lkml.org 
[lkml]   [2018]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH/RFC] ARM: dts: r8a7791: Move enable-method to CPU nodes
Hi Simon,

On Wed, May 23, 2018 at 10:37 AM, Simon Horman <horms@verge.net.au> wrote:
> On Tue, May 22, 2018 at 03:29:25PM +0200, Geert Uytterhoeven wrote:
>> According to Documentation/devicetree/bindings/arm/cpus.txt, the
>> "enable-method" property should be a property of the individual CPU
>> nodes, not of the parent "cpus" node. However, on R-Car M2-W (and on
>> several other arm32 SoCs), the property is tied to the "cpus" node
>> instead.
>>
>> Secondary CPU bringup and CPU hot (un)plug work regardless, as
>> arm_dt_init_cpu_maps() falls back to looking in the "cpus" node.
>>
>> The cpuidle code does not have such a fallback, so it does not detect
>> the enable-method. Note that cpuidle does not support the
>> "renesas,apmu" enable-method yet, so for now this does not make any
>> difference.
>
> Is the implication that if we keep the current binding for cpu nodes
> then at some point we will need to update the cpuidle binding?

If we keep the current binding for cpu nodes, we indeed have to update
(common) Documentation/devicetree/bindings/arm/cpus.txt.

In addition, if we want to add renesas,apmu-based cpuidle support later,
we will have to update the common cpuidle code to look in /cpus, too.

>> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
>> ---
>> Arm64 and powerpc do not have such a fallback, but SH has, like arm32.
>>
>> This is marked RFC, as the alternative is to update the DT bindings to
>> keep the status quo.
>> ---
>> arch/arm/boot/dts/r8a7791.dtsi | 3 ++-
>> 1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
>> index d568bd22d6cbd855..b214cb8f52e47109 100644
>> --- a/arch/arm/boot/dts/r8a7791.dtsi
>> +++ b/arch/arm/boot/dts/r8a7791.dtsi
>> @@ -71,7 +71,6 @@
>> cpus {
>> #address-cells = <1>;
>> #size-cells = <0>;
>> - enable-method = "renesas,apmu";
>>
>> cpu0: cpu@0 {
>> device_type = "cpu";
>> @@ -83,6 +82,7 @@
>> clock-latency = <300000>; /* 300 us */
>> power-domains = <&sysc R8A7791_PD_CA15_CPU0>;
>> next-level-cache = <&L2_CA15>;
>> + enable-method = "renesas,apmu";
>>
>> /* kHz - uV - OPPs unknown yet */
>> operating-points = <1500000 1000000>,
>> @@ -101,6 +101,7 @@
>> clocks = <&cpg CPG_CORE R8A7791_CLK_Z>;
>> power-domains = <&sysc R8A7791_PD_CA15_CPU1>;
>> next-level-cache = <&L2_CA15>;
>> + enable-method = "renesas,apmu";
>> };
>>
>> L2_CA15: cache-controller-0 {

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

\
 
 \ /
  Last update: 2018-05-23 10:51    [W:0.055 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site