsa: qca8k: Add support for QCA8334 switch
> net: dsa: qca8k: Enable RXMAC when bringing up a port
> net: dsa: qca8k: Force CPU port to its highest bandwidth
> net: dsa: qca8k: Allow overwriting CPU port setting
> net: dsa: qca8k: Replace GPL boilerplate by SPDX
> net: dsa: qca8k: Remove redundant parentheses
>
> .../devicetree/bindings/net/dsa/qca8k.txt | 23 +++++++-
> drivers/net/dsa/qca8k.c | 64 ++++++++++++++++++----
> drivers/net/dsa/qca8k.h | 7 ++-
> 3 files changed, 79 insertions(+), 15 deletions(-)
>

--
Florian

\
 
 \ /
  Last update: 2018-05-23 17:39    [W:0.127 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site