lkml.org 
[lkml]   [2018]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3] arm64: allwinner: a64: Add Amarula A64-Relic initial support
On Wed, May 23, 2018 at 11:44:56AM +0530, Jagan Teki wrote:
> On Tue, May 22, 2018 at 8:00 PM, Maxime Ripard
> <maxime.ripard@bootlin.com> wrote:
> > On Tue, May 22, 2018 at 06:52:28PM +0530, Jagan Teki wrote:
> >> Amarula A64-Relic is Allwinner A64 based IoT device, which support
> >> - Allwinner A64 Cortex-A53
> >> - Mali-400MP2 GPU
> >> - AXP803 PMIC
> >> - 1GB DDR3 RAM
> >> - 8GB eMMC
> >> - AP6330 Wifi/BLE
> >> - MIPI-DSI
> >> - CSI: OV5640 sensor
> >> - USB OTG
> >
> > You claim that this is doing OTG...
> >
> > [..]
> >
> >> +&usb_otg {
> >> + dr_mode = "peripheral";
> >> + status = "okay";
> >> +};
> >
> > ... and yet you're setting it as peripheral...
>
> Though it claims OTG, board doesn't have any USB ports to operate(not
> even Mini-AB) the only way to use the board as peripheral to transfer
> images from host.

I'm not sure what you mean here. If there's no USB connector, why do
you even enable it?

maxime

--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-05-23 10:19    [W:0.077 / U:0.544 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site