lkml.org 
[lkml]   [2018]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [REGRESSION] v4.17-rc4: xgalaga fails to start in fullscreen (default) mode
On Wed, May 23, 2018 at 03:27:34PM -0700, Vito Caputo wrote:
> On Wed, May 23, 2018 at 02:27:48PM -0700, Vito Caputo wrote:
> > On Wed, May 23, 2018 at 11:41:25PM +0300, Ville Syrjälä wrote:
> > > On Wed, May 23, 2018 at 01:15:05PM -0700, Vito Caputo wrote:
> > > > On Wed, May 23, 2018 at 10:12:22PM +0300, Ville Syrjälä wrote:
> > > > > On Wed, May 23, 2018 at 11:39:00AM -0700, Vito Caputo wrote:
> > > > > > On Wed, May 23, 2018 at 09:20:37PM +0300, Ville Syrjälä wrote:
> > > > > > > On Wed, May 23, 2018 at 11:06:00AM -0700, Vito Caputo wrote:
> > > > > > > > On Wed, May 23, 2018 at 04:18:05PM +0300, Ville Syrjälä wrote:
> > > > > > > > > On Wed, May 23, 2018 at 02:49:19AM -0700, Vito Caputo wrote:
> > > > > > > > > > On Mon, May 21, 2018 at 02:57:18PM -0700, Vito Caputo wrote:
> > > > > > > > > > > On Mon, May 21, 2018 at 12:53:20PM -0700, Vito Caputo wrote:
> > > > > > > > > > > > Hello all,
> > > > > > > > > > > >
> > > > > > > > > > > > 4.17-rc4 (my latest kernel ATM) consistently fails to start xgalaga
> > > > > > > > > > > > without -window. I will try find time to build the latest rc this
> > > > > > > > > > > > evening.
> > > > > > > > > > > >
> > > > > > > > > > > > > ~$ xgalaga
> > > > > > > > > > > > > X Error of failed request: BadValue (integer parameter out of range for operation)
> > > > > > > > > > > > > Major opcode of failed request: 152 (XFree86-VidModeExtension)
> > > > > > > > > > > > > Minor opcode of failed request: 10 (XF86VidModeSwitchToMode)
> > > > > > > > > > > > > Value in failed request: 0x120004e
> > > > > > > > > > > > > Serial number of failed request: 199
> > > > > > > > > > > > > Current serial number in output stream: 203
> > > > > > > > > > > >
> > > > > > > > > > > > Haven't dug into this much yet, only did a perfunctory check by booting into a
> > > > > > > > > > > > few older kernels (4.11, 4.12, 4.16) and the problem is absent on all of them.
> > > > > > > > > > > > It appears to be a 4.17-specific regression right now.
> > > > > > > > > > > >
> > > > > > > > > > > > Also observed, though this is surely a different regression, the game
> > > > > > > > > > > > ran like molasses with -window, showing some prominent kworkers in top:
> > > > > > > > > > > >
> > > > > > > > > > > > 692 vc 20 0 312852 45884 20556 R 32.0 1.2 0:08.69 Xorg
> > > > > > > > > > > > 102 root 20 0 0 0 0 R 11.2 0.0 0:01.43 kworker/1:3
> > > > > > > > > > > > 94 root 20 0 0 0 0 I 8.9 0.0 0:00.83 kworker/0:2
> > > > > > > > > > > > 696 vc 20 0 39948 4124 2912 S 1.0 0.1 0:05.57 vwm
> > > > > > > > > > > > 902 vc 30 10 46372 4144 3500 S 0.7 0.1 0:00.08 xgalaga
> > > > > > > > > > > > 891 vc 30 10 44924 3868 3156 R 0.3 0.1 0:00.09 top
> > > > > > > > > > > > 903 vc 30 10 4180 1184 1100 S 0.3 0.0 0:00.01 xgal.sndsrv.oss
> > > > > > > > > > > >
> > > > > > > > > > > > The windowed performance issue was observed on the older kernels tested
> > > > > > > > > > > > as well, though 4.11 felt better and didn't have the busy kworkers.
