lkml.org 
[lkml]   [2018]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 2/5] gpio: syscon: Add gpio-syscon for rockchip
Date
Hi Rob, Levin,

sorry for being late to the party.

Am Mittwoch, 23. Mai 2018, 16:43:07 CEST schrieb Rob Herring:
> On Tue, May 22, 2018 at 9:02 PM, Levin Du <djw@t-chip.com.cn> wrote:
> > On 2018-05-23 2:02 AM, Rob Herring wrote:
> >> On Fri, May 18, 2018 at 11:52:05AM +0800, djw@t-chip.com.cn wrote:
> >>> From: Levin Du <djw@t-chip.com.cn>
> >>>
> >>> Some GPIOs sit in the GRF_SOC_CON registers of Rockchip SoCs,
> >>> which do not belong to the general pinctrl.
> >>>
> >>> Adding gpio-syscon support makes controlling regulator or
> >>> LED using these special pins very easy by reusing existing
> >>> drivers, such as gpio-regulator and led-gpio.
> >>>
> >>> Signed-off-by: Levin Du <djw@t-chip.com.cn>
> >>>
> >>> ---
> >>>
> >>> Changes in v2:
> >>> - Rename gpio_syscon10 to gpio_mute in doc
> >>>
> >>> Changes in v1:
> >>> - Refactured for general gpio-syscon usage for Rockchip SoCs.
> >>> - Add doc rockchip,gpio-syscon.txt
> >>>
> >>> .../bindings/gpio/rockchip,gpio-syscon.txt | 41
> >>>
> >>> ++++++++++++++++++++++
> >>>
> >>> drivers/gpio/gpio-syscon.c | 30
> >>>
> >>> ++++++++++++++++
> >>>
> >>> 2 files changed, 71 insertions(+)
> >>> create mode 100644
> >>>
> >>> Documentation/devicetree/bindings/gpio/rockchip,gpio-syscon.txt
> >>>
> >>> diff --git
> >>> a/Documentation/devicetree/bindings/gpio/rockchip,gpio-syscon.txt
> >>> b/Documentation/devicetree/bindings/gpio/rockchip,gpio-syscon.txt
> >>> new file mode 100644
> >>> index 0000000..b1b2a67
> >>> --- /dev/null
> >>> +++ b/Documentation/devicetree/bindings/gpio/rockchip,gpio-syscon.txt
> >>> @@ -0,0 +1,41 @@
> >>> +* Rockchip GPIO support for GRF_SOC_CON registers
> >>> +
> >>> +Required properties:
> >>> +- compatible: Should contain "rockchip,gpio-syscon".
> >>> +- gpio-controller: Marks the device node as a gpio controller.
> >>> +- #gpio-cells: Should be two. The first cell is the pin number and
> >>> + the second cell is used to specify the gpio polarity:
> >>> + 0 = Active high,
> >>> + 1 = Active low.
> >>
> >> There's no need for this child node. Just make the parent node a gpio
> >> controller.
> >>
> >> Rob
> >
> > Hi Rob, it is not clear to me. Do you suggest that the grf node should be
> > a
> > gpio controller,
> > like below?
> >
> > + grf: syscon at ff100000 {
> > + compatible = "rockchip,gpio-syscon", "rockchip,rk3328-grf",
> > "syscon", "simple-mfd";
>
> Yes, but drop "rockchip,gpio-syscon" and "simple-mfd".

I would disagree quite a bit here. The grf are the "general register files",
a bunch of registers used for quite a lot of things, and so it seems
among other users, also a gpio-controller for some more random pins
not controlled through the regular gpio controllers.

For a more fully stocked grf, please see
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/rk3288.dtsi#n855
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/boot/dts/rockchip/rk3399.dtsi#n1338

So the gpio controller should definitly also be a subnode.

The gpio in question is called "mute", so I'd think the gpio-syscon driver
should just define a "rockchip,rk3328-gpio-mute" compatible and contain
all the register voodoo in the driver itself and not define it in the dt.

So it should probably look like

grf: syscon at ff100000 {
compatible = "rockchip,rk3328-grf", "syscon", "simple-mfd";

[all the other syscon sub-devices]

gpio_mute: gpio-mute {
compatible = "rockchip,rk3328-gpio-mute";
gpio-controller;
#gpio-cells = <2>;
};

[more other syscon sub-devices]
};


Heiko




> > + //...
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > + gpio,syscon-dev = <&grf 0x0428 0>;
>
> And drop this. It may be used in the kernel, but it is not a
> documented property.
>
> > + };
> >
> > or just reserve the following case in the doc?
> >
> > + grf: syscon at ff100000 {
> > + compatible = "rockchip,rk3328-grf", "syscon", "simple-mfd";
> > + //...
> > + };
> > +
> > + gpio_mute: gpio-mute {
> > + compatible = "rockchip,gpio-syscon";
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > + gpio,syscon-dev = <&grf 0x0428 0>;
> > + };
> >
> >
> > Thanks
> > Levin
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe devicetree" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html




\
 
 \ /
  Last update: 2018-05-23 17:14    [W:0.098 / U:0.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site