lkml.org 
[lkml]   [2018]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V1 3/3] mmc: host: Register changes for sdcc V5
On Thu, May 17, 2018 at 03:58:58PM +0530, Vijay Viswanath wrote:
> From: Sayali Lokhande <sayalil@codeaurora.org>
>
> For SDCC version 5.0.0 and higher, new compatible string
> "qcom,sdhci-msm-v5" is added.
>
> Based on the msm variant, pick the relevant variant data and
> use it for register read/write to msm specific registers.
>
> Signed-off-by: Sayali Lokhande <sayalil@codeaurora.org>
> Signed-off-by: Vijay Viswanath <vviswana@codeaurora.org>
> ---
> .../devicetree/bindings/mmc/sdhci-msm.txt | 5 +-

Please split binding patches.

> drivers/mmc/host/sdhci-msm.c | 344 +++++++++++++--------
> 2 files changed, 222 insertions(+), 127 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
> index bfdcdc4..c2b7b2b 100644
> --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
> +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
> @@ -4,7 +4,10 @@ This file documents differences between the core properties in mmc.txt
> and the properties used by the sdhci-msm driver.
>
> Required properties:
> -- compatible: Should contain "qcom,sdhci-msm-v4".
> +- compatible: Should contain "qcom,sdhci-msm-v4" or "qcom,sdhci-msm-v5".

Format with 1 per line.

> + For SDCC version 5.0.0, MCI registers are removed from SDCC
> + interface and some registers are moved to HC. New compatible
> + string is added to support this change - "qcom,sdhci-msm-v5".
> - reg: Base address and length of the register in the following order:
> - Host controller register map (required)
> - SD Core register map (required)

\
 
 \ /
  Last update: 2018-05-22 21:46    [W:0.123 / U:4.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site