> > > > > > > > > > > >
> > > > > > > > > > > > I have not attempted to play xgalaga for ages, but it used to be perfectly
> > > > > > > > > > > > playable on this machine in windowed mode when I last did.
> > > > > > > > > > > >
> > > > > > > > > > > > Machine is the venerable Thinkpad X61s, 1.8Ghz, Debian 9, config attached.
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > Just built and booted v4.17-rc6, still broken.
> > > > > > > > > >
> > > > > > > > > > Bisected to:
> > > > > > > > > >
> > > > > > > > > > e995ca0b8139c5f6807095464e969931b443f55a is the first bad commit
> > > > > > > > > > commit e995ca0b8139c5f6807095464e969931b443f55a
> > > > > > > > > > Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > > > > > > > > > Date: Tue Nov 14 20:32:58 2017 +0200
> > > > > > > > > >
> > > > > > > > > > drm/i915: Provide a device level .mode_valid() hook
> > > > > > > > > >
> > > > > > > > > > We never support certain mode flags etc. Reject those early on in the
> > > > > > > > > > mode_config.mode_valid() hook. That allows us to remove some duplicated
> > > > > > > > > > checks from the connector .mode_valid() hooks, and it guarantees that
> > > > > > > > > > we never see those flags even from user mode as the
> > > > > > > > > > mode_config.mode_valid() hooks gets executed for those as well.
> > > > > > > > > >
> > > > > > > > > > Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > > > > > > > > > Link: https://patchwork.freedesktop.org/patch/msgid/20171114183258.16976-11-ville.syrjala@linux.intel.com
> > > > > > > > > > Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
> > > > > > > > >
> > > > > > > > > Hmm. I guess xgalaga passes some garbage in via xf86vidmode which
> > > > > > > > > the ddx doesn't validate before passing it on to the kernel. So far
> > > > > > > > > I can't reproduce the problem here unfortnately.
> > > > > > > > >
> > > > > > > > > Can you try the following patch and reproduce the problem with
> > > > > > > > > drm.debug=0xe passed to the kernel so that we can seewhat the bad
> > > > > > > > > modeline looks like?
> > > > > > > > >
> > > > > > > >
> > > > > > > > dmesg after xgalaga fails:
> > > > > > > >
> > > > > > > > ```
> > > > > > > > [ 75.617448] [drm:drm_mode_convert_umode] Bad user mode:
> > > > > > > > [ 75.617455] [drm:drm_mode_debug_printmodeline] Modeline 57:"800x600" 0 81000 800 832 928 1080 600 600 602 625 0x0 0x25
> > > > > > >
> > > > > > > 0x20 == dblscan
> > > > > > >
> > > > > > > > [ 75.617458] [drm:drm_mode_setcrtc] Invalid mode
> > > > > > > > ```
> > > > > > > >
> > > > > > > > xrandr --verbose:
> > > > > > > >
> > > > > > > > ```
> > > > > > > > Screen 0: minimum 320 x 200, current 1024 x 768, maximum 8192 x 8192
> > > > > > > > LVDS-1 connected primary 1024x768+0+0 (0x44) normal (normal left inverted right x axis y axis) 246mm x 184mm
> > > > > > > > Identifier: 0x41
> > > > > > > > Timestamp: 23375
> > > > > > > > Subpixel: horizontal rgb
> > > > > > > > Gamma: 1.0:1.0:1.0
> > > > > > > > Brightness: 1.0
> > > > > > > > Clones:
> > > > > > > > CRTC: 0
> > > > > > > > CRTCs: 0 1
> > > > > > > > Transform: 1.000000 0.000000 0.000000
> > > > > > > > 0.000000 1.000000 0.000000
> > > > > > > > 0.000000 0.000000 1.000000
> > > > > > > > filter:
> > > > > > > > EDID:
> > > > > > > > 00ffffffffffff0030ae004000000000
> > > > > > > > 3010010380191278eafe609555518726
> > > > > > > > 22505421080001010101010101010101
> > > > > > > > 01010101010128150040410026301888
> > > > > > > > 3600f6b800000018ed10004041002630
> > > > > > > > 18883600f6b9000000180000000f0061
> > > > > > > > 43326143280f01000daf0714000000fe
> > > > > > > > 004e31323158352d4c303620202000ed
