lkml.org 
[lkml]   [2018]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH] irqchip: gpcv2: remove unnecessary functions
Date
Hi, Marc

Anson Huang
Best Regards!


> -----Original Message-----
> From: Marc Zyngier [mailto:marc.zyngier@arm.com]
> Sent: Wednesday, May 23, 2018 3:23 PM
> To: Anson Huang <anson.huang@nxp.com>
> Cc: tglx@linutronix.de; jason@lakedaemon.net; dl-linux-imx
> <linux-imx@nxp.com>; linux-kernel@vger.kernel.org
> Subject: Re: [PATCH] irqchip: gpcv2: remove unnecessary functions
>
> On Wed, 23 May 2018 07:23:00 +0100,
> Anson Huang wrote:
> >
> > GPC is in always-on domain, it never lost its content during
> > suspend/resume, so no need to do save/restore for it during
> > suspend/resume.
> >
> > Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> > ---
> > drivers/irqchip/irq-imx-gpcv2.c | 41
> > -----------------------------------------
> > 1 file changed, 41 deletions(-)
> >
> > diff --git a/drivers/irqchip/irq-imx-gpcv2.c
> > b/drivers/irqchip/irq-imx-gpcv2.c index 4760307..e6025d9 100644
> > --- a/drivers/irqchip/irq-imx-gpcv2.c
> > +++ b/drivers/irqchip/irq-imx-gpcv2.c
> > @@ -28,46 +28,6 @@ struct gpcv2_irqchip_data {
> >
> > static struct gpcv2_irqchip_data *imx_gpcv2_instance;
> >
> > -static int gpcv2_wakeup_source_save(void) -{
> > - struct gpcv2_irqchip_data *cd;
> > - void __iomem *reg;
> > - int i;
> > -
> > - cd = imx_gpcv2_instance;
> > - if (!cd)
> > - return 0;
> > -
> > - for (i = 0; i < IMR_NUM; i++) {
> > - reg = cd->gpc_base + cd->cpu2wakeup + i * 4;
> > - cd->saved_irq_mask[i] = readl_relaxed(reg);
> > - writel_relaxed(cd->wakeup_sources[i], reg);
> > - }
>
> If you're removing that code, what's the purpose of keeping saved_irq_mask?
>
> Also, who is now programming the wake-up_source? For good or bad reasons,
> this drivers uses the save/restore hooks to program the wake-up state.
> Removing this code seem to simply kill the feature.
>
> What am I missing?
>
> Thanks,

I made a mistake here, forgot to program the wakeup source into GPC IMR register
In imx_gpcv2_irq_set_wake function.
And I think we can remove the saved_irq_mask as well, will do it in V2.

The wake-up source is programmed by module driver calling "enable_irq_wake" if
device wakeup capability is enabled, and I miss to program into GPC IMR register. Will
fix it later. Thanks.

Anson.

>
> M.
>
> --
> Jazz is not dead, it just smell funny.

\
 
 \ /
  Last update: 2018-05-23 09:35    [W:0.041 / U:1.676 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site