lkml.org 
[lkml]   [2018]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] mtd: cmdlinepart: Update comment for introduction of OFFSET_CONTINUOUS
On Tue, 22 May 2018 17:07:53 +0200
Geert Uytterhoeven <geert+renesas@glider.be> wrote:

> The comment about offset zero was not updated when changing behavior:
> - Automatic offset calculation is indicated by OFFSET_CONTINUOUS,
> - Zero really means offset zero.
>
> Fixes: b175d03dd2072836 ("[PATCH] mtd cmdlinepart: allow zero offset value")
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Applied.

Thanks,

Boris

> ---
> drivers/mtd/cmdlinepart.c | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c
> index fbd5affc0acfe3fe..3ea44cff9b759e3c 100644
> --- a/drivers/mtd/cmdlinepart.c
> +++ b/drivers/mtd/cmdlinepart.c
> @@ -190,7 +190,10 @@ static struct mtd_partition * newpart(char *s,
> extra_mem = (unsigned char *)(parts + *num_parts);
> }
>
> - /* enter this partition (offset will be calculated later if it is zero at this point) */
> + /*
> + * enter this partition (offset will be calculated later if it is
> + * OFFSET_CONTINUOUS at this point)
> + */
> parts[this_part].size = size;
> parts[this_part].offset = offset;
> parts[this_part].mask_flags = mask_flags;

\
 
 \ /
  Last update: 2018-05-23 13:49    [W:0.060 / U:7.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site