> > > > > > > > scaling mode: Full aspect
> > > > > > > > supported: Full, Center, Full aspect
> > > > > > > > non-desktop: 0
> > > > > > > > range: (0, 1)
> > > > > > > > link-status: Good
> > > > > > > > supported: Good, Bad
> > > > > > > > 1024x768 (0x44) 54.160MHz -HSync -VSync *current +preferred
> > > > > > > > h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 40.30KHz
> > > > > > > > v: height 768 start 771 end 777 total 806 clock 50.00Hz
> > > > > > > > 1024x768 (0x45) 65.000MHz -HSync -VSync
> > > > > > > > h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.36KHz
> > > > > > > > v: height 768 start 771 end 777 total 806 clock 60.00Hz
> > > > > > > > 1024x768 (0x46) 43.330MHz -HSync -VSync
> > > > > > > > h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 32.24KHz
> > > > > > > > v: height 768 start 771 end 777 total 806 clock 40.00Hz
> > > > > > > > 960x720 (0x47) 117.000MHz -HSync +VSync DoubleScan
> > > > > > > > h: width 960 start 1024 end 1128 total 1300 skew 0 clock 90.00KHz
> > > > > > > > v: height 720 start 720 end 722 total 750 clock 60.00Hz
> > > > > > > > 928x696 (0x48) 109.150MHz -HSync +VSync DoubleScan
> > > > > > > > h: width 928 start 976 end 1088 total 1264 skew 0 clock 86.35KHz
> > > > > > > > v: height 696 start 696 end 698 total 719 clock 60.05Hz
> > > > > > >
> > > > > > > Where are all these dblscan modes coming from?
> > > > > > >
> > > > > > > Did you add them manually or are they being automatically
> > > > > > > generated by something?
> > > > > > >
> > > > > >
> > > > > > This is pure automagic xserver-xorg-video-intel on i915 drm/kms.
> > > > > >
> > > > > > After booting back into a working 4.16 kernel I see the same xrandr --verbose
> > > > > > list with all the DoubleScan modes, with which xgalaga is functional.
> > > > > >
> > > > > > There's this in the Xorg.log:
> > > > > >
> > > > > > ```
> > > > > > [ 12.856] (II) intel(0): Output LVDS1 using monitor section Monitor0
> > > > > > [ 12.857] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
> > > > > > [ 12.882] (II) intel(0): Output VGA1 has no monitor section
> > > > > > [ 12.883] (II) intel(0): EDID for output LVDS1
> > > > > > [ 12.883] (II) intel(0): Manufacturer: LEN Model: 4000 Serial#: 0
> > > > > > [ 12.883] (II) intel(0): Year: 2006 Week: 48
> > > > > > [ 12.883] (II) intel(0): EDID Version: 1.3
> > > > > > [ 12.883] (II) intel(0): Digital Display Input
> > > > > > [ 12.883] (II) intel(0): Max Image Size [cm]: horiz.: 25 vert.: 18
> > > > > > [ 12.883] (II) intel(0): Gamma: 2.20
> > > > > > [ 12.883] (II) intel(0): DPMS capabilities: StandBy Suspend Off
> > > > > > [ 12.883] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
> > > > > > [ 12.883] (II) intel(0): First detailed timing is preferred mode
> > > > > > [ 12.883] (II) intel(0): redX: 0.585 redY: 0.335 greenX: 0.319 greenY: 0.529
> > > > > > [ 12.883] (II) intel(0): blueX: 0.149 blueY: 0.135 whiteX: 0.312 whiteY: 0.328
> > > > > > [ 12.883] (II) intel(0): Supported established timings:
> > > > > > [ 12.883] (II) intel(0): 640x480@60Hz
> > > > > > [ 12.883] (II) intel(0): 800x600@60Hz
> > > > > > [ 12.883] (II) intel(0): 1024x768@60Hz
> > > > > > [ 12.883] (II) intel(0): Manufacturer's mask: 0
> > > > > > [ 12.883] (II) intel(0): Supported detailed timing:
> > > > > > [ 12.883] (II) intel(0): clock: 54.2 MHz Image Size: 246 x 184 mm
> > > > > > [ 12.883] (II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
> > > > > > [ 12.883] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
> > > > > > [ 12.883] (II) intel(0): Supported detailed timing:
> > > > > > [ 12.883] (II) intel(0): clock: 43.3 MHz Image Size: 246 x 185 mm
