lkml.org 
[lkml]   [2018]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v11 1/2] cpufreq: Add Kryo CPU scaling driver
Date
In Certain QCOM SoCs like apq8096 and msm8996 that have KRYO processors,
the CPU frequency subset and voltage value of each OPP varies
based on the silicon variant in use. Qualcomm Process Voltage Scaling Tables
defines the voltage and frequency value based on the msm-id in SMEM
and speedbin blown in the efuse combination.
The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
to provide the OPP framework with required information.
This is used to determine the voltage and frequency value for each OPP of
operating-points-v2 table when it is parsed by the OPP framework.

Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
---
drivers/cpufreq/Kconfig.arm | 10 ++
drivers/cpufreq/Makefile | 1 +
drivers/cpufreq/cpufreq-dt-platdev.c | 3 +
drivers/cpufreq/qcom-cpufreq-kryo.c | 181 +++++++++++++++++++++++++++++++++++
4 files changed, 195 insertions(+)
create mode 100644 drivers/cpufreq/qcom-cpufreq-kryo.c

diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index de55c7d..0bfd40e 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -124,6 +124,16 @@ config ARM_OMAP2PLUS_CPUFREQ
depends on ARCH_OMAP2PLUS
default ARCH_OMAP2PLUS

+config ARM_QCOM_CPUFREQ_KRYO
+ bool "Qualcomm Kryo based CPUFreq"
+ depends on QCOM_QFPROM
+ depends on QCOM_SMEM
+ select PM_OPP
+ help
+ This adds the CPUFreq driver for Qualcomm Kryo SoC based boards.
+
+ If in doubt, say N.
+
config ARM_S3C_CPUFREQ
bool
help
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 8d24ade..fb4a2ec 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -65,6 +65,7 @@ obj-$(CONFIG_MACH_MVEBU_V7) += mvebu-cpufreq.o
obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2xx-cpufreq.o
obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o
+obj-$(CONFIG_ARM_QCOM_CPUFREQ_KRYO) += qcom-cpufreq-kryo.o
obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o
obj-$(CONFIG_ARM_S3C2412_CPUFREQ) += s3c2412-cpufreq.o
obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o
diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index 3b585e4..77d6ab8 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -118,6 +118,9 @@

{ .compatible = "nvidia,tegra124", },

+ { .compatible = "qcom,apq8096", },
+ { .compatible = "qcom,msm8996", },
+
{ .compatible = "st,stih407", },
{ .compatible = "st,stih410", },

