[lkml]   [2018]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH 0/5] Enhance support for the SP805 WDT
This patch series enhances the support for the SP805 watchdog timer.
First of all, 'timeout-sec' devicetree property is added. In addition,
support is also added to allow the driver to reset the watchdog if it
has been detected that watchdot has been started in the bootloader. In
this case, the driver will initiate the ping service from the kernel
watchdog subsystem, before a user mode daemon takes over. This series
also enables SP805 in the default ARM64 defconfig

This patch series is based off v4.17-rc5 and is available on GIHUB:
branch: sp805-wdt-v1

Ray Jui (5):
Documentation: DT: Add optional 'timeout-sec' property for sp805
watchdog: sp805: add 'timeout-sec' DT property support
watchdog: sp805: set WDOG_HW_RUNNING when appropriate
arm64: dt: set initial SR watchdog timeout to 60 seconds
arm64: defconfig: add CONFIG_ARM_SP805_WATCHDOG

.../devicetree/bindings/watchdog/sp805-wdt.txt | 2 ++
.../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 1 +
arch/arm64/configs/defconfig | 1 +
drivers/watchdog/sp805_wdt.c | 31 +++++++++++++++++++++-
4 files changed, 34 insertions(+), 1 deletion(-)


 \ /
  Last update: 2018-05-22 20:48    [W:0.099 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site