> > > > > > [ 12.883] (II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
> > > > > > [ 12.883] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
> > > > > > [ 12.883] (II) intel(0): Unknown vendor-specific block f
> > > > > > [ 12.883] (II) intel(0): N121X5-L06
> > > > > > [ 12.883] (II) intel(0): EDID (in hex):
> > > > > > [ 12.883] (II) intel(0): 00ffffffffffff0030ae004000000000
> > > > > > [ 12.883] (II) intel(0): 3010010380191278eafe609555518726
> > > > > > [ 12.883] (II) intel(0): 22505421080001010101010101010101
> > > > > > [ 12.883] (II) intel(0): 01010101010128150040410026301888
> > > > > > [ 12.883] (II) intel(0): 3600f6b800000018ed10004041002630
> > > > > > [ 12.883] (II) intel(0): 18883600f6b9000000180000000f0061
> > > > > > [ 12.883] (II) intel(0): 43326143280f01000daf0714000000fe
> > > > > > [ 12.883] (II) intel(0): 004e31323158352d4c303620202000ed
> > > > > > [ 12.883] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
> > > > > > [ 12.883] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
> > > > > > [ 12.883] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
> > > > > > [ 12.883] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
> > > > > > [ 12.883] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
> > > > > > [ 12.883] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
> > > > > > [ 12.883] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
> > > > > > [ 12.883] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
> > > > > > [ 12.883] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
> > > > > > [ 12.883] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
> > > > > > [ 12.883] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
> > > > > > [ 12.883] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
> > > > > > [ 12.883] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
> > > > > > [ 12.883] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
> > > > > > [ 12.883] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
> > > > > > [ 12.883] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
> > > > > > [ 12.883] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
> > > > > > [ 12.883] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
> > > > > > [ 12.884] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
> > > > > > [ 12.884] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
> > > > >
> > > > > So first it rejected them all, but somehow later they get added back?
> > > > > Very odd.
> > > > >
> > > > > Hmm. Must be coming from that default modes thing...
> > > > >
> > > > > Looks pretty much like ddx bug to me. Does the following ddx patch get
> > > > > rid of the bogus dblscan modes?
> > > > >
> > > >
> > > > <snip>
> > > >
> > > > No, that didn't seem to change anything. After some digging, I found:
> > > >
> > > > xorg-server-1.19.2/hw/xfree86/drivers/modesetting/drmmode_display.c::drmmode_output_init():
> > > >
> > > > ```
> > > > 1796 drmmode_output->output_id = mode_res->connectors[num];
> > > > 1797 drmmode_output->mode_output = koutput;
> > > > 1798 drmmode_output->mode_encoders = kencoders;
> > > > 1799 drmmode_output->drmmode = drmmode;
> > > > 1800 output->mm_width = koutput->mmWidth;
> > > > 1801 output->mm_height = koutput->mmHeight;
> > > > 1802
> > > > 1803 output->subpixel_order = subpixel_conv_table[koutput->subpixel];
> > > > 1804 output->interlaceAllowed = TRUE;
> > > > 1805 output->doubleScanAllowed = TRUE;
> > > > 1806 output->driver_private = drmmode_output;
> > > > ```
> > >
> > > That's the modesetting ddx. Irrelevant as long as you're using the intel
> > > ddx.