diff --git a/drivers/cpufreq/qcom-cpufreq-kryo.c b/drivers/cpufreq/qcom-cpufreq-kryo.c
new file mode 100644
index 0000000..2339ea99d
--- /dev/null
+++ b/drivers/cpufreq/qcom-cpufreq-kryo.c
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+/*
+ * In Certain QCOM SoCs like apq8096 and msm8996 that have KRYO processors,
+ * the CPU frequency subset and voltage value of each OPP varies
+ * based on the silicon variant in use. Qualcomm Process Voltage Scaling Tables
+ * defines the voltage and frequency value based on the msm-id in SMEM
+ * and speedbin blown in the efuse combination.
+ * The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
+ * to provide the OPP framework with required information.
+ * This is used to determine the voltage and frequency value for each OPP of
+ * operating-points-v2 table when it is parsed by the OPP framework.
+ */
+
+#include <linux/cpu.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/slab.h>
+#include <linux/soc/qcom/smem.h>
+
+#define MSM_ID_SMEM 137
+
+enum _msm_id {
+ MSM8996V3 = 0xF6ul,
+ APQ8096V3 = 0x123ul,
+ MSM8996SG = 0x131ul,
+ APQ8096SG = 0x138ul,
+};
+
+enum _msm8996_version {
+ MSM8996_V3,
+ MSM8996_SG,
+ NUM_OF_MSM8996_VERSIONS,
+};
+
+static enum _msm8996_version __init qcom_cpufreq_kryo_get_msm_id(void)
+{
+ size_t len;
+ u32 *msm_id;
+ enum _msm8996_version version;
+
+ msm_id = qcom_smem_get(QCOM_SMEM_HOST_ANY, MSM_ID_SMEM, &len);
+ /* The first 4 bytes are format, next to them is the actual msm-id */
+ msm_id++;
+
+ switch ((enum _msm_id)*msm_id) {
+ case MSM8996V3:
+ case APQ8096V3:
+ version = MSM8996_V3;
+ break;
+ case MSM8996SG:
+ case APQ8096SG:
+ version = MSM8996_SG;
+ break;
+ default:
+ version = NUM_OF_MSM8996_VERSIONS;
+ }
+
+ return version;
+}
+
+static int qcom_cpufreq_kryo_probe(struct platform_device *pdev)
+{
+ struct opp_table *opp_tables[NR_CPUS] = {0};
+ struct platform_device *cpufreq_dt_pdev;
+ enum _msm8996_version msm8996_version;
+ struct nvmem_cell *speedbin_nvmem;
+ struct device_node *np;
+ struct device *cpu_dev;
+ unsigned cpu;
+ u8 *speedbin;
+ u32 versions;
+ size_t len;
+ int ret;
+
+ cpu_dev = get_cpu_device(0);
+ if (NULL == cpu_dev)
+ return -ENODEV;
+
+ msm8996_version = qcom_cpufreq_kryo_get_msm_id();
+ if (NUM_OF_MSM8996_VERSIONS == msm8996_version) {
+ dev_err(cpu_dev, "Not Snapdragon 820/821!");
+ return -ENODEV;
+ }
+
+ np = dev_pm_opp_of_get_opp_desc_node(cpu_dev);
+ if (IS_ERR(np))
+ return PTR_ERR(np);
+
+ if (!of_device_is_compatible(np, "operating-points-v2-kryo-cpu")) {
+ of_node_put(np);
+ return -ENOENT;
+ }
+
+ speedbin_nvmem = of_nvmem_cell_get(np, NULL);
+ of_node_put(np);
+ if (IS_ERR(speedbin_nvmem)) {
+ dev_err(cpu_dev, "Could not get nvmem cell: %d\n", ret);
+ return PTR_ERR(speedbin_nvmem);
+ }
+
+ speedbin = nvmem_cell_read(speedbin_nvmem, &len);
+ nvmem_cell_put(speedbin_nvmem);
+
+ switch (msm8996_version) {
+ case MSM8996_V3:
+ versions = 1 << (unsigned int)(*speedbin);
+ break;
+ case MSM8996_SG:
+ versions = 1 << ((unsigned int)(*speedbin) + 4);
+ break;
+ default:
+ BUG();
+ break;
+ }
+
+ for_each_possible_cpu(cpu) {
+ cpu_dev = get_cpu_device(cpu);
+ if (NULL == cpu_dev) {
+ ret = -ENODEV;
+ goto free_opp;
+ }
+
+ opp_tables[cpu] = dev_pm_opp_set_supported_hw(cpu_dev,
+ &versions, 1);
+ if (IS_ERR(opp_tables[cpu])) {
+ ret = PTR_ERR(opp_tables[cpu]);
+ dev_err(cpu_dev, "Failed to set supported hardware\n");
+ goto free_opp;
+ }
+ }
+
+ cpufreq_dt_pdev = platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
+ if (!IS_ERR(cpufreq_dt_pdev))
+ return 0;
+
+ ret = PTR_ERR(cpufreq_dt_pdev);
+ dev_err(cpu_dev, "Failed to register platform device\n");
+
+free_opp:
+ for_each_possible_cpu(cpu) {
+ if (IS_ERR_OR_NULL(opp_tables[cpu]))
+ break;
+ dev_pm_opp_put_supported_hw(opp_tables[cpu]);
+ }
+
+ return ret;
+}
+
+static int __init qcom_cpufreq_kryo_init(void)
+{
+ /*
+ * Since the driver depends on smem and nvmem drivers, which may
+ * return EPROBE_DEFER, all the real activity is done in the probe,
+ * which may be defered as well. The init here is only registering
+ * a platform device.
+ */
+ platform_device_register_simple("qcom-cpufreq-kryo", -1, NULL, 0);
+ return 0;
+}
+module_init(qcom_cpufreq_kryo_init);
+
+static struct platform_driver qcom_cpufreq_kryo_driver = {
+ .probe = qcom_cpufreq_kryo_probe,
+ .driver = {
+ .name = "qcom-cpufreq-kryo",
+ },
+};
+builtin_platform_driver(qcom_cpufreq_kryo_driver);
+
+MODULE_DESCRIPTION("Qualcomm Technologies, Inc. Kryo CPUfreq driver");
+MODULE_LICENSE("GPL v2");
--
1.9.1
\
 
 \ /
  Last update: 2018-05-23 14:40    [W:0.138 / U:1.976 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site