> > >
> >
> > Hmm, that should have been obvious given the path, clearly I'm not
> > familiar with how this is structured. Xorg cannot start without
> > modesetting_drv.so, even when using intel_drv.so, so I thought they were
> > more intimately sharing functionality.
> >
> > I wonder why the change didn't work then; intel_output_init() doesn't
> > set doubleScanAllowed=TRUE and xf86OutputCreate() uses calloc() so...
> >
>
> I just noticed something important. I've been looking at old Xorg logs
> in /var/log, it appears at some point these things moved into
> ~/.local/share/xorg/.
>
> Look at the *current* logs, it looks like my xorg is using the modeset
> driver. This explains why removing modeset_drv.so breaks things.
>
> It also explains why your xorg-video-intel patch made no difference.
>
> As the code excerpt above illustrates, the modeset driver is enabling
> both interlaceAllowed and doubleScanAllowed, so we know where it's
> getting those.
>
> Apologies for any confusion, my /var/log/ is full of Xorg.%i.log files
> but they're from 2017 *sigh*.
>

I've just built and tested the modesetting driver with:
- output->doubleScanAllowed = TRUE;
+ output->doubleScanAllowed = FALSE;

and it fixes xgalaga on 4.17-rc6.

xrandr --verbose output is now:

```
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 8192 x 8192
LVDS-1 connected primary 1024x768+0+0 (0x44) normal (normal left inverted right x axis y axis) 246mm x 184mm
Identifier: 0x41
Timestamp: 16465276
Subpixel: horizontal rgb
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 0
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
EDID:
00ffffffffffff0030ae004000000000
3010010380191278eafe609555518726
22505421080001010101010101010101
01010101010128150040410026301888
3600f6b800000018ed10004041002630
18883600f6b9000000180000000f0061
43326143280f01000daf0714000000fe
004e31323158352d4c303620202000ed
scaling mode: Full aspect
supported: Full, Center, Full aspect
non-desktop: 0
range: (0, 1)
link-status: Good
supported: Good, Bad
1024x768 (0x44) 54.160MHz -HSync -VSync *current +preferred
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 40.30KHz
v: height 768 start 771 end 777 total 806 clock 50.00Hz
1024x768 (0x45) 65.000MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.36KHz
v: height 768 start 771 end 777 total 806 clock 60.00Hz
1024x768 (0x46) 43.330MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 32.24KHz
v: height 768 start 771 end 777 total 806 clock 40.00Hz
800x600 (0x47) 40.000MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.88KHz
v: height 600 start 601 end 605 total 628 clock 60.32Hz
800x600 (0x48) 36.000MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.16KHz
v: height 600 start 601 end 603 total 625 clock 56.25Hz
640x480 (0x49) 25.175MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.47KHz
v: height 480 start 490 end 492 total 525 clock 59.94Hz
VGA-1 disconnected (normal left inverted right x axis y axis)
Identifier: 0x42
Timestamp: 16465276
Subpixel: unknown
Clones:
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
non-desktop: 0
range: (0, 1)
link-status: Good
supported: Good, Bad
```

So if you're going to fix the xserver-xorg-video-intel driver, it looks like
the modesetting driver should also be corrected in the same way.

Now to figure out why Debian doesn't package modesetting_drv.so as
xserver-xorg-video-$variant, which results in requiring something like
xserver-xorg-video-intel even when modesetting is in use.

Regards,
Vito Caputo

\
 
 \ /
  Last update: 2018-05-24 02:22    [W:0.055 / U:5.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site